• Title/Summary/Keyword: 소수성 상호작용

Search Result 117, Processing Time 0.027 seconds

Effect of Functional Monomer on Retention Factor of Chiral Racemate (기능성 단량체가 키랄 물질의 체류인자에 미치는 영향)

  • Jin, Yin-Zhe;Row, Kyung-Ho
    • KSBB Journal
    • /
    • v.20 no.4
    • /
    • pp.260-265
    • /
    • 2005
  • In this work, molecular imprinted polymers (MIPs) using the template of the N-CBZ (carbobenzyloxy)-L-phenylalanine, MAA and 4-VPY as a monomer, EGDMA as a crosslinker and AIBN as an initiator were considered. The prepared polymer particles $(Ca.\;25-35\;{\mu}m)$ were packed into a chromatographic column $(3.9\;\times\;150\;mm)$. The chromatographic characteristics of the retention on the MIP were experimented with acetonitrile as a mobile phase at the flow rate of mobile phase, 0.5 ml/min. The retention factors and resolutions of chiral racemate of the N-CBZ-D, L-phenylalanine were measured. The results showed that the retention factor and resolution by the two co-monomer imprinting polymer were higher than the single monomer imprinting polymers, which indicated an increase in the affinity of the MIP with the sample as a result of the cooperation effect of the binding sites.

Interactions between Water-Soluble Polyparacyclophanes and Drugs (II) -Interaction between Water-Soluble Polyparacyclophanes and Fluorescent Hydrophobic Naphthalene Derivatives in Aqueous Solution- (수용성 폴리파라시클로판류와 약물과의 상호작용(제 2보) -수용액중 수용성 폴리파라시클로판류와 형광 소수 나프탈렌 유도체류와의 상호 작용-)

  • Chun, In-Koo;Lee, Min-Hwa;Kim, Shin-Keun
    • Journal of Pharmaceutical Investigation
    • /
    • v.18 no.3
    • /
    • pp.113-123
    • /
    • 1988
  • A series of water-soluble polyparacyclophanes bearing two diphenylmethane or two diphenyl ether skeletons were investigated to develop useful host compounds by using 1-anilinonaphthalene-6-sulfonate (ANS) and 2-p-toluidinylnaphthalene-6-sulfonate (TNS) as fluorescent hydrophobic substrates in aqueous solution. It was noteworthy that remarkable fluorescent enhancements and blue shifts of ANS and TNS were observed only in the presence of 1,6,20,25-tetraaza[6.1.6.1] paracyclophane (CPM 44) and 1,6,21,27-tetraaza [7.1.7.1] paracyclophane (CPM 55) for diphenylmethane skeleton, and 1,7,21,27-tetraaza-14,34-dioxa [7.1.7.1] paracyclophane (CPE 55) and 1,8,22,29-tetraaza-15,36-dioxa [8.1.8.1] paracyclophane (CPE 66) for diphenyl ether skeleton, comparing with ${\alpha}-\;and\;{\beta}-cyclodextrins$. However, their acyclic analogues such as 4,4'-dimethylaminodiphenylmethane and 4,4'-dimethylaminodiphenyl ether, and paracyclophanes whose cavities were smaller showed only small effects under the same conditions. These facts suggested that hosts and substrates were in an intimate contact which would not occur without larger structures, and thus that guest molecules were strongly incorporated in the hydrophobic cavities of these larger paracyclophanes. The effects of pH on the fluorescent intensity of ANS-CPM 44, ANS-CPM 55, ANS-CPE 55, ANS-CPE 66, TNS-CPM 44, TNS-CPM 55, TNS-CPE 55 and TNS-CPE 66 systems were not significant below pH 2.0, but their fluorescent intensities were markedly reduced with increasing ionic strength.

  • PDF

Soft-lithography for Manufacturing Microfabricated-Circuit Structure on Plastic Substrate (플라스틱기판 미세회로구조 제조를 위한 소프트 석판 기술의 적용)

  • Park, Min-Jung;Ju, Heong-Kyu;Park, Jin-Won
    • Korean Chemical Engineering Research
    • /
    • v.50 no.5
    • /
    • pp.929-932
    • /
    • 2012
  • Novel platform technology has been developed to replace the photolithography used currently for manufacturing semiconductors and display devices. As a substrate, plastics, especially polycarbonates, have been considered for future application such as flexible display. Other plastics, i.e. polyimide, polyetheretherketon, and polyethersulfone developed for the substrate at this moment, are available for photolithography due to their high glass transition temperature, instead of high price. After thin polystyrene film was coated on the polycarbonate substrate, microstructure of the film was formed with polydimethylsiloxane template over the glass transition temperature of the polystyrene. The surface of the structure was treated with potassium permanganate and octadecyltrimethoxysilane so that the surface became hydrophobic. After this surface treatment, the nanoparticles dispersed in aqueous solution were aligned in the structure followed by evaporation of the DI water. Without the treatment, the nanoparticles were placed on the undesired region of the structure. Therefore, the interfacial interaction was also utilized for the nanoparticle alignment. The surface was analyzed using X-ray photoelectron spectrometer. The evaporation of the solvent occurred after several drops of the solution where the hydrophilic nanoparticles were dispersed. During the evaporation, the alignment was precisely guided by the physical structure and the interfacial interaction. The alignment was applied to the electric device.

Tetrakis(trimethylsilyloxy)silane와 cyclohexane 혼합 전구체를 사용한 플라즈마중합박막에서의 mouse embryonic fibroblast cell과 bovine aortic endothelial cell의 동향

  • Gwon, Seong-Ryul;Ban, Won-Jin;Nam, Jae-Hyeon;Lee, Ye-Ji;Jeong, Dong-Geun;Seo, Yeong-Sik;Park, Hyeon-Yong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.227.2-227.2
    • /
    • 2015
  • 세포를 부착하는 기술은 세포를 배양하기 위한 가장 기초적이며 중요한 기술이다. 세포 부착기술은 대상물과 세포 간의 다양한 생물학적, 물리화학적 연관 관계가 있으나 세포와 부착 대상물 간의 복잡한 상호작용 때문에 완벽히 예측하기는 어렵다. 우리는 이 연구에서 siloxane 성분을 포함하고 있는 전구체인 tetrakis(trimethylsilyloxy)silane과 hydro-carbon을 포함하고 있는 전구체인 cyclohexane을 혼합하여 플라즈마 중합 박막을 만들고 그 박막에서의 mouse embryonic fibroblast cells과 bovine aortic endothelial cell 부착의 정도를 확인하였다. 플라즈마 중합 박막을 제작하기 위해 capacitively coupled plasma chemical vapor deposition system을 사용하였고 carrier gas로는 Ar을 사용하였다. Plasma RF power는 13.56MHz 70W를 사용하였다. Bubbler에서 기화된 전구체를 포함하고 있는 Ar carrier gas가 process chamber에서 혼합되고 두 전구체의 비율을 조절하기 위해 carrier gas를 0 에서 150sccm으로 변화시켜 플라즈마 중합 박막을 제작하였다. 플라즈마 중합 박막의 화학적 조성은 Fourier transform infrared absorption spectroscopy와 X-ray photoelectron spectroscopy를 이용하여 측정하였고, 생물학적 세포 부착 정도는 현미경을 통해 관찰하였다. 또한, 물과 박막의 접촉각(Water contact angle)을 측정함으로써 본 박막과 세포 부착에서의 친, 소수성의 연관성을 확인하였다. Tetrakis(trimethylsilyloxy)silane를 전구체를 사용한 박막에서 세포 부착 억제 표면특성이 관찰되었고, 주입되는 cyclohexane 비율이 늘어날수록 세포부착 가능한 표면 특성을 보였다. 결과적으로, 전구체인 tetrakis(trimethylsilyloxy)silane와 cyclohexane의 비율을 조절함으로써 세포의 부착정도를 제어할 수 있음을 확인하였다.

  • PDF

The Farnesyl Protein Transferase Inhibition Activity of Chalcone Derivatives (Chalcone 유도체의 Farnesyl Protein Transferase 저해활성)

  • Yu, Seong-Jae;Myung, Pyung-Keun;Kwon, Byung-Mok;Lee, Seung-Ho;Sung, Nack-Do
    • Applied Biological Chemistry
    • /
    • v.42 no.3
    • /
    • pp.252-255
    • /
    • 1999
  • Inhibition activities$(pI_{50})$ of chalcone derivatives as substrate with farnesyl protein transferase(FPTase) were determined in vitro. The structure activity relationships(SAR) between the activity and physicochemical parameters of X & Y-substituents on the phenyl groups were analyzed by Free-Wilson and Hansch method. X-substituents on the benzoyl group have the more important role to inhibition activity than Y-substituents on the styryl group. Among them, none substituent, 8 showed the highest FPTase inhibition activity$(pI_{50}=4.30)$. Particularly, the SAR equation could be formulated, showing a parabolic relationship between the activity and hydrophobicity(logP) where the optimal value$({\Sigma}logP)_{opt}$ was 3.915. And also the activity depends on the steric effect(Es > 0) with X-substituent and the resonance effect(R < 0) with electron donating Y-substituents. Based on the results of SAR analyses, the interactions between substrates and receptor, FPTase, could be assumed.

  • PDF

Transport Characteristics of Alcohol Solutes through Copolymer Hydrogel Membranes Containing Poly(2-Hydroxyethylmethacrylate) (Poly(2-Hydroxyethylmethacrylate)를 포함한 공중합체 수화겔막에 대한 알콜용질의 투과특성)

  • Park, Yu Mi;Kim, Eun Sik;Seong, Yong Gil
    • Journal of the Korean Chemical Society
    • /
    • v.34 no.4
    • /
    • pp.377-383
    • /
    • 1990
  • Three kinds of hydrogel membranes were prepared by the copolymerization of 2-hydroxyethylmethacrylate (HEMA) with acrylamide, N, N-dimethylamide and methylmethacrylate in the presence of solvent and crosslinker respectively. The equilibrium water content, relative permeability and partition coefficient of the membranes for alcohol solutes were measured. It has been found that the permeation of organic solute occurs through the water-filled regions in the hydrogel membrane, and that the gpermeability coefficient of organic solute depends on the molecular size. But the permeability of organic solute was controlled by the interaction of solute-membrane at the low water content. By the partition data, it has been shown that the partition of solute is only controlled by hydrophobic interaction between solute and membrane. The diffusion coefficient data were interpreted on the basis of water-solute interaction. It has been found that the diffusion of organic solute is determined by the free volume of water in the membrane, and that hardly depends on polarity-polarizability and hydrogen bonding ability between water and solute.

  • PDF

Aggregation of Partially Quarternized Poly(4-vinylpyridine) with Anionic Surfactant Sodium Dodecvl Sulfate (부분적으로 4차아민화된 폴리(4-비닐피리딘)과 음이온 계면활성제인 도데실 황산 소듐과의 응집체 형성)

  • 김용철;박일현;심후식;최이준
    • Polymer(Korea)
    • /
    • v.28 no.2
    • /
    • pp.154-161
    • /
    • 2004
  • Modified poly(4-vinylpyridine) was obtained by partial quarternization of nitrogen atoms in pyridine rings of poly(4-vinylpyridine) with methyl group. By means of laser light scattering and fluorescence, it was found that this modified polymer chains were aggregated in the aqueous solution and its structure was core-shell type. The hydrophobic parts of the chains were densely condensed in core part and the hydrophilic part of quarternized amino with positive charge formed the shell part. In the mixed system of modified poly(4-vinylpyridine) and anionic surfactant, sodium dodecyl sulfate, it was observed that a critical aggregation concentration existed and that this critical concentration was suddenly decreased above 0.1 M NaCl. The size change of aggregates was also investigated by dynamic light scattering while sodium dodecyl sulfate was added into polymer solution upto the critical aggregation concentration.

Properties of LDPE Composite Films Using Polyurushiol (YPUOH) for Functional Packaging Applications (폴리우루시올(YPUOH)을 이용한 기능성 패키징용 LDPE 복합필름의 특성분석에 관한 연구)

  • Jung, Suyeon;Kim, Dowan;Seo, Jongchul
    • Applied Chemistry for Engineering
    • /
    • v.26 no.1
    • /
    • pp.23-28
    • /
    • 2015
  • Lacquer sap extracted from lacquer trees exhibits good thermal stabilities and antimicrobial properties. To apply these superior properties to functional packaging, polyurushiol (YPUOH) powders were prepared and blended into LDPE (low density polyethylene) to prepare three different LDPE/YPUOH composite films via a twin screw extruder system. Their morphology, thermal and antimicrobial properties as well as barrier properties of the LDPE/YPUOH composite films were thoroughly investigated to find out applicablities of the films as functional packaging materials. Although the interfacial interaction between LDPE and YPUOH was relatively weak, LDPE/YPUOH composite films exhibited good dispersion of YPUOH in LDPE, resulting in the enhanced thermal stability with YPUOH loading. Due to the good antibacterial property of as-prepared YPUOH, LDPE/YUOH composite films also showed an excellent antibacterial activity (R) of 99.9% against E. coli. Furthermore, the moisture barrier property of LDPE/YPUOH composite films increased with increasing YPUOH contents. Incorporating the relatively low amount of YPUOH in LDPE resulted in the apparent enhancement in thermal stabilities, antibacterial and moisture barrier properties, which made them promising candidates as a functional filler for packaging materials.

Isolation and Partial Physicochemical Characterization of Bile Acid-Binding Fraction from Rice Bran Protein Hydrolysates (미강 단백질 가수분해물에서 담즙산 결합 획분의 분리 및 특성구명)

  • Cho, Wan-Il;Moon, Tae-Wha
    • Korean Journal of Food Science and Technology
    • /
    • v.29 no.3
    • /
    • pp.417-426
    • /
    • 1997
  • Rice bran protein hydrolysates were prepared and some of their physicochemical properties were investigated to utilize rice bran as starting material for functional food ingredient. Rice bran proteins (RBP) were prepared from defatted rice bran by alkaline extraction and isoelectric precipitation. The enzyme for hydrolysis of RBP was selected through measuring relative activity by pH-drop method and comparing the degree of hydrolysis (DH) of hydrolysates. The enzymatic hydrolysates prepared by $Esperase^{\circledR}$ treatment were partitioned into two fractions by ultrafiltration(UF) with a 10 kDa molecular weight cut-off membrane. Each fraction was applied to a cholic acid-conjugated ${\omega}-aminohexyl$ Sepharose 4B column and the bile acid-binding components were obtained by eluting with deoxycholate. Gel permeation chromatography on a Sephadex G-50 column revealed that molecular weight of the bile acid-binding fraction of UF permeate was distributed in ranges of $2\;kDa{\sim}10\;kDa$ and $0.2\;kDa{\sim}0.6\;kDa$. Three peaks (R-1, R-2 and R-3) were obtained by prep-HPLC of bile acid-binding fraction of UF retentate and analyzed for total and free amino acid composition. The results showed that proline content of the bile-acid binding polypeptides and peptides was four times as much as that of rice bran protein and that the peak corresponding to higher average hydrophobicity had a higher free amino acid content. Average hydrophobicity slightly increased with enzymatic hydrolysis.

  • PDF

A study on context of children's library considering user behavior (아동의 독서 및 놀이 행태를 반영한 어린이 도서관 CONTEXT 분석 (아동의 가구 사용방법(Way of Seat)과 아동-부모의 상호작용방법을 중심으로))

  • Song, So-Ra;Pan, Young-Hwan;Jeong, Ji-Hong
    • 한국HCI학회:학술대회논문집
    • /
    • 2009.02a
    • /
    • pp.901-906
    • /
    • 2009
  • 어린이 도서관은 일상생활 가까이에서 지역주민에게 지식정보 서비스를 제공할 뿐 아니라 공공도서관과의 연계를 통해 우리나라 전체 도서관 서비스의 수준을 발전시키고자 하는 생활 친화적 문화기반 시설인 소규모 도서관(혹은 문고)시설이다. 즉 어린이 도서관은 접근성을 가장 큰 장점으로 하여 누구나 쉽고 편리하게 이용할 수 있는 고객중심의 공공도서관 서비스라고 할 수 있다. 어린이 도서관의 주 이용고객은 어린이와 주부로서 최근 이들이 함께 도서관을 이용하는 빈도가 증가하면서 어린이 도서관은 단순히 책을 빌리고 공부를 하는 장소에서 나아가 가족단위의 여가활동이 가능한 문화적 공간으로 변모하여가고 있다. 어린이 도서관은 기본적으로 책을 읽는 조용한 공간이지만 주 이용자가 6세 미만의 유아와 초등학교 저학년 어린이이기에 독서행위와 더불어 또래 친구들과의 친교행위. 부모님과의 정서적 유대감 형성행위, 소규모 근육활동과 같은 놀이행위가 병행된다. 또 어린이 도서관에서 사용되어지는 정형적인 모듈의 서가를 비롯한 입식. 좌식 테이블과 의자들은 소수의 디자이너에 의해 만들어진 것이지만 그것을 이용하는 다수의 어린이들은 디자이너의 의도와 방법에 따라 가구를 사용하는 것 외에도 환경적 컨텍스트에 맞추어 가구의 새로운 쓰임을 발견하며 훨씬 더 다채로운 방법으로 가구를 사용하고 있다. 따라서 본 연구의 목적은 독서 및 놀이 행위 시 아동-부모의 상호작용 방법에 기반하여 아동의 가구사용방법(Way of Seat)을 알아보고 이를 바탕으로 어린이의 행태정보를 모델링하여 가구를 사용하는 어린이의 다양한 행위 이면에 내재된 요구를 파악하는데 있다. 가구를 사용하는 어린이의 다양한 행태 이면에 내재한 어린이만의 특성과 요구를 알아보기 위해서는 먼저 어린이 도서관이라는 특수한 물리적 환경요인 및 사용자 컨텍스트(Context)에 대한 이해가 선행되어야 한다. 이를 위해 기반조사 및 어린이 도서관 방문을 통한 정황조사(Contextual Inquiry)를 실시하였다. 이를 통해 6세 미만의 유아와 초등학생의 가구사용방법(Way of Seat)과 독서 및 놀이 행위 시 행태를 관찰하여 Photo Based Research를 바탕으로 어린이의 행태정보를 모델링 하였다.

  • PDF