Flow behavior characteristics according to superficial gas velocity of NiO/MoO3/MoS2
![]() |
Lee, Jae-Rang
(Climate Change Research Division, Korea Institute of Energy Research)
Hasolli, Naim (Climate Change Research Division, Korea Institute of Energy Research) Jeon, Seong-Min (Climate Change Research Division, Korea Institute of Energy Research) Lee, Kang-San (Climate Change Research Division, Korea Institute of Energy Research) Lee, Kwan-Young (Department of Chemical and Biological Engineering, Korea University) Kim, Kwang-Deuk (Climate Change Research Division, Korea Institute of Energy Research) Park, Young-Ok (Climate Change Research Division, Korea Institute of Energy Research) |
1 | Yagi, Sakae, and Daizo Kunii. "Fluidized-solids reactors with continuous solids feed-I: Residence time of particles in fluidized beds." Chemical Engineering Science 16.3-4 (1961): 364-371. DOI |
2 | Song, Lianying, Tao Zhou, and Jingsi Yang. "Fluidization behavior of nano-particles by adding coarse particles." Advanced Powder Technology 20.4 (2009): 366-370. DOI |
3 | Geldart, Derek. "Types of gas fluidization." Powder technology 7.5 (1973): 285-292. DOI |
4 | Garncarek, Zbigniew, et al. "A quantitative assessment of the effect of distributor type on particle circulation." Powder technology 91.3 (1997): 209-216. DOI |
5 | Gauthier, D., S. Zerguerras, and G. Flamant. "Influence of the particle size distribution of powders on the velocities of minimum and complete fluidization." Chemical Engineering Journal 74.3 (1999): 181-196. DOI |
6 | Evans, J. W., S. Song, and C. E. Leon-Sucre. "The kinetics of nickel oxide reduction by hydrogen; measurements in a fluidized bed and in a gravimetric apparatus." Metallurgical and Materials Transactions B 7.1 (1976): 55-65. |
7 | Kunii, Daizo, and Octave Levenspiel. Fluidization engineering. Elsevier, 2013. |
8 | Gauthier, D., S. Zerguerras, and G. Flamant. "Influence of the particle size distribution of powders on the velocities of minimum and complete fluidization." Chemical Engineering Journal 74.3 (1999): 181-196. DOI |
9 | Ching, Yang Wen. "Handbook of fluidization and fluid-particle systems." (2003). |
10 | Molerus, O. "Interpretation of Geldart's type A, B, C and D powders by taking into account interparticle cohesion forces." Powder technology 33.1 (1982): 81-87. DOI |
11 |
Mentus, Slavko, et al. "Gel-combustion synthesis of NiO- |
12 |
Saghafi, M., et al. "Synthesis of nanocrystalline molybdenum by hydrogen reduction of mechanically activated |
13 | Rhodes, M. J. (2008). Introduction to particle technology. John Wiley & Sons. |
14 | Garncarek, Zbigniew, et al. "A quantitative assessment of the effect of distributor type on particle circulation." Powder technology 91.3 (1997): 209-216. DOI |
15 | Sobrino, Celia, Naoko Ellis, and Mercedes de Vega. "Distributor effects near the bottom region of turbulent fluidized beds." Powder Technology 189.1 (2009): 25-33. DOI |
16 | Morooka, Shigeharu, et al. "Fluidization state of ultrafine powders." Journal of Chemical Engineering of Japan 21.1 (1988): 41-46. DOI |
17 | Menon, Narayanan, and Douglas J. Durian. "Particle motions in a gas-fluidized bed of sand." Physical Review Letters 79.18 (1997): 3407. DOI |
18 | Gauthier, D., S. Zerguerras, and G. Flamant. "Influence of the particle size distribution of powders on the velocities of minimum and complete fluidization." Chemical Engineering Journal 74.3 (1999): 181-196. DOI |
19 | Wu, S. Y., and J. Baeyens. "Effect of operating temperature on minimum fluidization velocity." Powder technology 67.2 (1991): 217-220. DOI |
![]() |