• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.35-38
• /
• 2004

IMO sub-committee on safety of navigation has worked a draft recommendation for RTE in order to amy a radar target enhancer(RTE) on small ships. According to the draft recommendation for RTE, we need a preliminary research for RTE development and its applicability. In this paper, we investigate the results rf field tests in other countries and analyze technical and critical problems in RTE The results of our analysis will provide helpful comments in IMO subcommmitte as well as in a domestic development of RTE.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2002.10a
• /
• pp.61-62
• /
• 2002

본 연구는 전보에서 개발한 RTX에 대한 응용 연구의 하나로써 레이더 영상 신호의 수록 및 해석에 부가하여 타선의 GPS 위치정보를 수신하여 자선의 전자해도(ENC) 및 radar 화면상에서 동시에 표시함으로써 이들 두 선박의 간격을 측정할 수 있는 선간거리계, 또한, 타선의 ARPA radar가 탐지한 영상신호, 타선의 기동정보(own ship data, OSD) 및 추적표적의 정보(tracked target message, TTM) 등을 자선의 레이더나 전자해도 화면상에서 실시간으로 모니터링하는 software를 개발하고, 이들의 레이더 정보를 필요에 따라 hard disk에 수록 및 재생할 수 있는 아주 간편하면서도 범용성이 있는 레이더 정보수록 및 해석 시스템을 개발하였다. (중략)

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.29-32
• /
• 2018

본 논문에서는 IR-UWB(Impulse-Radio Ultra Wideband) 레이더와 서보 모터를 이용한 실내 환경의 물체 위치(거리, 각도) 탐지 방법을 제안한다. 기존의 카메라나 적외선을 사용한 기술은 비용이 비싸고 장애물이 있을 시 측정이 어려워 정확도가 떨어지는 단점을 가지고 있다. 반면 IR-UWB 레이더는 저 전력, 저 가격, 소형으로 구현이 가능하고 광대역을 사용하여 투과성이 좋다는 장점을 가져 실내 환경의 물체 움직임 탐지에 적합하다. 하지만 IR-UWB 레이더를 이용한 물체 탐지 시 각도 측정 없이 거리만을 측정하기 때문에 물체의 정확한 위치를 탐지할 수 없다. 이러한 점을 보완하고자 레이더를 모터 위에 설치하고 모터를 180 도 회전시키는 방법을 사용함으로써 넓은 측정 범위를 가짐과 동시에 물체의 위치를 보다 정확히 탐지해내는 결과를 보였다.

• Water for future
• /
• v.45 no.8
• /
• pp.8-14
• /
• 2012

• The Magazine of the IEIE
• /
• v.40 no.2
• /
• pp.72-79
• /
• 2013

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.553-562
• /
• 2020

S-band, C-band and X-band radars are used for weather observation purposes. Since the Meteorological Administration, the Ministry of Environment, and Republic of Korea Air Force operate radars according to the purpose of observation by departments, the installation site and observation characteristics are different. From a meteorological point of view, blind observational areas in the low level with an elevation of less than 1 km around the mountainous terrain near Jirisan and Taebaeksan. Assuming a small radar installation, we simulated low-level observations. In order to monitor dangerous weather in North Korea, we analyzed the precipitation of North Korea and simulated a large radar network. Finally, a radar network for Korean Peninsula was proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.59-64
• /
• 2024

The small tracking radar randomly changes the transmission period to avoid deceptive signals such as RGPO (Range Gaet Pull Off) operated on the target. Since the code repeats after a specific section, it becomes difficult to avoid a deceptive signal when the repetition is exposed. In this paper, a more realistic transmission pulse code is generated by adding random code generation through FPGA and system white noise. We present the research results of code generation that generates PRF that can avoid repetition while using pseudo-random code in EPROM using FPGA. Also, the result of designing random PRF pulse was confirmed by applying it to tracking radar.

• ICROS
• /
• v.20 no.4
• /
• pp.37-43
• /
• 2014

소형 무인항공기가 발달함에 따라 영상센서의 활용이 증가하였다. 특히 발전된 컴퓨팅 파워와 소형화된 영상센서의 발달로 무겁고 값비싼 레이더 장비의 기술을 영상센서로 구현하는 연구가 활발히 진행 중이다. 영상 이동표적표시(Moving Target Indication MTI) 기법은 이런 시대의 흐름에 따라 발달된 기술이며 현재 미군의 소형무인항공기 RQ-11 Raven에 상용화 되었다. 본 논문에서는 소형 무인항공기용 영상 MTI 기법의 원리를 설명하고 영상 MTI에서 주로 사용하는 카메라 운동 보 정 기법인 매개변수/비매개변수 방식의 영상정합의 접근법을 위주로 설명하였다. 또한 소형 무인항공기용 영상감시시스템 구현에서 가장 큰 문제점인 시차/항공기 진동 보정에 대한 진행 중인 연구논문도 소개하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.661-670
• /
• 2013

In this paper, we propose the measurement techniques of mixed waveform. Mixed waveform has phase-continuous periodic waveform with fixed frequency signal and Linear Frequency Modulation(LFM) signal. This waveform is generated from a compact radar transmitter with frequency synthesizer and high power amplifier. Frequency synthesizer generates various signal waveform with continuos phase and high power amplifier amplify transmitting signal. First, we describe a compact radar transmitter with the phase-continuos signal and then verify the distortion characteristic of pulse compression by the mismatch of LFM waveform. Second, we describe three kinds of measurement techniques for measuring LFM waveform. These techniques include methods using signal analyzer, signal source analyzer and new methods using RF mixer and phase shifter. Finally, we verify the accuracy of the measurement technique from the pulse compression result of receiving signal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3121-3129
• /
• 2009

Conventional marine radar systems utilize pulse radar which is capable of high-power transmissions and is effective for remote detection purposes. A pulse radar is most commonly used on medium or large vessels due to its expensive installation and maintenance costs. I propose the use of a Frequency Modulated Continuous Wave (FMCW) radar system operated at low-power and high-resolution instead of the conventional pulse-radar based system. The transmitted and received signals of the FMCW radar system were theoretically analyzed and radar signal processing design and simulation experiments were performed to detect the range and speed. Intermediate Frequency (IF) signal mixed with virtual transmit and receive signals were generated to perform FMCW radar signal processing simulations where the IF signal underwent noise reduction through a lowpass filter. The maximum frequency was derived through the sample interval of the FFT size instead of using A/D converter. This maximum frequency was used to get the frequency range and frequency speed which were in turn used to calculate the range and speed. The virtual beat frequency generated using MATLAB is utilized to analyze the beat frequency used in the actual FMCW radar system signal processing. The differences in the range and speed of the beat frequency signals are processed and analyzed.