• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1996.11a
• /
• pp.26-33
• /
• 1996

광원에 대하여 서로 다른 여러개의 각도방향에서 광원을 바라볼 때 관측되는 광도분포 및 재귀반사성능을 측정하기 위해 광도분포 측정장치(배광측정기)를 제작하였다. 이 장치는 광원을 좌우로 360도, 상하로 $\pm$30도 회전시킬 수 있는 광원회전장치, 광검출기로 광전자중배관(PM Tube)을 쓰는 수광부 및 재귀반사성능 측정용 투광기와 제어 및 표시부로 구성되어 있다. 광도 측정범위는 0.01-199900 cd , 관측각범위은 0.2-1.5도 이고 광도의 측정오차는 $\pm$3% 이다. 제작된 장치의 구조와 성능평가결과가 제시되었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.151-154
• /
• 2008

The advanced technical data collected from home and abroad have properly been analyzed, so that they are useful to improve the photoelectric sensitivity tester. The results of this study have quickly been supplied to the related industry. Our research and development team has verified the response characteristics of the light-emitting and -receiving part of the photoelectric sensitivity tester in order to help the local manufacturer to study, develope and produce their photoelectric detectors.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.389-392
• /
• 2012

연기감지기는 이온전류의 변화량을 감지하는 이온화식 연기감지기와 발광부와 수광부로 이루어진 챔버내에 연기에 의한 광량의 변화를 감지하는 광전식 연기감지기로 구분된다. 국내에서는 광전식 연기감지기가 더 많이 사용되고 있는데 이러한 광전식 연기감지기의 챔버내에 이물질이 침입하게 되면 비화재보를 발생시키게 된다. 본 논문은 연기감지기의 연기감지 챔버에 대한 비화재보를 감소시키기 위한 신뢰성 시험에 대하여 논한 연구이다. 광전식 연기감지기의 신뢰성을 검증하는 방법으로는 먼지에 대한 신뢰성을 검증하는 가연물 종류에 따른 연기감지 신뢰성 시험이나 분진시험이 적합한 것으로 판단되며, 이러한 시험의 반복을 통하여 광전식 연기감지기의 신뢰성을 검증하는 것이 필요한 것으로 사료된다.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.44-52
• /
• 2017

This paper is based on a study of the response characteristics of photoelectric type smoke detector chambers according to dust color. Due to an amendment to the Fire Safety Codes to automatic fire alarm systems and visual alarm device, the installation of indoor smoke detectors has become mandatory, but in Korea there is still insufficient research on the non-operation or false alarms that could arise in indoor environments by indoor dust and other environmental conditions etc. In light of this, for this study, research was conducted on the indoor adaptability of smoke detector under various colors of fiber dust that were judged to occur most frequently in among the common indoor dust, photoelectric smoke detector with the lattice-type smoke detection chamber that the smoke detector which is most popular in the country was used, and four colors of fiber dust (brown, white, gray and black) were used the test dusts for carrying out dust and sensitivity testing. Also, the voltage of the photocell part of the smoke chamber was measured, and the scattering phenomenon in the chamber was observed. The result of the testing showed that all four dust types were suitable for dust and sensitivity testing under conditions of pollution A. Yet, there were occasions, at pollution B or C, where the brown, white and gray dust would cause fail alarm during operation testing. And black dust was confirmed to cause non-operation during operation testing. In the case of brown and white dust, the voltage measurement result of the photocell part of the smoke chamber confirmed that the voltage increases as the pollution level increases, and in the case of gray and black dust, the voltage decreases.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.265-268
• /
• 2011

In this paper, we designed and fabricated that fog alarm equipment detected to crew in maritime fog. Developed fog alarm equipment was combined sensor and a transmitter-receiver module using emitting device unit and receiver photoelectric element infrared LED using only the receive sensitivity was low, miniaturization. Experiment of the fabricated device had a standard that was humidity 70%, the fabricated one generating artificial-fog within visibility 1km. When humidity is over 70%, the fabricated one generates alarming sounds for a warning. When developed device apply to vessel will be able to respond quickly, according to dense fog in the accident.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1671-1673
• /
• 2003

Faraday효과를 기본으로 하는 광CT(Optical Current Transformer)는 기존의 CT의 결점을 개선하여 경제적 효과의 증대, 신호제어 시스템의 신속성향상, Digital 계전시스템의 호환성에 크게 기여한다는 점 등 많은 면에서 장점을 가지고 있다. 본 연구에서는 광섬유센서 기술을 응용하고, Faraday 효과의 편광면 회전량을 수광부에서 김출하여 대전류 측정을 위한 광 CT의 동작특성에 대한 실험을 하고자 한다. 실험에 사용찬 광원은 633[nm] He-Ne Laser와 1310[nm] Laser Diode 두 가지로 동일한 시스템으로 구성하여 비교한다. 센싱부의 광섬유는 길이 10[m]의 633[nm] 1310[nm]용 single-mode bare fiber를 전류가 흐르는 케이블에 감아 센싱부를 구성하고, 전류변화에 따른 두 출력값을 측정, 비교하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3389-3395
• /
• 2014

Conventional methods, such as the clock time control method and temperature difference control method, for defrost control often encounter mal-defrost and a waste of energy. Therefore, a more efficient method is needed to control defrosting precisely. A photoelectric sensor unit consisting of an emitter and a collector was installed in the front of outdoor heat exchanger. Accurate defrost control was performed by monitoring and using the change in output voltage according to the presence of frost. In this study, experiments were performed to determine if the performance and characteristic curves obtained using the clock time control method can be reproduced using a photoelectric sensor under the heating and defrosting capacity test condition described at KS C 9306. The output voltage of the phototransistor (receiver) and heating capacity, power consumption, and surface temperature of the outdoor heat exchanger, were compared. The results showed that photoelectric sensors can be used as a defrost control method. On-off control timing of the clock time defrosting method was in good agreement with those predicted by the output voltage of the photoelectric sensor.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.279-285
• /
• 2019

To estimate daily canopy photosynthesis, accurate estimation of canopy light interception according to a daily solar position is needed. However, this process needs a lot of cost, time, manpower, and difficulty when measuring manually. Various modeling approaches have been applied so far, but it was difficult to accurately estimate light interception by conventional methods. The objective of this study is to estimate the spatial distributions of light interception and photosynthetic rate of paprika with time by using 3D-scanned plant models and optical simulation. Structural models of greenhouse paprika were constructed with a portable 3D scanner. To investigate the change in canopy light interception by surrounding plants, the 3D paprika models were arranged at $1{\times}1$ and $9{\times}9$ isotropic forms with a distance of 60 cm between plants. The light interception was obtained by optical simulation, and the photosynthetic rate was calculated by a rectangular hyperbola model. The spatial distributions of canopy light interception of the 3D paprika model showed different patterns with solar altitude at 9:00, 12:00, and 15:00. The total canopy light interception decreased with an increase of surrounding plants like an arrangement of $9{\times}9$, and the decreasing rate was lowest at 12:00. The canopy photosynthetic rate showed a similar tendency with the canopy light interception, but its decreasing rate was lower than that of the light interception due to the saturation of photosynthetic rate of upper leaves of the plants. In this study, by using the 3D-scanned plant model and optical simulation, it was possible to analyze the light interception and photosynthesis of plant canopy under various conditions, and it can be an effective way to estimate accurate light interception and photosynthesis of plants.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.150-151
• /
• 2013

화재감지기는 연기감지기는 이온전류의 변화량을 감지하는 이온화식 연기감지기와 발광부와 수광부로 이루어진 챔버내에 연기에 의한 광량의 변화를 감지하는 광전식 연기감지기로 구분된다. 국내에서는 광전식 연기감지기가 더 많이 사용되고 있는데 이러한 광전식 연기감지기의 챔버내에 이물질이 침입하게 되면 비화재보를 발생시키게 된다. 본 논문은 연기감지기의 연기감지 챔버에 대한 비화재보를 감소시키기 위한 신뢰성 시험에 대하여 논한 연구이다. 본 연구에서는 광전식 연기감지기의 신뢰성을 검증하는 방법으로 UL 268 등에 규정되어 있는 먼지, 즉, 분진에 대한 신뢰성을 검증방법을 제시하였다. 먼지에 대한 신뢰성 검증을 보다 적절하게 하기 위하여 분진챔버로 분진을 반복적으로 폭로됨에 따른 감도성능 변화를 분석하는 방법이 필요할 것으로 사료된다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.174-182
• /
• 2015

In this paper, we developed the small size RGB sensor that recognizes a long distance using a low-cost color sensor. Light receiving portion of the sensor was used as a camera lens for far distance recognition, and illuminating unit was increased the strength of the light by using a high-power white LED and a lens mounted on the reflector. RGB color recognition algorithm consists of the learning process and the realtime recognition process. We obtain a normalized RGB color reference data in the learning process using the specimens painted with target colors, and classifies the three colors using the Mahalanobis distance in recognition process. We apply the developed the RGB color recognition sensor to a prototype of the part classification system and evaluate the performance of its.