• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.8
• /
• pp.730-740
• /
• 2000

The software rejuvenation method for highly available multiplex systems uses a pro-active fault-tolerant approach to handle system failures. The software rejuvenation prevents failures from occurring, while the previous methods recover from failures after happening. Especially, since the software aging proceeds fast in the software used for the multimedia mobile computing due to the loss of communications or data, the preventive method from failures using software rejuvenation can be used for the multimedia mobile computing. In this paper, according to the operational parameters such as rejuvenation period, rejuvenation time, failure rate and repair rate of the servers, number of running servers, duration of running time, and type of running modes, we calculate steady-state probabilities, downtime, availability, and cost of the multiplex systems using software rejuvenation method. We validate the closed-form solutions of the mathematical model by experiments based on various operational parameters and find that the software rejuvenation method can be adopted as preventive fault-tolerant technique. The failure rate and unstable rate of the servers are essential factors for the decision making of the rejuvenation policies.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.579-586
• /
• 2017

In this study, new materials and shapes for a residential humidifying element were investigated. These elements could replace the current Japanese folded-type rayon/PE elements. Samples were taken from three different materials - rayon/PET (50:50), kraft/PET (40:60), kraft/PET/carbon. Results showed that the humidification efficiencies of the new samples were lower than those of the Japanese product. The efficiencies were 59% for the Japanese product (rayon/PET), 62% for kraft/PET and 84% for kraft/PET/carbon. This could be due to lower rayon or kraft content in the present samples than that in the Japanese product. However, pressure drops in the present samples were significantly lower than that in the Japanese product, due to improved channel configuration. The humidification capacity at the same pumping power ($j_m/f^{1/3}$) was 60% to 82% higher for the kraft/PET/carbon sample compared with the Japanese product. Furthermore, the results are compared with theoretical predictions.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.19-28
• /
• 2005

We establish a statistical model for the ultra-wide bandwidth (UMB) indoor channel based on over 2000 frequency response measurements campaign in a Practical apartment. The approach is based on the investigation of the statistical properties of the multipath profiles measured in different place with different rooms. Based on the experimental results, a characterization of the propagation channel from theoretic view point is described. Also we describe a method for measurement of the channel impulse response and channel transfer function. Using the measured data, the authors compares channel impulse responses obtained from time-domain and channel transfer functions obtained from frequency-domain with statistical path loss model. The bandwidth of the signal used in this experiment is from 10MHz to 8.01 GHz. The time-domain results such as maximum excess delay, men excess delay and ms delay spread are presented. As well as, omni-directional biconical antenna were used for transmitter and receiver In addition, measurements presented here support m channel model including the antenna characteristics.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.387-402
• /
• 2014

In congested urban areas, constructions of tunnel structures have became necessary due to a lack of surface space. The excavation of any tunnel generated the ground disturbances of surrounding ground and displacements is major concern. Therefore, a study of tunnel stability is necessary. In this study, the authors have investigated the stability and failure pattern of tunnel through the model tunnel test. In this study, the close range photogrammetry was used to measure the ground deformation. The measured data was converted to displacement vectors and contours. And then it compared to FE analysis and empirical formula. In addition, this study presented the comparison between steel pipe reinforced model tunnel and unreinforced model tunnel. The ground deformation for both the steel pipe reinforced model tunnel and the unreinforced model tunnel was analysed.

• Particle and aerosol research
• /
• v.13 no.2
• /
• pp.79-85
• /
• 2017

This study identified the loss of minimum fluidization velocity and pressure in accordance with the superficial velocity of $NiO/MoO_3/MoS_2$, a rare metallic oxide and high value-added material in the lab-scale fluidized bed reactor (L=0.25 m, D=0.05 m). The average pressure loss in L/D 1, 2, and 3 of $NiO/MoO_3/MoS_2$ within the scope of superficial gas velocity between 0.07 and 0.45 m/s based on the L/D 1, 2, and 3 of the specimen was shown to be 290~1952 Pa at decreasing flux and 253~1925 Pa at increasing flux. The comparison between the theoretical value proposed by Wen and the test data showed a difference between 0.021~0.36 magnification. Based on these results, this study was able to determine the operation conditions where rare metallic oxides could be applied in real phenomena.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.754-760
• /
• 2006

This study was conducted to examine the quality characteristics of canned kimchi prepared by minimal thermal processing. Korean cabbage kimchi was fermented at $20^{\circ}C$ for several days up to acidity $0.5{\pm}0.1%$, was packaged in cylindrical can of 115 mL and pasteurized at low temperature. Thermal processing times based on $F_{60}$ value at geometrical center of the can were determined as 23.1, 17.7 and 12.7 min at 65, 70 and $80^{\circ}C$, respectively. The quality changes of the processed kimchi were measured during storage at $20^{\circ}C$. The pH of pasteurized kimchi was higher than that of unpasteurized control. The number of lactic acid bacteria was reduced to about $10^{2}{\sim}10^{3}$ (CFU/mL). The pasteurized kimchi product showed better texture and color values compared to the control, while resulting in the lower carotenoid and ascorbic acid contents. Kimchi preparation by minimal thermal processing had a positive effect for reduction of sour taste and sour flavor in sensory quality, but gave adverse effect in acceptability because of off-taste and off-flavor.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.975-983
• /
• 1999

최근 네트워크의 속도가 빨라지고 멀티미디어 데이터를 다루기 위한 기술들이 개발됨에 따라 많은 멀티미디어 응용 프로그램들이 인터넷에 등장하고 있다. 그러나 이들 응용프로그램들은 수신자에게 전송되는 영상.음성의 품질이 낮기 때문에 기대만큼 빠르게 확산되지 못하고 있다. 영상.음성의 품질이 낮은 이유는 현재 인터넷이 실시간 응용프로그램이 요구하는 만큼 빠르고 신뢰성 있게 데이터를 전송할 수 없기 때문이다. 현재 인터넷의 내부구조를 바꾸지 않고 품질을 높이기 위해 많은 연구들이 진행되고 있는데 그 중 하나는 동적으로 변화하는 인터넷의 상태에 맞게 멀티캐스트 트래픽의 전송율을 조절하는 종단간의 흐름제어이다. 본 논문은 기존의 흐름제어 기법인 IVS와 RLM의 성능을 개선시키기 위한 두 가지 흐름제어 기법을 소개한다. IVS는 송신자가 주기적으로 측정된 네트워크 상태에 따라 전송율을 일정하게 조절한다. 송신자가 하나의 데이타 스트림을 생성하는 IVS와는 달리 RLM에서는 송신자가 계층적 코딩에 의하여 생성된 여러개의 데이타 스트림을 전송하고 각 수신자는 자신의 네트워크 상태에 맞게 데이타 스트림을 선택하는 기법이다. 그러나 IVS는 송신자가 전송율을 일정하게 증가시키고, RLM은 각자의 네트워크 상태를 고려하지 않고 임의의 시간에 하나 이상의 데이타 스트림을 받기 때문에 성능을 저하시킬 수 있다. 본 논문에서는 TCP-like IVS와 Adaptive RLM이라는 두 가지 새로운 기법을 소개한다. TCP-like IVS는 송신자가 전송율을 동적으로 결정하고, Adaptive RLM은 하나 이상의 데이타 스트림을 받기 위해 적당한 시간을 선택할 수 있다. 본 논문에서는 시뮬레이션을 통해 여러 가지 네트워크 구조에서 두 가지 방식이 기존의 방식에 비하여 더욱 높은 대역폭 이용율과 10~20% 정도 적은 패킷손실율을 이룬다는 것을 보여준다.Abstract Nowadays, many multimedia applications for the Internet are introduced as the network gets faster and many techniques manipulating multimedia data are developed. These multimedia applications, however, do not spread widely and are not fast as expected at their introduction time due to the poor quality of image and voice delivered at receivers. The poor quality is mainly attributed to that the current Internet can not carry data as fast and reliably as the real-time applications require. To improve the quality without modifying the internal structure of the current Internet, many researches are conducted. One of them is an end-to-end flow control of multicast traffic adapting the sending rate to the dynamically varying Internet state. This paper proposes two flow-control techniques which can improve the performance of the two conventional techniques; IVS and RLM. IVS statically adjusts the sending rate based on the network state periodically estimated. Differently from IVS in which a sender produces one single data stream, in RLM a sender transmits several data streams generated by the layered coding scheme and each receiver selects some data streams based on its own network state. The more data streams a receiver receives, the better quality of image or voice the receiver can produce. The two techniques, however, can degrade the performance since IVS increases its sending rate statically and RLM accepts one more data stream at arbitrary time regardless of the network state respectively. We introduce two new techniques called TCP-like IVS and Adaptive RLM; TCP-like IVS can determine the sending rate dynamically and Adaptive RLM can select the right time to add one more data stream. Our simulation experiments show that two techniques can achieve better utilization and less packet loss by 10-20% over various network topologies.

• Knowledge Management Research
• /
• v.22 no.2
• /
• pp.119-144
• /
• 2021

Recently, as competition in the market evolves from the competition among companies to the competition among their supply chains, companies are struggling to enhance their supply chain management (hereinafter SCM). In particular, as blockchain technology with various technical advantages is combined with SCM, a lot of domestic manufacturing and distribution companies are considering the adoption of blockchain-oriented SCM (BOSCM) services today. Thus, it is an important academic topic to examine the factors affecting the use of blockchain-oriented SCM. However, most prior studies on blockchain and SCMs have designed their research models based on Technology Acceptance Model (TAM) or the Unified Theory of Acceptance and Use of Technology (UTAUT), which are suitable for explaining individual's acceptance of information technology rather than companies'. Under this background, this study presents a novel model of blockchain-oriented SCM acceptance model based on the Technology-Organization-Environment (TOE) framework to consider companies as the unit of analysis. In addition, Value-based Adoption Model (VAM) is applied to the research model in order to consider the benefits and the sacrifices caused by a new information system comprehensively. To validate the proposed research model, a survey of 126 companies were collected. Among them, by applying PLS-SEM (Partial Least Squares Structural Equation Modeling) with data of 122 companies, the research model was verified. As a result, 'business innovation', 'tracking and tracing', 'security enhancement' and 'cost' from technology viewpoint are found to significantly affect 'perceived value', which in turn affects 'intention to use blockchain-oriented SCM'. Also, 'organization readiness' is found to affect 'intention to use' with statistical significance. However, it is found that 'complexity' and 'regulation environment' have little impact on 'perceived value' and 'intention to use', respectively. It is expected that the findings of this study contribute to preparing practical and policy alternatives for facilitating blockchain-oriented SCM adoption in Korean firms.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.3
• /
• pp.493-504
• /
• 2017

We often observe count data that exhibit over-dispersion, originating from too many zeros, and under-dispersion, originating from too few zeros. To handle this types of problems, the zero-altered distribution model is designed by Ghosh and Kim in 2007. Their model can control both over-dispersion and under-dispersion with a single parameter, which had been impossible ever. The dispersion type depends on the sign of the parameter ${\delta}$ in zero-altered distribution. In this study, we demonstrate the role of the dispersion type parameter ${\delta}$ through the data of the number of births in Korea. Employing both the chi-square statistic and the Kolmogorov statistic for goodness-of-fit, we also explained any difference between the theoretical distribution and the observed one that exhibits either over-dispersion or under-dispersion. Finally this study shows whether the test statistics for goodness-of-fit show any similarity with the role of the dispersion type parameter ${\delta}$ or not.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.1
• /
• pp.1-17
• /
• 2020

Three-dimensional microscopic approaches in histopathology display multiplex properties that present puzzling questions for specimens as related to their comprehensive volumetric information. This information includes spatial distribution of molecules, three-dimensional co-localization, structural formation and whole data set that cannot be determined by two-dimensional section slides due to the inevitable loss of spatial information. Advancement of optical instruments such as two-photon microscopy and high performance objectives with motorized correction collars have narrowed the gap between optical theories and the actual reality of deep tissue imaging. However, the benefits gained by a prolonged working distance, two-photon laser and optimized beam alignment are inevitably diminished because of the light scattering phenomenon that is deeply related to the refractive index mismatch between each cellular component and the surrounding medium. From the first approaches with simple crude refractive index matching techniques to the recent cutting-edge integrated tissue clearing methods, an achievement of transparency without morphological denaturation and eradication of natural and fixation-induced nonspecific autofluorescence out of real signal are key factors to determine the perfection of tissue clearing and the immunofluorescent staining for high contrast images. When performing integrated laboratory workflow of tissue for processing frozen and formalin-fixed tissues, clear lipid-exchanged acrylamide-hybridized rigid imaging/immunostaining/in situ hybridization-compatible tissue hydrogel (CLARITY), an equipment-based tissue clearing method, is compatible with routine procedures in a histopathology laboratory.