• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.827-832
• /
• 2020

X-ray equipment, which is frequently used in radiology and treatment, is the most common and most used equipment in clinical practice. Equipment must provide accurate information to patients through continuous quality control. In case of manual quality control measurement, reproducibility may be poor and there may be a problem with reliability of evaluation results. In this study, an automated program was developed and attempted to measure how much the central ray between the focus of the X-ray tube and the variable aperture of the diagnostic X-ray generator used in clinical practice coincides. As a result of the experiment, it succeeded in calculating the coordinates of the two center points, and the distance between the two points was calculated in pixels and applied to the judgment and the automatic judgment value for whether the center line coincidence is within the normal angle or the abnormal angle is presented. The results of this study are considered to be very helpful in the quality control of the X-ray apparatus.

• Journal of Intelligence and Information Systems
• /
• v.5 no.2
• /
• pp.43-61
• /
• 1999

국방정보체계는 종류가 다양하고 대규모로 추진되기 때문에 소프트웨어 개발을 위한 사업관리에 어려움이 많이 따른다. 더구나, 현재 국방정보체계의 사업관리는 자동화시스템을 이용하여 체계적으로 실시하지 않고 수동으로 처리하기 때문에 많은 문제점이 야기되고 있고 현재의 소프트웨어 개발 표준인 ISO 12207을 수정 없이 그대로 대규모 실시간 국방정보체계의 소프트웨어 개발사업에 적용하는 것도 한계가 있다. 따라서 본 논문의 목적은 효율적인 국방정보체계 소프트웨어 개발 사업관리를 위해서 국방정보체계별로 적절한 개발 생명주기 모델을 선정하고, 각 단계별로 사업관리자가 수행할 태스크를 식별하는 등의 도메인 지식을 개발하여 궁극적으로 국방정보체계 사업관리용 전문가 시스템을 개발할 때 활용함과 동시에 국방정보체계 사업관리의 일환으로 최종 산출물에 대한 품질을 높일 수 있도록 체계적인 시험평가 방안에 대한 도메인 지식도 개발하여 사업관리용 전문가 시스템 구축 시에 활용하고자 하는 것이다. 이를 위해서 국방정보체계의 소프트웨어 개발 사업관리에 영향을 미치는 요소들을 식별하고 이를 이용하여 국방정보체계 소프트웨어 개발 사업관리를 위한 전문가 시스템을 구축할 수 있도록 생명주기 모델 선정을 위한 도메인 지식, 생명주기 각 단계별 세부활동을 위한 도메인 지식, 시험평가 방안선정을 위한 도메인 지식을 개발하여 제시하였다. 본 논문에서는 이러한 도메인 지식을 전문가 시스템 개발도구에서 지원되는 각종 에디터에 사용되는 형태나 IF A, THEN B 형태로 개발하지 않고 사업관리용 전문가 시스템의 지식베이스에 포함될 지식들을 식별하는 것을 중심으로 개발하였다. 즉, 본 논문에서는 국방정보체계 사업관리용 전문가 시스템 개발의 필요성과 가능성을 검증하는 용역연구과제로써 프로토타입 혹을 완벽한 사업관리용 전문가 시스템을 개발한 것이 아니며, 전문가 시스템 개발 시 가장 어렵고 중요한 지식베이스 모듈속에 포함될 도메인 지식을 개발하는 것이 이 연구의 목적이다. 이러한 연구는 궁극적으로는 이러한 도메인 지식이 국방정보체계의 사업관리를 위한 전문가 시스템의 지식베이스 모듈 구축 시 기초/기반 및 핵심 지식으로 활용될 수 있을 것이다.

• Journal of Korean Society of Archives and Records Management
• /
• v.14 no.4
• /
• pp.37-62
• /
• 2014

This study aims to discuss the paradigm shift of the right to know and to analyze the government 3.0 policies of the Park Gun-Hae's administration. The study analyzes the preceding researches on the rights to know and freedom of information. It also defines the concept of the right to know in both broad and narrow senses. Furthermore, the history of people's right to know is analyzed and divided into three different stages. Then, the outcomes and limitations of government 3.0 during Park Gun-Hae's administration are explored. As a result, the study discusses the dangers and the future tasks of government 3.0 in terms of quality, gathering, and security of public information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.157-158
• /
• 2021

Big data in the supply chain mainly comes from four aspects. One is the relevant data inevitably generated in the process of product value transfer of enterprises in the supply chain, such as production equipment quality data, planned procurement data, product data, etc; On the other hand, it is derived from the ERP data of various companies in the supply chain; The third is e-commerce data from the customer, and the last is data from external or manually entered data. A third-party data service center analysis and mining the data to predict and control the inventory in the process of supply chain operation. It brings innovation and change of management technology and way of thinking to the whole supply chain in many aspects, and finally achieves the goal of coordinated inventory and zero inventory of the whole supply chain.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.285-291
• /
• 2015

FTMS, TCS, ITS equipment such as high-pass highway are just a situation that does not lack traceability and passive surveillance is related to fault DB has so far consisted of an integrated operations management to maximize utilization of the facility. In addition, there is no replacement parts are replaced when a failure occurs, increasing the number of parts and repair time I have trouble growing, and becoming a service interruption whenever you replace each time. In this study, proactively manage the failure history of a highway facility ITS tries to preventive maintenance. Therefore, the error history is based on the reliability of the high-pass facilities theory to calculate the reliability of the system through a systematic statistical analysis Operational Availability. The fault number and the time the replacement period through the estimate decreases and can reduce the budget expenses by securing the spare parts quantity, establish a management plan in part by improving the quality of the system through constant preventive maintenance, quality of service at all times It may direct the non-stop operation state of the available state.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1155-1160
• /
• 2017

This paper describes a system implementation for the automatic inspection on the ventilating electronic device based on the reliability improvement. To be enhancement, the inspection error is minimized by the automatic inspection system on the ventilating apparatuses against the manual inspecting system. The system consists of the control system, software structure and monitoring system to be scanning the inspection processing. The inspection system for reliability improvement is evaluated in Gage Repeatability and Reproducibility. The experimental results are improved about 2 times inspecting speed, measured error ${\pm}0.02V$, effectiveness of discriminating performance 15%, missing probability 17% and false alarm probability 12% respectively in comparing with the manual inspection based on the wind pressure sensor. The system will be also improved more by making database and product bar codes for the total quality control system to the effective reliability enhancement in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2859-2865
• /
• 2011

The welded connection is known as an essential factor for establishing qualified construction and/or maintenance of wrapped steel pipe. In this study, welded connection conditions in the coated pipes with large diameter (over 700 mm) in Korea water distribution systems were estimated for suggesting technically and economically available welded connection method. For the study analysis, current steel pipe usage and accident cases were investigated. In addition, the characteristics of each welded connection method and automatic or manual connection techniques were also compared and estimated. As results, automatic welded connection method is superior than manual welded connection method in aspect of pure construction cost (average 9%) or pure welded connection cost (average 13.5%). When the poor welding-working situations in Korea are considered such as high tolerance of out-of-roundness in KS regulation, a number of lap joint welded connections, the real cost benefits of automatic welded connection should be much higher than those of manual welded connections.

• Journal of KIISE:Software and Applications
• /
• v.37 no.7
• /
• pp.503-517
• /
• 2010

Service-oriented computing, the effective paradigm for developing service applications by using reusable services, becomes popular. In service-oriented computing, service consumer has no responsibility for managing services, just invokes services what service providers are producing. On the other hand, service providers should manage any resources and data for service consumers can use the service anytime and anywhere. However, it is hard service providers manage the quality of the services because an unspecified number of service consumers. Therefore, service scalability for providing services with higher quality of services specified in a service level agreement becomes a potential problem in service-oriented computing. There have been many researches for scalability in network, database, and distributed computing area. But a research about a definition of service scalability and metrics of measuring service scalability is still not mature in service engineering area. In this paper, we construct a service network which connects multiple service nodes, and integrate all the resources to manage it. And we also present a service scalability framework for managing service scalability by using a mechanism of service migration or replication. In section 3, we, firstly, present the structure of the scalability management framework and basic functionalities. In section 4, we propose scalability enhancement mechanism which is needed to release functionality of the framework. In section 5, we design and implement the framework by using proposed mechanism. In section 6, we demonstrate the result of our case study which dynamically manages services in multi-nodes environment by applying our framework. Through the case study, we show the applicability of our scalability management framework and mechanism.

• Journal of KIISE:Software and Applications
• /
• v.30 no.3_4
• /
• pp.293-307
• /
• 2003

Object-oriented development has been generalized, but object-oriented project planning and scheduling techniques have not been studied enough. Furthermore, it is difficult to apply the conventional software management techniques to object-oriented projects. Especially, the large scaled projects are increasing, but the project planing techniques for these large scaled projects have not been proposed enough. In this paper, we propose systematic techniques for OO based project scheduling. We suggest a 7 step-process for deriving the OO project schedule from the use-case diagram which is describing the functional requirements of the system. The proposed process includes identifying use-cases, drawing preliminary chart through interdependency analysis, identifying characteristics of each use case, determining the number of iteration, assigning use-cases to iteration, considering available resource and constraints, drawing revised PERT chart. Each step has the explanation of the input, output, and the guidelines needed to perform the step. The project scheduling technique proposed in this paper ran be used effectively in the planning phase which the purpose is to plan a development schedule to yield the high quality software in minimum time.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.71-79
• /
• 2021

In the manufacturing industry, there is a transition to multi-item production for reinforcement of competitiveness. Therefore, the hybrid manufacturing technology is increasing. Especially, many efforts in production quality improvement are made through the adoption of the manufacturing execution system and ERP, so it is necessary to operate MES for prompt and effective management. MES should improve ineffective parts in production activities while managing all stages related to production of products. If there is change in the process, the changed items should be reflected to the system. However, most manufacturing execution systems are operated passively and repetitively by system administrators. This study presents a model that system administrators can comprehensively apply reference information about production related requirements on specific line's equipment to the same equipment of other lines. The flexible response for application to production lines is possible thanks to the division of blanket application and selective application of reference information through proposed model.