• 한국화재소방학회논문지
• /
• 제32권3호
• /
• pp.67-75
• /
• 2018

공동주택 화재 발생시 인명피해 최소화 및 재실자의 신속한 대피를 위해서는 화재 발생 사실이 경보음을 통해 전체 세대로 전달되어야 한다. 공동주택의 경우 엘리베이터 실과 같은 공용공간에 경종이 설치되어 있으나, 세대내 공간으로 경보음이 충분히 전달되지 못하는 것으로 알려져 있다. 본 연구에서는 실제 공동주택에서의 주,야간 소음을 측정하여 공동주택 세대 내 소음 발생 실태를 조사하고 세대내 공간으로의 경보음 전달 정도를 분석하였다. 엘리베이터 실에서 발생되는 경보음이 공동주택 내부로 전달되는 경우 방화문 및 방문의 차음성능으로 인해 충분히 전달되지 못하는 것으로 나타났다. 공동주택 내에서 발생되는 각종 소음 레벨을 고려하면 공동주택 외부에서 발생되는 경보음을 청취하여 피난행동을 시작하는 데는 어려움이 있는 것으로 판단된다. 이를 개선하기 위해 공동주택 거실의 월패드와 각 방별로 경보음 발생기를 설치한 경우에 대하여 음향시뮬레이션을 실시하였다. 각 방별로 경보음 발생기를 설치한 경우에서만 배경소음 + 15 dB 기준과 75 dB (A) 기준을 만족하는 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.106-112
• /
• 2017

The present study describes flow induced noise generated from a ball valve used for a gas pipeline. Noise generation from a ball valve mainly induces by interference between unstable(or fluctuating) leakage flow and pipe wall when the ball valve is working closed or opened. To measure the positions of the noise source and the amplitude of noise with respect to measuring frequencies, a commercial acoustic camera is introduced. Noise characteristics generated by the ball valve have been performed by four valve opening rates: 30, 50, 70 and 100 percents. It is noted that 100 percent opening rate means that the valve is fully opened. Throughout the experimental measurements using the acoustic camera, the location of the noise source and the noise amplitude with respect to the frequencies for the test ball valve are clearly evaluated. It is found that the dominant frequencies come from the fluctuating flow at the downstream of the ball valve for four opening rates are observed between 3,000Hz and 3,200Hz. Maximum noise amplitude comes from the ball valve reaches 75dB at the valve opening rate of 50 percent.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1162-1168
• /
• 2007

In many fire emergencies, the audible fire alarm signals are very important to save the occupant's life. But as the sound insulation of building elements has been improved, it is more difficult for occupant to recognize the fire alarm signals when the fire alarm worked. This is the study to show the sound attenuation of the fire alarm sounder system in apartment buildings. We measured and analyzed the sound attenuation level in 17 units, and the results were compared with the minimum sound level at sleeping area by NFPA(National Fire Protection Association) 72. When only the fire alarm worked in stair hall, the sound levels in bedroom were in the range of $30.6{\sim}42.8dB(A)$ and the differences between sound level and ambient sound level in bedrooms were in the range of $7.1{\sim}13.8dB(A)$. And when the emergency broadcasting device in the livingroom and the fire alarm worked simultaneously, the sound levels in bedrooms were in the range of $54.2{\sim}63.0dBA$. Finally, it was showed that the fire alarm sounder system didn't give a sufficient sound level in bedroom to awake out of sleep.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.515-518
• /
• 2007

SAFRS(Spontaneous Acoustic Field Reproduction System) is a system to sense changes of surroundings and produce sounds which can go well with environment elements sensed by the system in to the space. The sounds were judged by individual evaluation and, the classification of the preferred sounds according to the mood of the space was suggested in the former study. Effectiveness of SAFRS with field application was validated by prior studies which dealt with researching acoustic environment, evaluating images of sounds, and rating environment with existence and nonexistence of sound resources such as fountains and the system after applied in D university. In this study, for more effective field application of SAFRS, research for the acoustic environment around sound resources and subjective evaluation of the preference of the sounds from the resources were made and it was considered that the results of the experiments should be primary information to propose proper sound level to be offered by the system. The results of the study are as follows; 1) It was considered that the ambience of the center road was dependent upon produced sounds by the system and water sounds of the fountain and that of walk way was mostly dependent upon produced sounds. 2) The results of the subjective evaluation showed that the distance from sound resources was suggestive; the more distant from produced sounds the less full and clear the sounds, the less distant from the sounds of water the more delight and idyllic ambience, and the less distant from the forest the more idyllic ambient and diversity. 3) The results upwards were telling that an average value of six elements for the evaluation was even at the place set back 10.2m from center road and walk way. And harmony of all sounds of the place should be considered to propose suitable sound level of SAFRS.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.339-347
• /
• 2014

Floor impact sound in high-rise apartment building became one of social problems. A lot of civil complaints on floor impact sound occur continuously and the number of disputes between neighbors in small and aged apartment buildings is increasing. Interests on heavy-weight impact sound pressure level measurement and evaluation method is increased. Previous study reported that heavy-weight impact sound level was changed by the sound field condition of receiving reverberation chamber. In this study, heavy-weight impact sound pressure level change by the receiving sound field condition was measured in standard test facility and mock-up test room. These two experimental conditions were designed to simulate averaged living room of common apartment units. By the change of sound absorption power in receiving room, heavy-weight impact sound pressure level in most of frequency bands were changed in standard test facility and mock-up room. Normalized maximum sound pressure level regulated in ISO 16032 showed wider range of heavy/soft impact sound pressure level. Heavy/soft impact sound pressure level change was became smaller by the application of standardized maximum sound pressure level and ISO/CD 10140-3 Amd 2 method. In the case of standardized maximum sound pressure level, absolute sound pressure level changed. From these results, receiving sound field correction method regulated in ISO/CD 10140-3 Amd 2 is needed for the precision measurement and evaluation of heavy-weight impact sound.

• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.180-188
• /
• 2014

현대자동차그룹은 HSM이라고 불리는 간략화된 차량 모델에 대하여 썬루프 버페팅 현상의 실험적인 조사를 시행하였다. 현대자동차그룹은 어떤 CFD솔버가 충분한 정확도를 가지고 썬루프 버페팅 현상을 예측하는지 조사하기 위해 상용CFD공급업체의 참여를 요청하였다. ANSYS Korea는 이번 조사에 참여하여 ANSYS fluent를 이용하여 HSM의 썬루프 버페팅에 대한 수치해석을 수행하였다. 먼저 유동장 검증을 위해 풍속 60 km/h에 대하여 썬루프가 닫힌 HSM모델에 대하여 해석을 수행하였다. HSM상부 면의 세 지점에서 속도 분포를 예측하였고, 이는 시험결과와 비교되었다. 그런 다음 고해상도 난류 모델인 DES를 이용한 해석이 전 풍속영역에 걸쳐 수행되었다. 버페팅 주파수와 버페팅 음압레벨이 예측되었고, 이는 시험결과와 비교되었다. 이를 통해 실제 차량 개발을 위한 CFD의 예측 가능성에 대하여 결론을 얻을 수 있었다.

• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.274-281
• /
• 2013

Field measurement method of heavy/soft impact sound pressure level which is regulated in JIS and ISO has been using in Korea, Japan and Canada. It is reported that heavy/soft impact sound pressure level was varied by the sound field condition of receiving room such as sound absorption power and room volume. In this study, it is checked that heavy/soft impact sound pressure level was affected by the receiving sound field condition. Rubber ball and bang machine sound pressure level was measured in the vertically connected reverberation chamber. In oder to check the effect of receiving sound field on heavy/soft impact sound pressure, sound absorption power was changed with polyester sound absorption blankets with air space and glass wool. The reverberation time at 1 kHz band was changed from 10 s to 0.2 s by sound absorption material. Rubber ball sound pressure level measured without sound absorption material was 58 dB in $L_{i,Fmax,AW}$, but the level was 46 dB with sound absorption treatment. From this result, it is confirmed that sound field correction method is needed in the heavy/soft impact sound pressure level measurement method using bang machine and rubber ball.

• 한국소음진동공학회논문집
• /
• 제17권6호
• /
• pp.547-552
• /
• 2007

SAFRS(spontaneous acoustic field reproduction system) is a system to sense changes of surroundings and produce sounds which can go well with environment elements sensed by the system in to the space. The sounds were judged by individual evaluation and, the classification of the preferred sounds according to the mood of the space was suggested in the former study. Effectiveness of SAFRS with field application was validated by prior studies which dealt with researching acoustic environment, evaluating images of sounds, and rating environment with existence and nonexistence of sound resources such as fountains and the system after applied in D university. In this study, for more effective field application of SAFRS, research for the acoustic environment around sound resources and subjective evaluation of the preference of the sounds from the resources were made and it was considered that the results of the experiments should be primary information to propose proper sound level to be offered by the system. The results of the study are as follows; 1) It was considered that the ambience of the center road was dependent upon produced sounds by the system and water sounds of the fountain and that of walk way was mostly dependent upon produced sounds. 2) The results of the subjective evaluation showed that the distance from sound resources was suggestive; the more distant from produced sounds the less full and clear the sounds, the less distant from the sounds of water the more delight and idyllic ambience, and the less distant from the forest the more idyllic ambient and diversity. 3) The results upwards were telling that an average value of six elements for the evaluation was even at the place set back 10.2m from center road and walk way. And harmony of all sounds of the place should be considered to propose suitable sound level of SAFRS.

• 한국지반공학회논문집
• /
• 제22권12호
• /
• pp.33-43
• /
• 2006

직항타공법에서 사용되는 해머 쿠션의 재질 차이가 항타시 주변 지반의 진동과 발생 소음 및 에너지 전달효율에 미치는 영향을 실내 모형시험을 통해 평가하였다. 항타 과정을 모사할 수 있는 모델 말뚝과 항타시스템 및 스트레인 게이지와 홉킨슨 바(Hopkinson bar)를 이용한 에너지 전달효율 측정장치를 제작, 구성하였다. 해머 쿠션 재질로는 상용의 해머 쿠션재인 Micarta 이외, 현장에서 다수 사용하는 Plywood, Polyurethane, Rubber(SBR), Silicone rubber 등의 5가지 재료를 선정하여 항타시험을 실시하였다 항타시험결과 쿠션 재료별 에너지 전달효율은 (1)Micarta, (2)Polyurethane, (3)Plywood, (4)Rubber(SBR), (5)Silicone rubber의 순이었다. 또한 에너지 전달효율이 높은 쿠션재료가 음압레벨의 평균치 또한 높은 비례관계를 보였다. 항타 종료후 말뚝 정재하시험을 실시하여 말뚝의 지지력과 축하중전이 특성을 비교, 분석한 결과 Micarta와 Polyurethane이 다른 쿠션재료에 비해 높은 지지력 값을 보였다.

• 한국음향학회지
• /
• 제34권5호
• /
• pp.371-376
• /
• 2015

본 연구는 지그재그 형상의 음향메타물질 구조체를 1:1, 1:2와 1:4의 축척으로 구성하여 순차배치시킴으로써 나타나는 광대역 음파차단 현상을 유한요소법을 이용하여 분석하였다. 그 결과 단위격자를 축소시킨 구조체의 투과 음압레벨(Sound Pressure Level, SPL)은 각 구조체의 독립적인 투과 특성을 중첩한 것과 같은 효과를 얻었으며 이로인해 음파차단 대역폭과 크기가 현저히 증가하는 것을 볼 수 있다. 또한 유효물질 이론을 이용하여 음향메타물질이 매질의 임피던스와 굴절률을 높이는 것을 확인 하였다. 본 연구를 통해 다양한 메타물질을 이용하고 이를 단위격자를 축소시킴으로써 효과적인 광대역 소리차단을 실현 할 수 있을 것으로 기대된다.