• Title/Summary/Keyword: 소형선

Search Result 581, Processing Time 0.025 seconds

Dual-Band Unequal Power-Divider Miniaturized by Metamaterial CRLH Phase-Shift Lines (메타 재질 구조 CRLH 전송선 기반 소형 이중 대역 비균등 전력분배기)

  • Eom, Da-Jeong;Kahng, Sung-Tek
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.23 no.9
    • /
    • pp.1048-1057
    • /
    • 2012
  • In this paper, a new compact dual-band unequal power divider is suggested. Instead of the quarter wavelength transmission line(TX-line)s for the branches of the conventional Wilkinson's power divider, we use composite right- and left-handed(CRLH) phase-shift lines and can reduce the physical length. With the non-linear dispersion of the meta-meterial, each branch in the proposed divider is designed to have $+90^{\circ}$ and $-90^{\circ}$ at $f_1$ and $f_2$ respectively. To validate the proposed method, the performances of the circuit and full-wave simulation results are shown with the CRLH dispersion curve. The measurement results are compared with the simulation results. Also, the size reduction effect by the proposed scheme is addressed.

Cancer Treatment Equipment Development Using laser-Driven Ion Acceleration Technology (레이저 이온 가속 기술을 이용한 암 치료 기기 개발)

  • Jung, M.Y.;Joe, W.B.;Park, J.W.;Hwang, H.W.;Yang, S.K.;Song, D.H.;Park, H.J.;Shin, D.H.;Pyo, H.B.;Park, S.J.;Park, S.H.
    • Electronics and Telecommunications Trends
    • /
    • v.28 no.4
    • /
    • pp.23-34
    • /
    • 2013
  • X-선 혹은 감마선 등 종래의 방서선 치료는 양성자 혹은 이온에 의한 치료방법의 등장함에 따라 퇴조할 것으로 보인다. 그 이유는, 양성자 등 전하를 띄는 입자치료기술이 치료 후 후유증이나 암의 재발을 현저히 억제시킬 수 있기 때문이다. 전하를 띄는 입자는 암 조직 전후의 정상 조직에 최소한의 피폭을 주나, X-선이나 감마선과 같은 광자들은 암 조직 전후의 정상세포가 암세포로 변화될 수 있는 정도의 피폭량을 주는 것으로 알려져 있다. 현재 임상 중인 양성자(혹은 극히 일부의 탄소이온 치료기)치료기는 1990년 미국의 로마린다(Loma Linda) 대학에서 최초로 건립된 방식인 사이클로트론 혹은 싱클로트론 가속기와 빔라인 및 겐트리(gantry)로 구성된다. 그 장치의 거대함만큼이나 가격과 유지비 등에서 일반 소형병원에서 운영하기에는 쉽지 않아 보인다. 이에 본고에서는 소형병원에서도 운영할 수 있는 저비용의 레이저 양성자(이온) 가속방식의 등장 배경과 향후 전망을 논하고자 한다.

  • PDF

A study on the optimization of light weight high efficiency shield for gamma-ray imaging detector (감마선 영상화 장치용 경량 고효율 차폐체 최적설계에 관한 연구)

  • Park, Gang-teck;Lee, Nam-ho;Hwang, Young-gwan
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2016.05a
    • /
    • pp.773-774
    • /
    • 2016
  • In this study, we perform the weight reduction and miniaturization of the shielding element that is applied for gamma-ray detectors for imaging of gamma-ray source. Through previous studies, we implemented a lead-based shielding element that represents the shielding effectiveness and performance of commercially available gamma-ray imaging apparatus similar to the shielding body. In this paper, we designed a tungsten-based shield for weight reduction and miniaturization than lead-based shield. We performed the MCNP simulation for shield design and then we obtained the results of reducing the weight of the 17% and 51% of the volume.

  • PDF

Design for Miniaturization of Oscillators using Common DGS (공통 DGS를 이용한 발진기의 소형화 설계)

  • Lim, Jongsik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.5
    • /
    • pp.2443-2448
    • /
    • 2013
  • In this paper, a design of size-reduced microwave oscillator using common defected ground structure (common DGS) is described. At first, an oscillator is designed using the normal stub resonator, and the conventional DGS patterns are inserted for the first trial of size-reduction. Finally, the DGS resonator section is folded by half size in order to adopt the common DGS, and this produces the proposed size-reduced oscillator. Common DGS pattern is inserted for a better size-reduction than when conventional DGSs are used. The folded transmission line is connected using the 3-dimensional signal via-holes. For an example of design, a 2.1GHz oscillator is designed and fabricated using a small signal transistor and common DGS, which shows the size-reduction of 11 mm. The measurement shows 6.7dBm of output power and -133dBc/Hz@1MHz of phase noise. The measured performances are so similar to those of the oscillators before size-reduction and prove the proposed size-reduction method of oscillators using common DGS.

A Study on the Application of RFID Technique for Improving Small Vessel Safety Management System (소형선박 안전관리 개선을 위한 무선인식 (RFID)기술적용 시스템 구축방안 연구)

  • Jeong, Yong-Geun;Choi, Kyong-Il;Lee, Hee-Joon
    • Journal of Korea Ship Safrty Technology Authority
    • /
    • s.28
    • /
    • pp.19-35
    • /
    • 2010
  • 본 연구에서는 2톤 미만 소형선박에 대한 효율적인 안전관리를 위하여 RFID(Radio Frequency IDentification)시스템의 실제 해양환경에서의 도입타당성을 검증하였다. 이를 위하여 FRP Fiber Glass Reinforced Plastic 선박을 중심으로 목선과 알루미늄선에 태그를 부착하고 이동형 Reader를 활용하여 태그정보를 확인하는 실제 해양환경 인식실험을 실시하였다. 해양환경 인식실험을 위하여 4종의 태그를 선정하였으며 다양한 각도에서 인식률 및 인식거리를 측정하여 그 특성을 파악하고자 하였다. 특히, 선박에 설치된 무선설비로 인한 전파장애, 염분, 수분, 온도 등 열악한 해양환경에서 무선인식(RFID)기술의 기술적 환경적 문제점 유무를 분석하였으며, 2톤 미만 소형선박 소유자의 편의성 제고를 위하여 유관기관과의 관련정보 공유를 통한 연계방안으로 무선인식(RFID)기술을 적용한 효율적인 선박안전관리체계 구축방안을 강구하여 선박등록 및 검사업무에서의 활용방안을 제시하였다.

  • PDF

A study on the standardization of pleasure boat vocabulary (단정(플레저 보트) 용어 표준화 방안 연구)

  • Ming-Su Kang;Hyen-Woo Kim;Yeong-Min Park;Jang-Gon Im
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2022.11a
    • /
    • pp.327-328
    • /
    • 2022
  • 'KS V 0054–단정용어' 는 '스포츠 및 오락용 단정' 의 용어에 대하여 규정하고 있다. '스포츠 및 오락용 단정'은 "플레저 보트" 라고 부르기도 한다. 특히, 단정(短_짧을 단, 艇_거룻배 정)은 소형선의 총칭으로 현재 국내에서는 소형 선박, 레저 보트, 플레저 보트, 레저 선박, 수상레저기구, 동력수상레저기구 등 용도 및 관계 법령에 따라 달리 정의하고 있다. 이에 일본식, 한자식 용어와 외래어가 혼용되어 사용되고 있는 플레저 보트(선체, 의장품, 범장 등)의 용어 표준화 방안을 제시 하고 또한 'KS V 0054–단정용어' 의 개정 방안을 제시 하고자 한다.

  • PDF

A Study on the Ventilation Conditions for the Prevention of Spontaneous Combustion of Small Ship Engine Room (소형선박 기관실의 자연발화 방지를 위한 환기조건에 관한 연구)

  • Park, Chan-Su
    • Fire Science and Engineering
    • /
    • v.22 no.4
    • /
    • pp.11-19
    • /
    • 2008
  • In order to show the most suitable ventilation conditions for the prevention of spontaneous combustion of small ship engine room, We have performed CFD simulation and analyzed flow and temperature fields. The flow patterns indicated differently according to the number and location of supply and exhaust opening. The case of locating the exhaust openings at the center of left and right side ceiling to the longitudinal symmetric line were more effective to eliminate the generated heat. When the number of supply and exhaust openings were increased, the case of increasing the number of exhaust opening showed more suitable ventilation conditions. The most suitable ventilation conditions in order to prevent the spontaneous combustion of small ship engine room was predicted that the supply opening located at the center of front and after side ceiling to across symmetric line, and the exhaust opening located at the center of both side walls.

Design of partial discharge sensor in rotating machines (저.고주파용 부분방전 센서 해석 및 설계)

  • Park, Yoon-Mi;Heo, Chang-Geun;Lee, Jung-Yub;Jung, Hyun-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2005.07c
    • /
    • pp.2253-2255
    • /
    • 2005
  • 운전 중인 회전기기에서 고정자 권선의 절연 상태는 부분방전시험을 통해 검사, 평가할 수 있고 이를 통하여 사고예방을 위한 진단을 할 수 있다. 기존 센서인 SSC(Stator Slot Coupler)는 비접촉식으로 권선의 웨지 아래에 설치하므로 설치하기가 불편하고 Global VPI 방식으로 제작된 소형 회전기에는 사용할 수 없는 단점이 있다. 본 논문에서는 소형 회전기에 사용 가능한 저, 고주파용 부분방전 센서를 제안하였다. 웨지 위에 설치 가능한 SSC 형태의 마이크로스트립 센서 및 2선 평행 전송선로 센서는 고주파에 적합하고 저렴하며 소형 회전 기에 설치 가능하다. 센서의 성능을 검증하기 위해 3차원 해석 프로그램을 사용하여 좋은 전자파 검출 성능을 도출할 수 있었다. 또한 저주파용으로 제안된 U 타입 센서는 유도전류를 검출하는 센서로서 슬롯 외부에 설치되어야 하고 시간차분 수치해석을 이용해서 저주파에서 효과적으로 방전 펄스를 검출함을 확인할 수 있었다.

  • PDF