• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1034-1041
• /
• 2012

In this paper, a compact circularly polarized metamaterial patch antenna using the -1 mode that is induced by the composit right-left handed(CRLH) transmission line is proposed. Basically, since the -1 mode is the same properties with the +1 mode of the conventional patch antenna, the circular polarization(CP) is realized. If two orthogonal -1 modes are excited with $90^{\circ}$ phase difference, the CP property can be obtained. In order to obtain two orthogonal modes and $90^{\circ}$ phase difference, 4 mushroom structures having the shape of triangle are employed and the inter-digital gaps are optimized, respectively. The fabricated antenna is based on RT/duroid5880 substrate and the total area of the 4 mushrooms is $0.161{\lambda}_0{\times}0.161{\lambda}_0$. It is confirmed that the center frequency of the proposed antenna is measured as 2.845 GHz and it operates from 2.830 GHz to 2.850 GHz. In addition, the antenna maintains the CP property from 2.842 GHz to 2.847 GHz at the peak gain and the measured radiation efficiency is 46 %.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1456-1464
• /
• 2007

The research of skin-tone detection has been conducting continuously to enlarge the importance in security, surveillance and administration of the information and 'Password Control System' for using face and skin recognition in airports, harbors and general companies. As well as tile rapid diffusion of the application range in image communications and an electron transaction using wide range of communication network, the importance of the accurate detection of skin color has been augmenting recently. In this paper, it will set up the boundaries of skin colors using the information of Cb and Cr in YCbCr color model of human skin color which is from hundreds compiled portrait images for each race, and suggest a efficient yet simple structure about the skin detection which has been followed by whether the comprehension of the boundaries of skin or not with adaptive skin-range set. With the possibility of the 1D Processes which does not use any memory, it is able to be applied to relatively small-sized hardware and system such as mobile apparatuses. To add the selective mode, it is not only available the improvement of tie skin detection, but also showing the correspondent results about previous face recognition technologies using complicated algorithm.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2011

Effect of daminozide concentration and application methods, in combination with different planting period, on the growth of chrysanthemum was investigated for small pot-plant production. Daminozide, a plant growth regulator widely used for plant height control, was applied by drench or sub-application. For pot chrysanthemums of first planting time, plant height was reduced over $4,000mg{\cdot}L^{-1}$, when daminozide was drenched directly into the pot medium. However, $5,000mg{\cdot}L^{-1}$ of daminozide drench affected plant height reduction for secondarily planted pot chrysanthemum. Analysis of variance revealed the plant height was affected by planting time. For sub-application experiment of daminozide, it showed that the daminozide affected the number of flower buds formation and fresh and dry weight. These results suggest that planting period affected growth retardation of chrysanthemum. Therefore, application of growth retardant in combination with planting time and application methods may provide more efficient growth control for pot-chrysanthemum production.

• Journal of the Korean Society of Child Welfare
• /
• no.59
• /
• pp.183-208
• /
• 2017

The purpose of this study was to identify groups depending on the change trajectory of child maltreatment in childhood and early adolescence. For this study, the data from waves two through six (2011-2015) of the Korean Children and Youth Panel Survey (KCYPS) were used. Participants included first-grade (n=2,300) and fourth-grade (n=2,325) elementary school students. A latent class growth model (LCGM) using Mplus 7.21 was adopted to classify the types of developmental trajectories of child maltreatment. The main results were as follows: First, in physical abuse, childhood from the second to the sixth grades was classified into four groups: decreased, low maintenance, increased, and no maltreatment type. In addition, early adolescence from the fifth grade of elementary school to the third grade of middle school was also classified into the same types. Second, in emotional abuse, childhood was classified into three groups: decreased, increased, and no maltreatment type. Early adolescence was classified into four groups: decreased, low maintenance, increased, and no maltreatment type. Third, in neglect, childhood was classified into four groups: maintenance, low decreasing, low increasing, and no maltreatment type. Early adolescence was classified into three groups: maintenance, low increasing, and no maltreatment type. According to the change of child maltreatment by developmental period, physical abuse continued from childhood to early adolescence, whereas emotional abuse and neglect increased in early adolescence compared to childhood. This study is meaningful in classifying latent classes depending on maltreatment types. Theoretical and practical implications were suggested based on the study results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.224-226
• /
• 2016

With the technical development and rapid increase of private demand, the new market for unmanned vehicle combined with the characteristics of 'unmanned automation' and 'vehicle' is rapidly growing. Even though the pilot driving is currently allowed in some countries, there is no country that has institutionalized the formal driving of self-driving cars. In case of the existing vehicles, safety incidents are frequently happening due to the frequent malfunction of the rear sensor, blind spot of the rear camera, or drivers' carelessness. Once such minor flaws are complemented, the relevant regulations for the commercialization of self-driving car and small drone could be relieved. Contrary to the ultrasonic and laser sensors used for the existing vehicles, this paper aims to attempt the distance measurement by using the depth sensor. A depth camera calculates the distance data based on the TOF method calculating the time difference by lighting laser or infrared light onto an object or area and then receiving the beam coming back. As this camera can obtain the depth data in the pixel unit of CCD camera, it can be used for collecting depth data in real-time. This paper suggests to solve problems mentioned above by using depth data in real-time and also to design the obstacle avoidance system through distance measurement.

• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.37-44
• /
• 2020

Medical waste is any kind of waste that contains infectious material and recommended not to be transferred for infection control. As a means of disposal, incineration has better points than dumping or landfill in the quantity reduction, odorless and nonhazardous. However, open burning and incineration of health care wastes under bad circumstances, can result in the emission of environmental pollutants to air. A burial of biological waste brings pollution of soil and water. Most of sub divisional hospitals in Fiji transfer their medical wastes to divisional hospitals for incineration. In 2011, 62,518 kg of medical waste was incinerated in the three divisional hospitals. However, some medical wastes are considered as general waste and burnt or sent to landfill site, some are buried on site in some sub-divisional hospitals. In this regards, urgent education is necessary for awareness promotion to relevant personnel in medical waste treatment. On site incineration using small scale incinerator is more recommended than transportation of medical wastes treatment in Fiji. Moreover, remotely controllable and fixable small scale of incinerator is more desirable in sub-divisional hospitals. It is recommended that Fiji government to set up a legal framework for medical waste management (MWM), to develop specific guidelines for MWM, to set up a training system for MWM to ensure that all relevant personnel are trained, to develop a monitoring and supervision system for MWM, to clarify the future financing of MWM activities, and to improve the MWM infrastructure.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.281-286
• /
• 1988

These studies were conducted to find out the polishing methods that improve yield and quality of the polished barley. Four varieties of hulled barley, Dongbori 1. Bunong, Kangbori and Suwon 182 which were produced in Suwon, Korea in 1979, were subjected to this experiment. The polishing machine, manufactured by Satake Co, was used as test mill. Increasing the roller speed of polishing machine causes more polished barley in a unit period. The speed influenced more in length than thickness or width of grain. Therefore the shape of grain became bold type as the speed increased. The optimum roller speed was 1,300rpm in ideal shape of polished barley. The lowest hardness was observed in the husk layer and the hardness was found in the decreasing order of the aleurone, testa, peri carp and the endosperm layer. The thickness of bran layer, weight of 1,000 kernel and hardness of polished barley were greatly different according to barley varieties. Also the length, thickness, width and the ratio of length to width of barley grain were significantly different in barley varieties. The ratio of length to width of the polished barley was 1.59 in Suwon 182, 1.53 in Bunong, 1.51 in Kangbori and 1.26 in Dongbori 1.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.171-180
• /
• 2023

Hydrogen energy technology is gaining importance in the era of the Fourth Industrial Revolution, offering military advantages when applied to military vehicles due to its characteristics such as reduced greenhouse gas emissions, noise, and low vibration. Korea's military has initiated the Army Tiger 4.0 plan, focusing on hydrogen application, downsizing, and AI-based smart features. The Ministry of National Defense plans to collaborate with the Ministry of Environment to expand hydrogen charging stations nationwide, anticipating increased deployment of military hydrogen vehicles. However, considering the Jet Fire and VCE(Vapor Cloud Explosion) nature of hydrogen, ensuring safety during installation is crucial. Current military guidelines specify a minimum safety distance of 2m from adjacent buildings for charging stations. Scientific methods have been employed to quantitatively assess the accident damage range of hydrogen, proposing a minimum safety distance beyond the affected area.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.583-592
• /
• 2014

This study was carried out to investigate the operational time and productivity of logging operation by chain saw, yarder attached on tractor, tower-yarder, mini-truck, mini-forwarder, and chipping operations by mini-chipper, large-chipper in order to develop the efficient logging operation system for utilization of forest-biomass. As a result, the average felling and bucking time using chain saw at the site 1 and 2 was observed to be 182.7 sec/cycle and 518.5 sec/cycle respectively. The average yarding time was 202.5 sec/cycle using yarder attached on tractor and 295.1 sec/cycle using tower-yarder. The average forwarding time was 2,073 sec/cycle using mini-truck and 2,248.4 sec/cycle using mini-forwarder. The operational time of felling and bucking using chain-saw can be delayed according to the direction of fallen trees. The selection of felling direction is very important to yarding operation because the direction between width-yarding and felling are interrelated. Productivity can be improved through educating and training operators in the yarding operations. Mini-forwarder is needed to use because of higher productivity and lower cost than mini-truck. The operational productivity of felling and bucking by chain saw was $66.96m^3/man{\cdot}day$ and $43.86m^3/man{\cdot}day$ at site 1 and 2 respectively. The yarding productivity was $5.68m^3/man{\cdot}day$ by yarder attached on tractor, $10.74m^3/man{\cdot}day$ by tower-yarder. The forwarding productivity was $21.29m^3/man{\cdot}day$ by mini-truck, $28.57m^3/man{\cdot}day$ by mini-forwarder. The chipping productivity was $4.42m^3/man{\cdot}day$ by mini-chipper, $21.87m^3/man{\cdot}day$ by large-chipper.