• Title/Summary/Keyword: 수렴특성

Search Result 995, Processing Time 0.029 seconds

The Experimental Study on the Long-term Creep Settlements of Nam-Hae Sands (남해안 모래의 장기 크리프 침하 특성에 관한 실험적 연구)

  • Park, Eonsang
    • Journal of the Korean GEO-environmental Society
    • /
    • v.19 no.9
    • /
    • pp.21-28
    • /
    • 2018
  • In this study, a standard consolidation test (Oedometer) was performed on the relative density of sand in the south coast to evaluate long-term creep settlement characteristics. Experimental results show that the cumulative settlement at the final loading stage decreases as the relative density increases and the variation of the void ratio decreases. As a result of analyzing the settlement rate of long-term creep of sand, creep settlement of 4.7~11.0% occurred depending on relative density with respect to total settlement. The creep parameter, Beta, of Schmertmann et al. (1978) was estimated to be 0.17~0.40 (average 0.21), and it tended to converge to a certain value when the load step becomes more than a certain level. It was found that there is no significant difference in the creep parameter depending on the layer thickness, and it was confirmed that the creep parameter could be applied regardless of the field layer thickness.

Rotor Flux Estimation of an Induction Motor using the Extended Luenberger Observer (확장된 루엔버거 관측기를 이용한 유도전동기 회전자 자속 추정)

  • 조금배;최연옥;정삼용
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.6 no.2
    • /
    • pp.115-124
    • /
    • 2001
  • In this paper, authors propose a new nonlinear rotor flux observer for rotor field oriented control of an induction motor which is designed based on the extended Luenberger Observer theory. Extended Luenberger Observer requires minimal solution of nonlinear partial differential equation on its coordinate transformation and linearization needed on a nonlinear observer design in general. The proposed rotor flux observer is derived from the 2 phase model of induction motor on the orthogonal coordination and it has the reduce gain matrix. Simulation and experimentation were performed under the conventional indirect vector control and direct vector control with the proposed observer at different rotor resistance. Simulation results show that the convergence of the proposed observer is influenced by the chosen eigenvalues. Experimentation results on load operation show the direct vector control with the proposed observer is better than the indirect vector control to maintain the characteristics of the vector control.

  • PDF

An Improved Function Synthesis Algorithm Using Genetic Programming (유전적 프로그램을 이용한 함수 합성 알고리즘의 개선)

  • Jung, Nam-Chae
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.11 no.1
    • /
    • pp.80-87
    • /
    • 2010
  • The method of function synthesis is essential when we control the systems not known their characteristic, by predicting the function to satisfy a relation between input and output from the given pairs of input-output data. In general the most systems operate non-linearly, it is easy to come about problem is composed with combinations of parameter, constant, condition, and so on. Genetic programming is proposed by one of function synthesis methods. This is a search method of function tree to satisfy a relation between input and output, with appling genetic operation to function tree to convert function into tree structure. In this paper, we indicate problems of a function synthesis method by an existing genetic programming propose four type of new improved method. In other words, there are control of function tree growth, selection of local search method for early convergence, effective elimination of redundancy in function tree, and utilization of problem characteristic of object, for preventing function from complicating when the function tree is searched. In case of this improved method, we confirmed to obtain superior structure to function synthesis method by an existing genetic programming in a short period of time by means of computer simulation for the two-spirals problem.

Experimental Study on Unsteady-state Characteristics of a Pintle Thruster with Variable Pintle Speeds (핀틀 구동속도에 따른 핀틀 추력기의 비정상상태 특성에 대한 실험적 연구)

  • Hwang, Heuiseong;Huh, Hwanil
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.44 no.3
    • /
    • pp.247-255
    • /
    • 2016
  • The purpose of this study is to investigate unsteady-state characteristics of a pintle thruster with various pintle speed. Based on steady state experimental results, non-linear pintle stroke equation is obtained and applied to the unsteady state experimental system. For the unsteady state experiments, three different pintle speeds are used: 3.10 mm/s, 5.65 mm/s, 10.83 mm/s, respectively. Results show that backward pintle stroke results in faster convergence time because of high chamber pressure during backward pintle stroke sequence. During the forward and backward process, thrust curve shows singular points. These phenomenons is caused by variation of mass flow rate, which is mainly due to changes of both chamber pressures and nozzle throat area. This behavior becomes distinctive for a faster pintle speed case.

Analysis of Vegetation Characteristics of Close-to-nature Creek Improvement (자연형 소하천정비사업의 식생특성 분석)

  • Yeon, Gyu-Bang;Kang, Sang-Jun;Yun, Kang-Hun;Lee, Jong-Hyung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.657-661
    • /
    • 2007
  • 본 연구에서는 자연형 소하천정비 시범사업 중에서 2003년 하천정비공사가 완료된 후 식생의 침입과 정착하는 과정을 조사함으로서 교란된 하천을 자연형 하천으로 복원하는데 생태학적으로 어떤 공법이 최적의 공법인가를 알아보고자 각 호안공법 별로 식생의 변화특성을 분석한 것으로 결론은 다음과 같다. 이동 소하천에 적용된 다양한 공법(자연석 쌓기, 식생축조블록, 그린리버(환경)블록, 스톤넷, 친환경 돌망태, 식생매트, 환경블록 H형, 반딧불 블록, 지오그린셀, 자연석 3단쌓기 호안)으로 정비된 자연형 하천 복원 후의 식생조성과 목본식물의 침입 및 정착 과정을 조사하였다. 9가지의 공법 중에서 식생 조성과 목본식물의 침입과 정착에 양호하다고 판단된 공법은 자연석 2단 및 3단 쌓기가 가장 좋다고 판단되었고, 그 다음은 지오그린셀 공법, 식생 매트 공법 그리고 그린리버 공법의 순이었다. 친환경 돌망태 공법, 환경블록 공법, 환경 H블록 공법, 식생 축조 블록 공법 및 반딧불 블록 공법은 다른 공법에 비하여 적절하지 못한 공법이었다. 각 공법 간 식생 조성의 유사도 비교에 의하면 시간이 지남에 따라 하천 복원 후 하천 변의 식생이 한 방향으로 서서히 수렴되어 가고 있었다. 하천 공법에 관계없이 봄에 침입하는 식물을 보면 둑의 사면에는 갈퀴나물, 큰김의털, 쑥, 환삼덩굴, 점나도나물 이었고, 수로에는 고마리, 소리쟁이, 미나리, 개구리자리였다. 여름에는 둑 사면에 망초, 억새, 환삼덩굴, 토끼풀이, 수로에는 고마리, 미나리, 미국가막사리, 닭의장풀, 그리고 가을에 많이 침입한 식물은 사면에 파종된 외래식물인 큰김의털, 식재한 억새, 강아지풀 및 환삼덩굴이었음을 알 수 있었다. 처음 침입한 목본은 갯버들, 아카시나무, 내버들 및 버드나무 등 4종이었으나, 1년 후에는 싸리, 산딸기, 쥐똥나무 및 뽕나무가 새로 침입하였다. 이렇게 침입한 목본식물들은 복원된 하천에 다른 물리적인 교란이 심하게 가해지지 않는다면 당분간 계속 생장할 것으로 사료된다.

  • PDF

유기물에서 내부의 트랩 분포 변화에 따른 전자 이동도 현상

  • Yu, Ju-Hyeong;Kim, Dong-Hun;Kim, Tae-Hwan
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.416-416
    • /
    • 2012
  • 유기물을 기반으로 하는 유기발광소자, 유기메모리 및 유기 태양전지 등과 같은 차세대 전자소자는 기존의 무기물 기반의 소자에 비해 가격이 싸고 제작방법이 간단하며 휘어지게 만들 수 있다는 장점을 갖기 때문에 많은 관심을 받고 있다. 유기물을 기반으로 한 전자 소자의 효율을 향상시키기 위해서는 유기물질이 갖는 고유의 물리적 특성에 관한 연구가 중요하다. 특히, 유기물 내에서의 전하 전송 메카니즘을 이해하기 위해 유기물의 전자 이동도에 대한 연구가 중요하나, 아직까지 유기물질을 기반으로 한 전자 소자의 전자 이동도에 대한 이론적인 연구가 비교적 적다. 본 연구에서는 유기물 내에서의 트랩 분포 변화에 따른 전자 이동도를 몬테카를로 방법을 이용하여 계산하였다. 시뮬레이션을 위한 기본 구조로 소자의 길이는 30-300 사이트로 하였으며, 이웃한 사이트간 거리는 $3{\acute{\AA}}$로 결정하였다. 유기물 내에 존재하는 트랩의 분포는 가우시안 분포로 가정하였고, 트랩의 분산도와 트랩 총량을 변화시켜 계산하였다. 이웃한 트랩간의 천이 확률을 Miller and Abrahams 식을 이용하여 계산하고, 트랩간의 천이시간을 랜덤 변수로 결정하였고, 이들을 통계적으로 처리하여 유기물 내에서의 전자 이동도를 계산하였다. 시뮬레이션 결과는 유기물의 트랩분포가 일정할 경우 전자 이동도는 전계가 증가함에 따라 일정하게 증가하다가 일정 전계에서 포화된 후 다시 감소한다. 초기의 전계 영역에서는 전계의 증가에 따라 유기물 내 트랩간의 천이 확률이 증가하기 때문에 전자 이동도가 증가한다. 하지만, 일정 전계 이상에서는 전자의 이동 속도가 거의 변하지 않기 때문에, 전계의 증가에 따라 전자 이동도는 오히려 줄어들게 된다. 트랩의 분산도가 증가함에 따라 낮은 전계 영역에서는 전자 이동도가 작고, 전계가 증가할수록 분산도와 상관없이 전자 이동도가 비슷한 값으로 수렴한다. 트랩의 분산도가 30 meV로 작을 경우에 일정 온도 이상에서의 전자 이동도는 포화되어 일정한 값으로 유지한다. 유기물 내에 존재하는 트랩 분포에 따라 온도의 변화가 전자 이동도에 미치는 영향이 달라짐을 알 수 있다. 이러한 결과는 유기물질을 기반으로 한 전자소자에서의 전하 전송 메카니즘을 이해하고 소자의 제작 및 특성 향상에 도움이 된다고 생각한다.

  • PDF

Magnetism of Ferric Iron Oxide and Its Significance in Martian Lithosphere (화성 암권의 진화해석을 위한 예비연구: 3가철 산화물의 자화특성)

  • Jeong, Doo-Hee;Yu, Yong-Jae
    • Journal of the Mineralogical Society of Korea
    • /
    • v.24 no.3
    • /
    • pp.189-194
    • /
    • 2011
  • Martian satellite missions indicate that Martian equatorial plains are covered by ferric iron oxide. As a non-destructive technique, low-temperature treatment of remanent magnetization is effective in identifying magnetic minerals in rocks. In the present study, four sets of ferric iron oxides were prepared by aqueous alteration of ferrihydrite at warm conditions and four others by dehydration of goethite. As the amount of aluminous trivalent cations increases, crystallographic lattice parameters and N$\acute{e}$el temperatures decrease. Such declines originate from lattice distortion as the smaller aluminous trivalent cations substitue the larger terric irons. Whilst high remanence memory was observed for aqueously produced ferric iron oxide, low remanence memory was observed for dehydrated ferric iron oxide. In the future. magnetic remanence memory would be powerful in diagnosing the origin of ferric iron oxide.

An Analysis on Change of Learning Styles of Third Grade Gifted Students by Applying the Gifted Mathematics Program (수학영재프로그램 적용을 통한 초등학교 3학년 영재학생들의 학습유형 변화 분석)

  • Yu, Migyoung;Chang, Hyewon
    • Journal of Elementary Mathematics Education in Korea
    • /
    • v.19 no.4
    • /
    • pp.609-624
    • /
    • 2015
  • It is well-known that every learner has his/her own learning style and the learning style has a great effect on his/her learning characteristics, processes and achievements. This study aims to induce some implications for designing the gifted mathematics programs which go with gifted students' learning styles. To do this, we applied the gifted mathematics program of nine lessons to 52 third grade gifted students and examined the characteristics of the programs according Kolb's learning style. To investigate the effect of the program, the pretest and posttest for applying the programs were taken and the results of two tests were analysed by t-test. As a result, the students of diverging style increased and the ones of converging style decreased, while there is little change in the accommodating style and the assimilating style. It was also shown that the average of the concrete experience(CE) of the subjects has increased significantly. This study also contains some pedagogical implications based on discussing about the results of analysis.

Laboratory Model Tests on the Load Transfer in Geosynthetic-Reinforced and Pile-Supported Embankment System (토목섬유보강 성토지지말뚝시스템에서의 하중전이 효과에 관한 모형실험)

  • Hong, Won-Pyo;Lee, Jae-Ho
    • Journal of the Korean Geosynthetics Society
    • /
    • v.9 no.3
    • /
    • pp.9-18
    • /
    • 2010
  • A series of model tests were performed to investigate the load transfer by soil arching in geosynthetic-reinforced and pile-supported(GRPS) embankment systems. In the model tests, model piles with isolated cap were inserted in the model container and geosynthetics was laid on the pile caps below sand fills. The settlement of soft ground was simulated by rubber form. The loads acting on pile caps and the tensile strain of geosynthetics were monitored by data logging system. At the given interval ratio of pile caps, the efficiency in GRPS embankment systems increased with increasing the height of embankment fills, then gradually converged at constant value. Also, at the given height of embankment fills, the efficiency decreased with increasing the pile spacing. The embankment loads transferred on pile cap by soil arching increased when the geosynthetics installed with piles. This illustrated that reinforcing with the geosynthetics have a good effect to restraint the movement of surrounding soft grounds. The load transfer in GRPS embankment systems was affected by the interval ratio, height of fills, properties of grounds and tensile stiffness and so on.

  • PDF

Studies of Interface Continuity in Isogeometric Structural Analysis for Multi-patch Shell Components (다중 패치 쉘 아이소 지오메트릭 해석의 계면 연속성 검토)

  • Ha, Youn Doh;Noh, Jungmin
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.31 no.2
    • /
    • pp.71-78
    • /
    • 2018
  • This paper presents the assembling of multiple patches based on the single patch isogeometric formulation for the shear deformable shell element given in the previous study. The geometrically exact shell formulation has been accomplished with the shell theory based formulation and the generalized curvilinear coordinate system directly derived from the given NURBS geometry. For the knot elements matching across adjacent surfaces, the zero-th and first parametric continuity conditions are considered and the corresponding coupling constraints are implemented by a master-slave formulation between adjacent patches. The constraints are then enforced by a substitution method for condensation of the slave variables, thereby reducing the model size. Through numerical investigations, the important features of the first parametric continuity condition are confirmed. The performance of the multi-patch shell models is also examined comparing the rate of convergence of response coefficients for the zero and first order continuity conditions and continuity in coupling boundary between two patches is confirmed.