• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.1
• /
• pp.34-38
• /
• 2005

Effects of pH level and slurry particle size on material removal rate and planarization of langasite single crystal wafer have been examined. Higher material removal rate was obtained with lower pH level slurries while the planarization was found to be determined by average particle size of colloidal silica slurries. Slurries containing 0.045 ㎛ amorphous silica particles showed the best polishing effect without any scratches on the surface. Effective particle number has a strong effect on the surface planarization and the removal rate, so that the lower effective particle numbers produced low removal rate but the better planarization results.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.538-544
• /
• 1996

A highly viscous biopolymer from alkali-tolerant Bacillus sp. was purified and its rheological properties were studied. 1% (w/v) solution of purified biopolymer showed pseudoplastic fluid behavior with the yield stress similar to those of xanthan and guar gum, and its consistency index was exponentially dependent on concentration and temperature. The concentration dependency of consistency index exhibited two rectilinear plots with different slopes at 1% concentration and pseudoplastic property increased with the increase of biopolymer concentration. The biopolymer solution exhibited a low temperature dependency and the activation energy of flow was 1.16 kacl/g mol. The apparent viscosity was very dependent on the change of pH and the addition of salt. However, no organic solvent effects were observed effects of viscosity synergism with the addition of viscosifier were not observed.

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.26-33
• /
• 1984

The rate constants for the following vibration-to-vibration energy exchange reactions have been calculated theoretically for the temperature range from 300 to 800K and for n = 2 to 5. HF(v=n) + DF(v=0) ${\to}$ HF(v=n-l) + DF(v=l) + ${\Delta}E$(a) DF(v=n) + HF(v=0) ${\to}$ DF(v=n-l) + HF(v=l) + ${\Delta}E$(b) In calculation the loosely-held, non-rigid dimer collision model and semiclassical method have been employed. The results show that the rate constants for the processes (a) are much greater than those for the processes (b). Also, it is found that the rate constants for the processes (a) increase with decreasing temperature and with increasing quantum number, while those for the processes (b) show the opposite tendencies. These findings are explained in terms of the sign and magnitude of the energy mismatch, ${\Delta}E$.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.174-179
• /
• 1992

Reaction of aniline and iodine in$CHCl_3,\;CH_2Cl_2 : CHCl_3$(1 : 1), and $CH_2Cl_2$ has been studied kinetically by using conductivity method, Pseudo first-order rate constants ($k_{obs}$) and second-order rate constants ($k_{obs}$/[aniline]) are dependent on the aniline concentration. Second-order rate constants obtained were increased with increasing aniline concentration. We analysed these results on the basis of formation of charge transfer complex as reaction intermediate. From the construction of react ion scheme and derivation of rate equation, we calculated equilibrium constants and activation parameters for the formation and transformation of charge transfer complex. The equilibrium constants were decreased by an increase in the dielectric constant of the solvent and the value is 1.7-3.7$M^{-1}$. The rate of transformation are markedly affected by the solvent polarity. ${\Delta}H^{\neq}$ is about 14.2kJ/mol, and ${\Delta}S^{\neq}$ is large negative value of -243J/mol K.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.77-86
• /
• 1997

The advanced development in many fields of engineering and science has caused much interests and demands for crashworthiness and non-linear dynamic transient analysis of structure response. Crash and impact problems have a dominant characteristic of large deformation with material plasticity for short time scales. The structural material shows strain rate-dependent behaviors in those cases. Conventional rate-independent constitutive equations used in the general purposed finite analysis programs are inadequate for dynamic finite strain problems. In this paper, a rate-dependent constitutive equation for elastic-plastic material is developed. The plastic stretch rate is modeled based on slip model with dislocation velocity and its density so that there is neither yielding condition, nor loading conditions. Non-linear hardening rule is also introduced for finite strain. Material constants of present constitutive equation are determined by experimental data of mild steel, and the constitutive equation is applied to uniaxile tension loading.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.307-309
• /
• 2000

진화 알고리즘은 현재까지 다양한 최적화 문제들에 사용되어 왔고, 또한 이러한 최적화 문제들은 효율적으로 해결하기 위하여 많은 진화 알고리즘이 개발되어 왔다. 그러나 이러한 진화 알고리즘들의 공통적인 문제점은 탐색공간의 확대에 대하여 전반적으로 탐색시간이 오래 걸린다는 것이다. 실제로 최적화 해야 할 변수의 증가에 따라 탐색 차원이 증가하므로 탐색 시간도 기하급수적으로 늘어난다. 따라서 최근의 진화 알고리즘에 대한 연구는 탐색공간의 축소나, 진화 속도의 향상에 초점이 맞추어져 있었고, 이러한 경향에 따라 많은 연구성과가 있었다. Potter와 Dejong의 협력 공진화와, Weicker의 적응적 공진화가 바로 그것이다. 그러나 이 방법들도 최적화 해야 할 변수들이 서로 강한 의존성을 가지고 있는 경우나, 대부분의 변수가 서로 의존성을 가지고 있는 경우에는 그다지 좋은 결과를 보이지 못하는 문제점을 가지고 있다. 본 논문에서는 이러한 연구들을 기반으로 하여 각 방법의 단점들을 보완함으로써 효율을 향상시킨 새로운 진화 알고리즘을 제안한다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.587-592
• /
• 2021

Change in the cortical thickness of long bones occurring with aging and osteoporosis is known to be a risk factor for fracture. The present study aims to investigate the dependencies of phase velocities of ultrasonic guided waves on the cortical thickness in 7 soft tissue-bone mimicking phantoms consisting of acrylic plates covered by a 2 mm-thick silicone rubber layer by using the axial transmission technique with a pair of transducers with a center frequency of 200 kHz and a diameter of 12.7 mm. Two distinct propagating waves with different velocities, the First Arriving Signal (FAS) and the Slow Guided Waved (SGW), were consistently observed for all the soft tissue-bone mimicking phantoms. The FAS velocity decreased slightly with increasing thickness, whereas the SGW velocity increased strongly with increasing thickness. The FAS and the SGW velocities were found to be closely consistent with the S0 and the A0 Lamb mode velocities for a free acrylic plate, respectively, suggesting that the presence of the soft tissue mimicking material (2 mm-thick silicone rubber layer) covering the acrylic plates does not influence significantly the velocity measurements.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.247-248
• /
• 2001

부착성 규조류는 전복의 인공종묘생산시 초기유생의 먹이로 널리 사용되고 있다. 현재 전복 종묘생산은 각장이 7∼8 mm가 될 때까지 투명 플라스틱 파판에 부착하는 미세조류를 자연발생시켜 먹이로 사용하는 방법에 의존하고 있다 (Hahn, 1989). 전복유생은 파판에 부착하여 먹이를 먹기 시작하는 시기부터 각장이 약 3 mm가 되는 시기까지 부착성 규조류를 먹이로 성장하는데 자연발생적 부착규조는 성장함에 따라 체인을 형성하면서 고밀도로 부착시 탈락과 동시에 치패가 탈락되고, 전복치패의 성장속도에 비해 파판에 부착된 규조류의 성장속도가 느려 먹이부족 현상으로 인한 생존율이 감소되는 문제점을 가지고 있다. (중략)

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.10a
• /
• pp.205-206
• /
• 2000

흔히 '광어'라고 일컫는 넙치는 우리나라의 해산어류 중 가장 경제성이 높은 어류중의 하나이다. 우리나라의 넙치생산은 초기에는 주로 자연산의 어획에 의존하였으나 최근에는 양식기술의 발달로 생산의 대부분이 육상 양식에 의해 이루어지고 있다. 특히 인공종묘생산이 가능하고 먹이효율이 높아 성장속도가 빠르며 소비수요마저 커서 각광받는 산업으로 그 보급이 전국적으로 확대되고 있다. (중략)

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.185-192
• /
• 2006

Cares should be taken when performing the P and S wave velocity loggings in engineering and environmental fields. Some of them are the effect of casing, which is installed to prevent the borehole collapsing when the drilling is done on the loose ground such as soil and/or soft rock, and the discrepancy of the velocities of the same media according to the difference of the source wave frequency spectrum. The elastic moduli obtained from the P and S wave velocity logging have the dynamic characteristics. To overcome these difficulties, the following suggestions are recommended; (1) develop and apply a careful drilling technique that can keep the borehole wall without a casing, and (2) apply the logging methods with the suitable frequency bandwidth for the object of the velocity logging. It is important to make the aseismological engineers understand the difference between the dynamic elastic moduli and the static ones obtained from mechanical test, and to advise them to use the information properly.