• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.127-140
• /
• 2009

COMS DATS C&M software is an integrated management system providing control and monitoring functionalities for COMS IDACS (Image Data Acquisition and Control System). DATS C&M S/W consists of a system management module, a control and monitoring module, a data management module, and a trend analysis module. COMS SOC is supposed to operate IDACS as a backup of MSC. Especially, for the backup operation, the control and monitoring module of DATS C&M S/W is designed to support the synchronization of the two IDACS systems. This paper describes design, implementation, and result of development of DATS C&M S/W.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.691-698
• /
• 2006

TCP/IP Offload Engine (TOE) is a technology that processes TCP/IP on a network adapter instead of a host CPU to reduce protocol processing overhead from the host CPU. There have been some approaches to implementing TOE: software TOE based on an embedded processor; hardware TOE based on ASIC implementation; and hybrid TOE in which software and hardware functions are combined. In this paper, we designed software modules and hardware modules for a hybrid TOE on an FPGA that had two processor cores. Software modules are based on the embedded Linux. Hardware modules are for data transmission (TX) and reception (RX). One core controls the TX path and the other controls the RX path of the Linux. This TX/RX path separation mechanism can reduce task switching overheads between processes and overcome poor performance of single embedded processor. Hardware modules deal with creating headers for outgoing packets, processing headers of incoming packets, and fetching or storing data from or to the host memory by DMA. These can make it possible to improve the performance of data transmission and reception. We proved performance of the TOE with separated transmission and reception paths by performing experiments with a TOE network adapter that was equipped with the FPGA having processor cores.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1301-1307
• /
• 2008

In this paper, we developed UHF RFID R/W system using AT91SAM7S256(ARM chip), UHF RFID R/W module (WJ7090) and wireless LAN(IEEE 802.11.a/b). And we developed a transmission/receiving packet which is send to UHF R/W module in AT91SAM7S256. In order to show the usefulness of UHF RFID R/W system, we executed a performance test. The developed UHF RFID R/W system shows better performance for reading of RFID tag and data transmission through wireless LAN.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.163-168
• /
• 2018

We developed W-band transceiver module using open MMIC chip such as receiver single chip and transmitting power amplifier. In order to calculate the noise figure and output power value, we analyzed the W-band transition loss from the antenna to MMIC connection and constructed the 12 channel receiver and the 5 channel transmitter. And compared with the results of the measurement. As a result, the output power of the transmitter was similar to the analytical results and the measured results at room temperature and environmental conditions. The noise figure of the receiver was also similar, but some channels showed error of about 3 dB due to manufacturing error.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.581-583
• /
• 1999

IEEE1394는 다양한 디지털 기기들이 고속의 시리얼 버스를 통해 데이터를 송수신할 수 있는 홈네트워킹 기술 표준이다. 현재 이 기술을 이용하여 인터넷과 연결하기 위한 표준화가 IETF에서 진행중이다. 본 논문에서는 리눅스 호스트에 장착된 IEEE1394 호스트 어댑터를 작동시킬 수 있는 디바이스 드라이버와 IETF에서 상정한 IPv4-over-1394 초안을 기초로 하여 이더넷과 IEEE1394를 연결하는 게이트웨이를 개발하였다. 본 논문에서는 IEEE1394용 리눅스 드라이버 모듈과 IPv4-over-1394를 구현한 커널 모듈의 구조를 설명하여 이더넷과 IEEE1394의 혼합 네트워크 환경에서 인터넷 응용 프로그램의 수행 실험으로 구현 모듈을 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.33-39
• /
• 2008

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.11a
• /
• pp.63-63
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.60-63
• /
• 2009

In this paper, Designed and implemented about module that generate division signal for uplink section and downlink section for controlling Tx/Rx antenna of 2.3-2.7GHz WiMAX TDD repeater. It is consisted of RF block and Baseband block, and because function of this module is that synchronize with WiMAX signal and create division signal for uplink section and downlink section, this module was designed only received path. And because of manufacturing of most RF block by one chip, this module could minimize area. And in baseband block, used the WiMAX Modem to detect Preamble and DL-MAP information of WiMAX signal. This design can process about 2.3-2.7GHz WiMAX.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.264-271
• /
• 2011

ILS(Instrument Landing System) is the international standard system for approach and landing guidance. ILS was adopted by ICAO(International Civil Aviation Organization) in 1947 and is currently being used in commercial systems. To design the digital transmitter and receiver modules that can be mounted in the integrated ILS, we propose the digital design methods of digital double AM modulator and demodulator using FPGA chip, DDS(Direct Digital Synthesizer) for generation of sampling clock, demodulator of DDC(Digital Down Converter) structure, and spectrum analyzer using DSP chip. We demonstrate the efficiency of the proposed design method through experiments using developed transmitter and receiver modules. This system can be used as a high-performance commercial system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.141-144
• /
• 2000

XML은 단순함과 융통성이라는 특징을 가지고 있기 때문에 Internet B2B(Business to Business) 메세지 송수신을 용이하게 한다. Internet B2B에서 메세지 송수신을 하는 데 있어서 보안이 점차 중요하게 대두되고 있다. 인터넷은 공용 네트워크이므로 도청과 위조와 같은 공격에 어떠한 보호장치도 있지 않기 때문에 메시지가 송수신되는 동안 자신의 중요한 정보가 다른곳으로 유출되거나 손실될 경우 B2B 메시지 송수신에 있어서 크나큰 손실을 가져올 수 있다. SSL(Secure Socket Layer)은 transport-level 보안 프로토콜이 제공하는 인증, 무결성, 기밀성을 제공하고 있다. 하지만 부인방지를 제공하고 있지 못하고 있는 실정이다. 하지만 XML-Signature를 이용하면 이러한 문제점을 해결할 수 있고 프로토콜 차원이 아닌 어플리케이션 차원에서 보안 시스템을 설계하므로 B2B 간 메시지 송수신하는데 있어서 서버와 클라이언트에 각각 XML-Signature 사용하여 안전하게 통신 할 수 있도록 해주는 보안모들 설계를 소개한다.