• Journal of the Korea Institute of Building Construction
• /
• v.15 no.1
• /
• pp.123-131
• /
• 2015

The purpose of this study is to analysis the noise characteristics about noise type, sound level, and noise occurrence frequency of living noise in residential buildings. The field measurement was conducted to classify the types of living noise and to examine the actual states of noise occurrence for each living noise source. Among the 24 types of living noise, 10 noise sources were selected based on the loudness and frequency of each living noise. The result indicated that 10 noise sources show the difference on each noise occurrence characteristic by time zones. Therefore, to reduce noise, a management plan should be introduced based on the actual state of the noise occurrence, considering the individual noise source and the time slot during noise frequently occurs. Moreover, the noise standard for each noise types of living noise should be specificated and the education for residents about characteristics of living noise types should be conducted to improve the consciousness of residents.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.300-308
• /
• 2018

The contribution analysis of various external aeroacoustic noise sources to interior noise is important, enabling to design an automobile with a low interior noise level. With a new technique, the CD (Cholesky Decomposition), it is proposed to decompose an overall interior noise spectrum into multiple spectra, each representing the contribution of a specific noise source to the interior noise. In order to validate this method, three kinds of experiments were conducted. Furthermore, it is proposed to improve the CD-based contribution analysis method to be integrated with existing exterior microphone arrays in the wind tunnel. This method was validated with an experiment with two speakers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.704-709
• /
• 2014

본 연구는 현재 사회문제화 되고 있는 층간소음 피해 실태조사 분석을 통하여 적용 가능한 층간소음 분쟁의 예방을 위한 효율적인 관리시스템을 개발 적용하였다. 설문조사 분석결과, 층간소음의 주요 발생 원인으로 아이들 뛰는 소음과 어른 걷는 소음이 55% ~ 75%로 가장 심각한 소음원으로 나타났으며, 소음 피해시간대는 저녁(18시~22시) 시간대는 50% ~ 65%로 가장 높게 나타났으며, 야간(22시~ 06시) 시간대는 26% ~ 45%범위에 있는 것으로 분석되었다. 층간소음관리시스템 적용 전 후의 민원저감효과 분석결과, 전라도 광주는 100%, 대구시는 87.5%, 서울의 경우는 83%, 경기도는 71% 순으로 나타나, 평균 약 85% 이상의 민원 저감효과가 있는 것으로 나타났다. 층간소음관리시스템 적용 전 후의 아파트 가격 변화 분석결과, 적용된 아파트의 경우는 평균 17.23백만원 상승한 반면, 미적용된 아파트는 0.55백만원 하락한 것으로 평가되었다.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.698-704
• /
• 2022

In this paper, the radiated aerodynamic noise generated from sound sources of a nozzle inflow is quantitatively investigated and compared with experimental results of externally radiated noise. A high-resolution unsteady compressible Large Eddy Simulation (LES) technique is used to accurately predict the internal and external flow of three types of nozzle shape. Through using the vortex sound source for sound sources, the geometry of nozzle neck is identified as most significant aerodynamic noise sources. For validation of quantitative analysis, the vortex sound source intensity of internal nozzle flow is compared with results of external radiated noise of calculation and experiment.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.427-428
• /
• 2014

본 연구의 목적은 170 dB 수준의 충격 소음원에서 주파수별 귀마개의 차음성능을 확인하고, 주파수 특성과 패턴 형상을 분석하는데 있다. 충격 소음에서의 주파수별 귀마개 차음성능을 분석하기 위하여 충격 소음원 분석을 위한 설비를 구축하였다. 차음 성능을 확인하기 위해서 Ear시뮬레이터를 제작하여 차음성능을 검증하였다. 기존의 연구들은 충격 소음원이라 할지라도 대부분 140 dB 수준의 고충격 소음원이였으나, 본 연구는 그보다 더 높은 수준의 충격 소음원이라는 특징을 가지고 있다. 연구결과, 주파수별 충격소음의 차음효과는 평균 30 dB 정도임을 확인할 수 있었으나, 한정된 샘플링으로 인해 통계학적 추 검정 과정을 수행하지 못한 한계점이 있다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.1-3
• /
• 1996

수중 트랜스듀서는 진동하는 물체위에 설치되어 다양한 외부 소음원이 유입되는 환경에 노출되어 있다. 외부 소음원으로는 선체 진동. 프로펠러 소음, 그리고 유동 유기 소음들을 들 수 있고, 트랜스듀서의 실제 작동시 이들의 레벨이 상당히 높아서 센서의 정확한 작동에 장애가 되고 있다. 본 논문에서는 외부 소음원에 무관한 고 정밀, 저 소음 특성을 지닌 음향센서를 개발하기 위하여 유한요소법 (FEN)을 사용하여 소음 전달 특성을 분석하고, air pocket과 음향 감쇠층의 다양한 조합으로 이루어진 구조를 개선한 음향센서의 설계 및 내소음성 평가를 하였다. 또한 사용한 음향 감쇠층의 최적 물성을 제시하고자 한다. 그 결과 센서 측면 하단부에 소음원이 위치할 경우 가장 큰 잡음 신호로 작용하며, 구조를 변경한 결과 기존 음향센서에 비해 55% 이상 내 소음성을 증진 시켰다. 그리고 음향 감쇠층의 최적 음향 임피던슨는 1 Mrayl 이하 혹은 4mrayl 이상으로 분석되었다.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.110-117
• /
• 2016

Passive sonar systems detect and classify the target by analyzing the radiated noises from vessels. If multiple noise sources exist within the sonar detection range, it gets difficult to classify each noise source because mixture of noise sources are observed. To overcome this problem, a beamforming technique is used to separate noise sources spatially though it has various limitations. In this paper, we propose a new method that uses a FDICA (Frequency Domain Independent Component Analysis) to separate noise sources from the mixture. For experiments, each noise source signal was synthesized by considering the features such as machinery tonal components and propeller tonal components. And the results of before and after separation were compared by using LOFAR (Low Frequency Analysis and Recording), DEMON (Detection Envelope Modulation On Noise) analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.268-277
• /
• 2022

In this study, each component of flow noise source of underwater propeller installed to the scale model of the KVLCC2 is investigated and the effect of each noise source on underwater-radiated noise is quantitatively analyzed. The computation domain is set to be the same as the test section of the large cavitation tunnel in the Korea Research Institute of Ship and Ocean Engineering. First, for the high-resolution computation of flow field which is noise source region, the incompressible multiphase Delayed Detached Eddy Simulation is performed. Based on flow simulation results, the Ffowcs Williams and Hawkings integral equation is used to predict underwater-radiated noise and its validity is confirmed through the comparison with the tunnel experiment result. For the quantitative comparison on the contribution of each noise source, the spectral levels of sound pressure and power levels predicted using propeller tip-vortex cavitation, blade surface and rudder surface as the integral region of noise sources are investigated. It is confirmed that the cavitation which is monopole noise source significantly contributed to the underwater-radiated noise than propeller blades and rudder which is dipole noise source, and the rudder have more contribution than propeller blades due to the influence of the propeller wake.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.86-92
• /
• 2001

Various array processing techniques to identify the noise source position or bearing have been developed. Typical array processing techniques which are based on time delay between received signals at two sensors, are classified as conventional beamforming, correlation function and NAH (Near-Field Acoustic Holography) techniques which have their own characteristics with respect to application field and signal processing method. In this study, correlation function technique which could be applied for broadband noise source detection, is adopted and the effective detection technique is proposed considering the effects of source bandwidth and measurement noise correlation of noise sources. The validity of the Proposed technique is evaluated using the 3-dimensional nonlinear any which does not give 3-dimensional Position or bearing ambiguity

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.40-47
• /
• 2014

Interaction between the unsteady flow emitted from the blade of the centrifugal fan and the volute tongue region of fan duct is known as the main noise source of the centrifugal fan. In this paper, the relative contributions of the volute tongue region of the centrifugal fan is analyzed to utilize as the foundation data of low noise design. The internal hybrid CAA (Computational Aero-Acoustics) method is used to predict noise radiated from the main noise source. This method is the noise prediction technique using CFD (Computational Fluid Dynamics), Acoustic analogy, and BEM(Boundary Element Method). The relative contributions of the centrifugal fan volute tongue region using the hybrid CAA method show that the region between the cut-off and the scroll has high contribution than the region between the cut-off and the outlet and the hub region of blade has high contribution than the shroud region of blade. These results is utilized as the important data for the development of low noise centrifugal fan.