• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.193-196
• /
• 2007

The motor case for the KSLV-I KM is the first satellite launch vehicle ever to be developed by Korea to deliver the 100 kg class satellite into Earth's low orbit. This SLV is made of two stages, and the 2nd stage is made of solid rocket motor. The motor case of the KM is made of all composite materials except for the interface structures. Manufacturing process for the motor case such as insulation, filament winding for the motor case, fabrications for the interface structures will be discussed in this paper.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1473-1478
• /
• 2012

This paper presents the development of a fracture-type protector for carrying a reconnaissance robot to a remote target area. Instead of a conventional unlocking mechanism, a separation method based on the fracture of assembled parts was implemented in the proposed lightweight protector in order to improve the feasibility for a real battlefield. Simulations using the finite element model of the protector and the robot were performed to verify the fracture under the given loading conditions, and shock experiments using a drop table were performed to calculate shock transmittance through the protector to the robot. Several field tests for a 100-m flight proved that the proposed scenario (launching, flying, landing, and separation) was achieved successfully.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.70-75
• /
• 2024

The insulation performance of a common bulkhead propellant tank for small launch vehicles with variations in insulation thickness was analyzed. The common bulkhead propellant tank composed of a single part allows for lightweight design, as it eliminates the need for tank connections. However, problems such as propellant loss and ignition delay due to heat transfer caused by temperature differences between oxidizer and fuel may arise. Therefore, it is essential to verify the insulation performance of the common bulkhead structure that separates the oxidizer tank and fuel tank. In this study, transient heat transfer analysis was conducted for propellant tanks with insulation thicknesses of (50, 55, 60, 65, and 70) mm to analyze the insulation performance using boil-off mass. Subsequently, the boil-off mass of the oxidizer generated during the first-stage flight time of the propellant tank was determined. The results confirmed that increasing the insulation thickness reduces the boil-off mass, thereby improving the insulation performance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.2
• /
• pp.73-82
• /
• 2020

Additively manufactured, small rocket engines are perhaps the focal activities of space startups that are developing low-cost launch vehicles. Rocket engine companies such as SpaceX and Rocket Lab in the United States, Ariane Group in Europe, and IHI in Japan have already adopted the additive manufacturing process in building key components of their rocket engines. In this paper on technology trends, an existing valve housing of a rocket engine is chosen as a case study to examine the feasibility of using additively manufactured parts for rocket engines.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.148-157
• /
• 2015

In this paper, we propose a compact antenna hat to perform RF compatibility testing efficiently between the launch vehicle and ground stations. The proposed structure implements a small size and low loss using the conductive shield instead of the conventional RF absorber. The S-band antenna hat, which is fabricated for an inverted-F onboard antenna with the size of $74mm{\times}13mm{\times}16mm$, has the small enclosure of $88mm{\times}35mm{\times}44mm$, the return loss of 25.6 dB, the insertion loss of 0.26 dB, and the leakage loss of 49.4 dB at the center frequency of 2.25 GHz. The simulated and measured results show a good agreement.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.134-135
• /
• 2003

Medium-sized Aperture Camera (MAC)는 근적도궤도(Near Equatorial Orbit) 지구관측위성 MACSAT의 주탑재체로, 우리나라의 (주)쎄트렉아이와 말레이시아의 ATSB社와 오는 2004년 발사를 목표로 공동 개발되고 있다. MAC은 push-broom 방식의 전자광학 탑재체로, 지상해상도 2.5 m를 가지는 PAN band 1개, 지상해상도 5 m를 가지는 Multi-Spectral band 4 개를 가지고, 지상의 swath width는 20 km를 가진다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.136-137
• /
• 2003

Medium-sized Aperture Camera (MAC)는 근적도궤도(Near Equatorial Orbit) 지구관측위성 MACSAT의 주탑재체로, 우리나라의 (주)쎄트렉아이와 말레이시아의 ATSB社와 오는 2004년 발사를 목표로 공동 개발되고 있다. MAC은 push-broom 방식의 전자광학 탑재체로, 지상해상도 2.5 m를 가지는 PAN band 1개, 지상해상도 5 m를 가지는 Multi-Spectral band 4 개를 가지고, 지상의 swath width는 20 km를 가진다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.220-223
• /
• 2007

Acoustic test of the payload fairing of Korea satellite launch vehicle was conducted to verify the performance of acoustic protection system installed inside the payload fairing. This paper briefly introduces the acoustic test procedures and its results. Overall 148 dB acoustic loads were exerted on the payload fairing structures which mated with the upper stage structure of the launch vehicle. In order to verify the increase of insertion loss by the acoustic protection system, two kinds of test were performed. One is conducted with acoustic protection system and the other without acoustic protection system. Internal acoustic loads as well as external ones were measured and the measured insertion losses were compared with the requirement. The results showed that the acoustic protection system increases the insertion loss by more than 6 dB above 125 Hz. They also indicated that some design modification of Helmholtz resonator array is required to increase the insertion loss at a cavity resonant frequency.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.71-74
• /
• 2006

This study shows the historical background, and work flow of PRA (Probabilistic Risk Assessment) method which devised by NASA during the space development. It also illustrates the possibility of adoption of the method to evaluation of reliability KSLV project.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.193-196
• /
• 2006

Vibration overtests have been common problems in aerospace industry. A test item can be overtested at its resonances when it is excited by the traditional spectrum enveloping peaks in the field acceleration spectrum. This paper introduces the method of modifying the excitation specification to alleviate the overtesting problem. A vibration analysis was performed to estimate interface forces and acceleration responses. A finite element model that was verified by an extensive modal test enabled us to shape the acceleration input accurately The produced notched input will be used in the sinusoidal vibration test of the small satellite launch vehicle.