• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.1
• /
• pp.59-66
• /
• 2013

This study rehabilitation assistive technology system for people with disabilities employed by a company in the field of occupations and job satisfaction have adapted to, and for the rehabilitation assistive technology support(rehabilitation assistive technology hardware and the software) and service quality based on the quality of convenient for employees to work life by analyzing the factors that can act on adaptation employees on behavioral intentions was to determine the overall impact. Seoul, Gyeonggi, Incheon companies based in vocational education and training received in the employment of the disabled subject questionnaires were distributed, and finally 594 valid questionnaires were minor. In order to test the hypothesis SEM(structural equation model) were used, the results of this study can be summarized as follows. First, rehabilitation assistive technology hardware quality of the quality of rehabilitation assistive technology software affected. Second, rehabilitation assistive technology software quality on the quality of the service quality affected. Third, rehabilitation assistive technology hardware quality on the quality of the service quality affected. Fourth, quality of service, the quality of the adaptation of action for employees affected also. Fifth, rehabilitation assistive technology software for adaptive quality of the employees also had an impact on behavior. Sixth, rehabilitation assistive technology hardware to adapt the quality of the employees affected. And parameters (quality of service quality) influenced to as indirect effects. The results of this study support the rehabilitation assistive technology and rehabilitation assistive technology hardware and software) based, quality of service and quality of fused form acceptable to, the degree of action for employees to adapt more implications that may affect have provided.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.13-23
• /
• 2010

This study was performed to compare the quality of image processing between the newly developed prototype using light emitting diode(LED) and the conventional $DIFOTI^{TM}$ system(EOS Inc., USA). To estimate the optimal light emitting power for the improved images, primary enamel surfaces treated under Carbopol 907 de-mineralizing solution were taken daily during 20 days of experimental periods by both DIFOTI systems. The results of comparative analyses on the images obtained from both systems with polarized image as gold standard can be summarized as follows: 1. Trans-illumination indices of images taken from primary enamel surfaces were decreased with time in both systems. 2. The differences of intensity of luminance between sound and de-mineralized enamel surface in prototype DIFOTI system was shown to be relatively smaller than conventional $DIFOTI^{TM}$ system. 3. From the comparative analysis of images from both DIFOTI system with polarized images as gold standard, the difference between sound and de-mineralized enamel surface of intensity of luminance of $DIFOTI^{TM}$ system was more correlated to polarized images than prototype of DIFOTI system. With the optimal LED emitting power, the control of aperture of digital camera is considered as the another key factor to improve the DIFOTI images. For the best image quality and analysis, the development of the improved image processing software is required.

• Journal of Service Research and Studies
• /
• v.10 no.3
• /
• pp.67-80
• /
• 2020

The information system audit service has been recognized for its effectiveness in improving the management efficiency of informatization projects in the public sector and improving the quality of information systems. However, according to several recent studies, it is not very helpful in securing quality by indicating formal audit performance and incorrect functions or errors in a short audit period. So, if the effectiveness of audit is proved to ensure the quality of the information system from the perspective of the software life cycle and to successfully operate and maintain it, the use of audit for the successful construction of the information system will be an essential factor. Therefore, this study investigated whether the current audit service users are satisfied with the current information system audit and what they expect. If it is different from what was expected, the difference between expectations and performance was analyzed to improve user satisfaction, and a survey was conducted through interviews with experts in the information system field. Based on the empirical results through the questionnaire, in order to reduce the difference in expectations from the user's point of view in the information system audit service, a plan to improve the audit system suitable for the new audit environment was proposed.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.99-112
• /
• 2015

Datum point for displaying location and altitude of point has being advantage usefully in various measurement parts. However, datum point has been increasing loss cases owing to weather changes and stratum changes and neglecting meaninglessly. In this paper, we design and implement a multi electronic measurement system monitoring software with functions such as include maximize utilization of existing measurement datum system as well as collected various environment data and detection stratum changes of surround area. Proposed software is implemented to support that reusability and extensibility of software using object oriented modeling method. Our software supports a GUI for electronic measurement datum point administrator as well as for web user and mobile user. Our system can support a graph GUI for various data analysis and reposition in realtime to database that measured location information and various sensing information to prevent loss of electronic measurement datum point and to detected stratum changes. In addition, we include a QR code and RFID recognition function. Finally, we suggest performance evaluation result to confirm stratum changes detection and GPS location error rate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2009

With supply of the domestic digital camera, the relative importance of the digital camera is coming to be high gradually on aerial photogrammetry, the image of digital camera is more applied in image map or digital topographic map production. But, there are cases that do not have position information or attitude information of each photograph in digital camera results. Therefore, we wish to present additional method to get more accurate photograph control point result. In this study, One is called A method, which is the case of entering positioning information of principal point from topographic map as default values that are need to extract tie point automatically using by 56 pieces of photography that are photographed by DMC to the extent to 5 courses and 35 GCP points. The other is called B-method, which is the case of entering exterior orientation parameters that are processed by block adjustment for A-method using by 4 control points in method-1 as default values. We have analyzed about results per control points arrangement for two cases using MATCH-AT that is photograph control point measurement S/W of Germany INPHO company. As a result of analysis, accuracy of B-method was better than that of A-method, and we could get more accurate results if block adjustments are executed including self calibration. Also, it is more effective in expense side that using self calibration for photograph survey in B-method because can reduce GCP numbers.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.13-23
• /
• 2008

In coastal region, eutrophication, Do deficit and red tide are frequently occurred by influx of fresh water. When the fresh water containing pollutants is discharged into the sea, the surrounding water is contaminated by dispersion of freshwater flowing into coastal waters. The prediction and analysis about the dispersion process of the discharged fresh water should be conducted. A modeling system using GUI was developed to simulate hydrodynamic flow and fresh water dispersion in coastal waters and to analyze the results efficiently. The modeling module of the system includes a tide model using a finite element method and a fresh water dispersion model using a particle-tracking method. This system was applied to predict the tidal currents and fresh water dispersion in Mokpo coastal zone. To verify accuracy of the hydrodynamic model, the simulation results were compared with observed sea level and time variations of tidal currents showing a good agreement. The fresh water dispersion was verified with observed salinity distribution. The dispersion model also was verified with analytic solutions with advection-diffusion problems in 1-dimensional and 2-dimensional simple domain. The system is operated on GUI environment, to ease the model handling such as inputting data and displaying results. Therefore, anyone can use the system conveniently and observe easily and accurately the simulation results by using graphic functions included in the system. This system can be used widely to decrease the environmental disaster induced by inflow of fresh water into coastal waters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7729-7735
• /
• 2015

As plastic injection mold parts is suitable system mass production making mold. So thick steering wheel parts is desirable to carry out gas injection molding. Gas injection mold is skill to inject nitrogen gas postfilling melting raw material into mold. Gas injection mold have many advantage like retrenchment of material cost, upgrading the guality. etc. It was decided gate position to minimize warpage of parts analysis injection mold process using mold flow software and incase doing gas injection mold using normal p.p material. it occur big warpage. so it is object minimizing warpage of injection parts to change p.p material containing mineral 18% and removing fingering phenomenon trouble as changing gate position. Also in case carrying out gas injection mold, I did comparison and analysis to grasp shape flow in gas setting a standard gate after flowing in raw material. Through this study, I found out changing of thickness by parts shape and it can occur warpage of parts by plastic material even though it carry out gas injection mold and it had a direct influence on trouble of parts by gate position.

• Journal of KIISE:Software and Applications
• /
• v.33 no.11
• /
• pp.942-952
• /
• 2006

We propose an automatic segmentation method for identifying pulmonary structures using gray-level information of chest CT images. Our method consists of following five steps. First, to segment pulmonary structures based on the difference of gray-level value, we select the threshold using optimal thresholding. Second, we separate the thorax from the background air and then the lungs and airways from the thorax by applying the inverse operation of 2D region growing in chest CT images. To eliminate non-pulmonary structures which has similar intensities with the lungs, we use 3D connected component labeling. Third, we segment the trachea and left and right mainstem bronchi using 3D branch-based region growing in chest CT images. Fourth, we can obtain accurate lung boundaries by subtracting the result of third step from the result of second step. Finally, we select the threshold in accordance with histogram analysis and then segment radio-dense pulmonary vessels by applying gray-level thresholding to the result of the second step. To evaluate the accuracy of proposed method, we make a visual inspection of segmentation result of lungs, airways and pulmonary vessels. We compare the result of the conventional region growing with the result of proposed 3D branch-based region growing. Experimental results show that our proposed method extracts lung boundaries, airways, and pulmonary vessels automatically and accurately.

• Journal of Science Education
• /
• v.44 no.2
• /
• pp.183-196
• /
• 2020

This study explores the effects of STEAM program using Arduino on preservice science teachers toward their STEAM core competencies. The STEAM program using Arduino consists of four stages: presentation of situation, creative design, emotional touch, and evaluation. The preservice science teachers learned the theoretical backgrounds of STEAM and Arduino. Then, they were given the chance to think about an environmental issue, which is fine dust. The preservice teachers designed an air cleaner and a fine dust measuring instrument using Arduino. The preservice science teachers also produced the air cleaner and the measuring instrument using Arduino. They measured the level of fine dust in the classroom before and after the use of the air cleaner. That is, the preservice teachers experienced each stage of STEAM: seriousness of fine dust, design and production of the measuring instrument of fine dust and air cleaner, and evaluation of the effectiveness of air cleaner. Further, they reflected on their experiences of STEAM program using Arduino. The results indicate that these preservice science teachers statistically improved communication competency, problem-solving competency, gathering information competency, logical analytical thinking competency, and creativity competency. However, there were no statistical improvements on teamwork competency and self-development competency. This study suggests that experiencing STEAM program using Arduino is valuable for the preservice science teachers to develop STEAM core competencies and further implement STEAM program their science classes in the future.

• Journal of the Korean association of regional geographers
• /
• v.15 no.6
• /
• pp.752-762
• /
• 2009

This paper aims to investigate the characteristics of location and business-services networks of venture firms in Daegu region. The regional venture firms are small scale and consist of mainly R&D investment and license new-technology in the category of soft-ware. Since the mid-1990's the firms that were founded by people with higher education and career experience seek diverse growth strategies. those firms concentrate in some regions of dalseo-gu and buk-gu. There are a few difference by types of firm-business, but, on the whole, the princepal location factors of venture firms are accessibility of research institute and university, easy information availability, and use of moderate land. In regard to networks with client firms, the venture firms determine whether to transfer. The result of the characteristics of networks between regional venture firms and business-service enterprises is as follows; the regional venture firms utilize small number of business-service enterprises and use mainly information processing and other computer operation related services and professional, scientific and technical services. In business-service be used by regional venture firms, the frequency of information processing and other computer operation related services, research and development, business support services is much, while the frequency of professional, scientific and technical services is little. Business-service enterprises are distributed mostly in Daegu region and are used owing to lack of technology and knowledge.