• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1295-1304
• /
• 2010

This paper proposes a fault-tolerant data aggregation which provides energy efficient and reliable data collection in wireless sensor networks. The traditional aggregation scheme does not provide the countermeasure to packet loss or the countermeasure scheme requires a large amount of energy. The proposed scheme applies caching and re-transmission based on the track topology to the adaptive timeout scheduling. The proposed scheme uses a single-path routing based on the traditional tree topology at normal, which reduces the dissipated energy in sensor nodes without any countermeasure against packet loss. The proposed scheme, however, retransmits the lost packet using track topology under event occurrences in order to fulfill more accurate data aggregation. Extensive simulation work under various workloads has revealed that the proposed scheme decrease by 8% in terms of the dissipated energy and enhances data accuracy 41% when the potential of event occurrence exists as compared with TAG data aggregation. And the proposed scheme decrease by 53% in terms of the dissipated energy and shows a similar performance in data accuracy when the potential of event occurrence exists as compared with PERLA data aggregation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2B
• /
• pp.151-161
• /
• 2009

The PULSE protocol can greatly reduce power consumption using a node's sleep state. But this protocol does not consider movement of a sink node in a sensor network. In the mobile sensor network a routing protocol must recover path error by movement of a sink node as quickly as possible. Therefore we have to achieve fast path recovery and power saving to support movement of a sink node in a sensor network. This paper proposes the Mobile PULSE protocol which is a improved routing protocol for a mobile sink node. And we evaluate Mobile PULSE and show that the Mobile PULSE reduces the recovery time about 40% compared with original PULSE protocol. Mobile PULSE increases energy consumption than PULSE as a maximum of 0.8%, which means Mobile PULSE is similar to PULSE in energy consumption. This paper shows mobile PULSE's capability in the mobile sensor network through evaluation of path recovery time and power consumption.

• Journal of Industrial Convergence
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2020

Industrial IoT has much interested in wireless mesh networks (WMNs) due to cost effectiveness and coverage. According to the advance in caching technology, WMNs have been researched to overcome the throughput degradation of multihop environment. However, there is few researches of cache power consumption models for WMNs. In particular, a wired line based cache power consumption model in content-centric networks is not still proper to WMNs. In this paper, we split the amount of cache power from the idle power consumption of CPU, and then the cache hit ratio proportional power consumption model (CHR-model) is proposed. The proposed CHR-model provides more accurate power consumption in WMNs, compared with the conventional cache power efficiency based consumption model (CPE-model). The proposed CHR-model can provide a reference model to improve energy-efficient cache operation for Industrial IoT.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.122-129
• /
• 2014

Due to remarkable market growth of smart devices, higher performance and more functionalities are required for a core system-on-chip (SoC), and thus the power demand is rapidly increasing. However, aggressive shrink of CMOS transistor have brought severe process variations thereby adversely affected the performance and power consumption under strict power constraint. Voltage binning (VB) scheme is one of the effective post silicon tuning techniques, which can reduce parametric yield loss due to process variations by adjusting supply voltage. In this paper, an optimal supply voltage tuning based voltage binning technique is proposed to reduce average power without an additional yield loss. Considering the different LVCC margins of process corners along with speed and leakage characteristics, the proposed method can optimize the deviation of voltage margin and thus save power consumption. When applying on a 30nm mobile SoC product, the experimental results showed that the proposed technique reduced average power consumption up to 6.8% compared to traditional voltage binning under the same conditions.

• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.471-481
• /
• 2008

Test scheduling considering power dissipation is an effective technique to reduce the testing time of complex SoCs and to enhance fault coverage under limitation of allowed maximum power dissipation. In this paper, a modeling technique of test resources and a test scheduling algorithm for efficient test procedures are proposed and confirmed. For test resources modeling, two methods are described. One is to use the maximum point and next maximum point of power dissipation in test resources, the other one is to model test resources by partitioning of them. A novel heuristic test scheduling algorithm, using the extended-tree-growing-graph for generation of maximum embedded cores usable simultaneously by using relations between test resources and cores and power-dissipation-changing-graph for power optimization, is presented and compared with conventional algorithms to verify its efficiency.

• Plant Journal
• /
• v.15 no.3
• /
• pp.23-28
• /
• 2019

In this study, ammonia consumption by gas turbine output was adjusted to find out the amount of ammonia consumption that complies with the enhanced Air Quality Preservation Act and internal regulation emission standards in SCR type DeNOx System for a 580 MW Sejong Combined Cycle Power Plant. For measurements, the gas turbine output was varied to 50, 99, 149, 198 MW and ammonia consumption was adjusted with the combustion gas and ammonia supply conditions fixed at each stage. When the emission limit were change from 10 ppm to 8 ppm, ammonia consumption was increased from 78, 93, 105, 133 kg/h to 89, 113, 132, 176 kg/h. The increase rate of ammonia consumption was 14, 22, 26, 32% per output category compared to the 10 ppm emission limit, which was shown to increase as output increased.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.4
• /
• pp.89-102
• /
• 2015

The purpose of this paper is to attempt to investigate how emotional labor strategies (i.e. surface acting and deep acting) affect job performance and turnover intention thorough emotional exhaustion. Another important objective of this study was to see whether perceived organizational support (POS) moderates the relationship between emotional labor strategies and emotional exhaustion. Structural equation modeling analysis provided support for the hypotheses from a sample of 225 China department store sales employees. The results revealed that surface acting has a positive influence on emotional exhaustion, whereas deep acting has not significant influence on emotional exhaustion. Second, emotional exhaustion has a negative influence on job performance, whereas it has a positive influence on turnover intention. In addition, the relationship between surface acting and job performance/turnover intention was significantly mediated by emotional exhaustion. Furthermore, perceived organizational supporting mitigated the negative relationship between deep acting and emotional exhaustion. The findings of this study contributed to the literature by identifying the relationship between surface and deep acting on employee outcomes (i.e. emotional exhaustion, job performance, turnover intention), especially in China. In addition, this study also confirmed the important buffering role of POS based on the norm of reciprocity between an organization and its members.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.143-143
• /
• 1999

Co/Ti 다층 박막을 제조하기 위해 직류원 마그네트론 스퍼터링 시스템을 이용하여 (100)실리콘 단결정 기판위에 Co와 Ti층을 각각 2/2, 5/5, 10/10 nm 정도의 두께로 조절하여 세가지 조성의 Co/Ti 다층 박막을 제조하였다. 이러한 Co/Ti 다층 박막의 후속 열처리는 Ar 가스분위기 하에서 Tube furnace를 이용하여 20$0^{\circ}C$와 30$0^{\circ}C$, 40$0^{\circ}C$의 온도에서 진행하였다. 증착초기에서부터 후속 열처리 공정을 진행하는 동안, Co/Ti 다층 박막에서의 계면반응을 미세 구조 변화 및 전기, 자기적 특성변화와 연관지어 관찰하였다. Co/Ti 다층 박막의 결정 구조와 미세 구조 변화를 관찰하기 위해 각각 X-선 회절기와 투과 전자 현미경을 사용하였고, 다층 박막의 전기적, 자기적 특성 변화를 관찰하기 위해 각각 4점 탐침기, 진동 시료형 자속계를 이용하였다. Co/Ti 다층 박막을 20$0^{\circ}C$의 저온에서 열처리를 한 경우에는 증착 초기의 계면반응에 의해 형성된 비정질 층이 성장하였고, 30$0^{\circ}C$와 40$0^{\circ}C$의 고온에서 열처리를 하는 경우에는 비정질 측의 성장보다는 새로운 화합물 CoTi 결정상이 형성되면서 비정질상은 오히려 감소하였다. 즉, Co/Ti 다층 박막의 계면 반응은 결정질 Co와 Ti을 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응이 활발히 일어났다. 특히, 소모된 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응일 활발히 일어났다. 특히, 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응일 활발히 일어났다. 특히, 소모된 계면 반응물 Co와 Ti 중에서 Ti의 소모속도가 더 빠르게 관찰되었다. 이로부터 Ti 이 증착초기에서 저온 열처리 과정동안 Co/Ti 다층 박막의 계면에서 일어나는 비정질화 반응의 주 확산자로 작용했다는 것을 알 수 있다. 한편, 30$0^{\circ}C$와 40$0^{\circ}C$의 고온에서 열처리한 Co/Ti 다층 박막의 계면 반응은, 비정질 반응에 의한 비정질층의 형성보다는 새로운 화합물 결정질 CoTi상을 형성시키는 결정화 반응이 우세했다. Co/Ti 다층 박막의 전기적 저항은, 열처리에 의한 비정질 층의 생성 및 성장으로 인해 증가하였고 새로운 저저항 CoTi 결정상의 형성으로 인해 감소하는 것을 알 수 있었다. 또한 Co/Ti 다층 박막의 포화 자화값은, 열처리에 의한 계면에서의 비정질화 반응과 CoTi 결정화 반응으로 인해 강자성체인 Co 결정상이 감소됨에 따라 감소하는 경향을 나타냈다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.459-459
• /
• 2017

본 연구에서는 순물소모량 개념의 농업용수 수요량 추정방법을 적용하여 기후변화에 따른 제주도의 미래 수요량 변화를 추정 분석하였다. 지하수를 주 수원으로 하고 관정에 의한 밭작물 위주의 작물재배와, 일정 규모 이상의 강우시에만 유출이 발생하며, 유출량의 대부분이 지하수로 침투되는 물순환 특성 등을 고려할 수 있는 제주도 지역에 적합한 순물소모량 산정방법을 적용하였다. 순물소모량 산정에 필요한 실제증발산량 및 잠재증발산량 등은 유역모형인 SWAT을 이용하여 산정하였다. SWAT 모형의 구동에 필요한 미래 기후자료는 10개의 대표적인 대순환모델(General Circulation Model, GCM) 결과로부터 상세화(Downscaling) 기법을 통해 적용하였으며, RCP 4.5와 RCP 8.5 시나리오를 중심으로 미래 기후변화에 따른 영향을 분석하였다. 미래(2010-2099)의 수문성분별 변화를 살펴본 결과, 연도별 증감과 GCM 모델별 차이는 있으나, 평균적으로 강수량, 잠재증발산량, 실제증발산량, 함양량 등이 점차 증가하는 것으로 나타났으며, RCP 4.5보다는 RCP 8.5 시나리오에서 증가현상이 좀 더 크게 나타났다. 순물소모량 또한 2010년에 비해 2099년을 기준으로 약 100~200mm 정도 증가하는 것으로 나타났으며, RCP 8.5 시나리오에서 증가폭이 크게 나타났다. 그러나 이는 자연적인 기후변화에 따른 단위면적당 순물소모량으로서, 인위적인 요인인 농업형태의 변화(관개면적의 증감, 작물품종의 변화, 인위적 용수절감 등)에 따라 실제 지역별 농업용수 수요량은 다른 경향을 나타낼 수도 있다. 특히 농업용수는 계절별, 지역별 편차가 크게 나타나므로, 자연적 조건에 의한 가용수자원량과 지역별 공급시설에 의한 용수공급량 및 수요예측량의 상호분석을 통해 안정적 물수급을 위한 대응책 마련이 필요할 것으로 판단된다.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.315-319
• /
• 2008

We investigate theoretically the power consumption of a notch filter using a thermo-optic long-period grating, which is induced by a heater array consisting of periodic heaters and pads made of metal thin-film. Since the power consumed by the heater array is converted to joule heat that generates the thermo-optic long-period grating, the characteristics of the notch filter are dynamically controlled by adjusting it. The power necessary for appropriate coupling efficiency depends on the parameters of the heater array, which are the width and length of a heater, pad width, and the thickness of the thin-film. We explain an approximate method of analyzing the influence of the parameters on the consumed power. Using the analysis method, we simulate the change of the power depending on the parameters. From the simulation, we suggest a few guidelines on the parameters required to reduce the power.