• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.70-74
• /
• 2017

To research the electrical properties of ZnS thin films with various annealing conditions, ZnS was prepared by RF magnetron sputtering system and annealed in a vacuum for 10 minutes. All films were analyzed by the XRD, PL and I-V measurement system. The XRD pattern of ZnS film annealed at $100^{\circ}C$ was shifted to lower 2 theta because of the formation of a depletion region at the interface between a substrate and ZnS thin film, and the capacitance was abruptly increased. However, the pattern of XRD of ZnS film annealed at $100^{\circ}C$ with a Schottky contact was showed the amorphous structure, and the current-voltage characteristics were non-linearly observed by the Schottky contact.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.120-123
• /
• 2019

The effect of surface plasmon on ZTO thin films was investigated. The phenomenon of depletion occurring in the interface of the ZTO thin film created a potential barrier and the dielectric layer of the depletion formed a non-mass particle called plasmon. ZTO thin film represents n-type semiconductor features, and surface current by plasma has been able to obtain the effect of improving electrical efficiency as a result of high current at positive voltage and low current at negative voltage. It can be seen that the reduction of electric charge due to recombination of electronic hole pairs by heat treatment of compound semiconductors induces higher surface current in semiconductor devices.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.32-35
• /
• 2018

The current voltage characteristics of ZTO/SiOC were researched, and the conductivities of the ZTO films as a channel material were analyzed. The current of SiOC was abruptly decreased near 0V, and then the depletion layer was formed by the disappearance of charges in the region form -12V to +12V. SiOC with Schottky contacts near ${\sim}10^{-9}$ A had the cutoff effect of leakage currents. The conductivity of ZTOs prepared on SiOC was improved in the cutoff region of the leakage current of -12V

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1149-1154
• /
• 2014

To observe the tunneling phenomenon of oxide semiconductor transistor, The Indium-gallum-zinc-oxide thin film transistors deposited on SiOC as a gate insulator was prepared. The interface characteristics between a dielectric and channel were changed in according to the properties of SiOC dielectric materials. The transfer characteristics of a drain-source current ($I_{DS}$) and gate-source voltage ($V_{GS}$) showed the ambipolar or unipolar features according to the Schottky or Ohmic contacts. The ambipolar transfer characteristics was obtained at a transistor with Schottky contact in a range of ${\pm}1V$ bias voltage. However, the unipolar transfer characteristics was shown in a transistor with Ohmic contact by the electron trapping conduction. Moreover, it was improved the on/off switching in a ambipolar transistor by the tunneling phenomenon.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.193-194
• /
• 2018

Common transistor has unipolar characteristics in accordance with the doping carriers and operation by the threshold voltage, which is related to the stability. It is required the low threshold voltage of transistors to increase the stability of devices. The sensing ability is about the detection of how low current, therefore there is difference between the low current and leakage current. This study researched the ambipolar characteristics of transistors with very low currents to define the difference between common n-type transistors with unipolar properties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.664-669
• /
• 2018

To observe the relationship between the oxygen vacancy and electrical characteristics of $TiO_2$ due to the $CO_2$ gases, the $TiO_2$ were deposited by the mixing gases of $Ar:O_2=20$ sccm:20 sccm and annealed with various temperatures. The bonding structure was changed with the annealing temperature from amorphous to crystal structure, and the oxygen vacancy was also changed with these bonding structures. The $CO_2$ gas reaction of $TiO_2$ films showed the variation in accordance with the bonding structure. The capacitance increased at the amorphous structure $TiO_2$, and the current also increased. However the oxygen vacancy decreased at this amorphous structure $TiO_2$. Because of the formation of oxygen vacancies is in inverse proportion to the amorphous structure. Moreover, the diffusion current in the depletion layer such as the amorphous structure showed the difference in accordance with the $CO_2$ gas flow rates.