• 한국콘텐츠학회논문지
• /
• 제13권7호
• /
• pp.131-140
• /
• 2013

여성복에 있어서 09/10년 시즌에 가장 주목할 만한 특징은 파워 숄더 룩이다. 파워 숄더 룩은 단순히 패션니스타들에서만이 아니라 당당히 스트리트 패션의 하나로 자리 잡았으며 파워 숄더 룩의 50%이상을 차지하는 재킷이 여성복의 핵심 아이템의 하나로 부활하면서 재킷의 어깨 각도는 0도에서 30도 이상까지 다양하게 나타난다. 다양한 어깨 각도 중 10도, 15도, 20도의 형태가 70%이상을 차지하고 있으며 패턴의 형태는 몸판의 어깨선을 자연스럽게 올리고 확장한 어깨변형 패턴, 어깨선과 함께 소매산 부분을 절개한 소매산 변형 패턴, 몸판과 소매가 연결된 패턴이 주를 이루고 있다. 파워 숄더 패턴 전개는 어깨 각도가 높아질수록 각이 시작되는 점이 목옆점에 가깝게 하고 어깨끝점이 확장되어야 소매의 외관형태가 편안하고 피트성이 좋아진다. 어깨 변형의 경우 앞뒤 진동선의 시작점인 어깨점과 소매산의 정점 부분의 선이 완만하게 이어지도록 S라인형태를 유지하는 것이 가장 중요하며 소매산의 ease분량이 일반 재킷 소매보다 많아야 파워 숄더 실루엣이 자연스럽게 연출된다. 소매변형 패턴은 중심쪽 소매의 소매산 높이는 기본소매 소매산높이의 1.5cm를 외곽 소매분량으로 처리한 것을 고려하여 소매산 높이를 설정하고 어깨 각이 커질수록 외곽소매의 소매산 폭을 크게 함으로서 소매의 어깨점이 목옆점 방향으로 휘지 않고 각이 선 파워 숄더가 완성된다. 소매변형과 소매와 몸판연결 패턴의 경우 어깨점과 상완이 연결되는 부분에 충분한 여유가 필요하며 어깨각도도 다른 형태에 비해 상대적으로 낮아 보인다. 이와 같이 파워 숄더 재킷 패턴은 패턴 제작시 디자인적인 요소를 충분히 감안한 패턴 설계와 함께 소매의 달림선 위치, 어깨너비, 어개 높이 확장량, 소매통의 여유량 등을 고려하여 제작하는 것이 바람직하다.

• Animal Systematics, Evolution and Diversity
• /
• 제2권1호
• /
• pp.37-42
• /
• 1986

한국산 날개응애류에 3 신종과 1 신아종을 기재하였다. 그들은 지게털소매응애, 굽은지게 소매응애, 긴털오징어응애, 준수세발통응애이다.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1181-1189
• /
• 2009

This research analyzes the relationship between the height of the sleeve cap and the mobility of arm movement. Ten Korean women participated as subjects. For test clothes, the AH/4+3, AH/4+1, and AH/4-1 height of the sleeve cap were varied. The sleeve circumference was adjusted according to the variation of the height of the sleeve cap. To analyze test clothing objectively, the range-of-motion of two selected movements (Arm Adduction/Abduction and Arm Flexion/Extension) was measured by Leighton flexometer and goniometer. Also, a wearer acceptability rating was examined for acceptance by the subject. Anova and Duncan's multiple range tests are used for statistical analysis. According to the results, the mobility of test clothing 2 and 3 improved 14.9% and 27.7% in Arm Adduction/Abduction, and 12.7% and 31.9% in Arm Flexion/Extension compared to the test clothing 1.

• 대한가정학회지
• /
• 제24권2호
• /
• pp.1-11
• /
• 1986

The subject, in the blouses that sleeve caps and sleeve lengthes are different from, did sensory test by right arm movement and both arms movement. This sensory test which is used in fabric good, is Shef's. RESULTS : 1) The ease of bust size is very significant by cap height, at 5%, 1% level by sleeve length. 2) The front area of arm hole is affected by cap height, sleeve length movements more than the back and the under area of arm hole are 3) Sleeve width is affected by cap height, sleeve length both arms movement. That is, they should be designed according to the use because they affect the ease of blouse very much. Especially bust size should be considered with sleeve pattern because the ease bust becomes different with sleeve pattern.

• 복식문화연구
• /
• 제14권3호
• /
• pp.404-417
• /
• 2006

The purpose of this thesis, therefore, is to examine the shaping methods and the knitting drafts of sleeve cap in the knitwears which are currently used by the manufacturers; to study the curve forms of sleeves in knitwears by analyzing synthetically the results of investigating the problems of knit wear sleeves; to present the most suitable sleeve cap for the knitwears. As the studying methods, I collected the basic data from the working-level persons of knit wear manufacturers, examined the knitting draft in the knitwears, and from that, made three kinds of comparative experimental garments and one kind of research experimental one as 10G and 16G. In doing so, I showed the sleeve cap suitable for the knitwears with plain stitch after operating sensual evaluation with Liker's 5-point rating measure. The analysis of data was handled with statistics by using SPSS Ver. 12.0; the method of statistics was executed by Frequency Analysis, Trust Analysis, one-way ANOVA, and Duncan test according to each topic of the research. As the result of the sensual evaluation of the experimental garments produced from the study, the research experimental garment looks better than the comparative experimental one in both 10G and l6G; has less extra folds around the front part of sleeve cap; looks more natural in sleeve caps of the body part and of a sleeve. From this, I am able to figure out that the research experimental garment looks better than the comparative experimental one produced by knit wear manufacturers. In addition, I can come to know that the different knitting of the front line and the back one of armhole in the knitwears has a favorable impact on improving the appearance of a sleeve.

• KAPE누리
• /
• 통권132호
• /
• pp.4-5
• /
• 2007

수입산쇠고기의 종류가 늘어나면서 국내산쇠고기와의 등급 비교에 대한 궁금증이 커지고 있다. 외국에서는 등급이 주로 유통단계까지 반영되는 반면에 우리나라에서는 소매단계까지 적용되고 있다. 본 정보지에서는 주요 국가별 소 등급판정에 대한 전반적인 표기방법을 살펴보고자 한다.

• 한국의상디자인학회지
• /
• 제19권4호
• /
• pp.123-137
• /
• 2017

The purpose of this study is to suggest sleeve cap height with a satisfying wearing sensation and appearance on jackets for women in their twenties so that high-consumer demand jackets can be produced. Five experimental jackets with sleeve cap heights of [(AH/3)-1cm], [(AH/3)-0.5cm], [AH/3], [(AH/3)+0.5cm] and [(AH/3)+0.8cm] were made for 30 subjects to try on after which the subjects were then surveyed for their assessment of appearance, wearing sensation and preference. On the basis of the results, the optimum height of the sleeve cap has been proposed along with the following contents and results of this research. 1. [AH/3] [(AH/3)+0.8cm] of sleeve cap height was assessed to beof desirable appearance. 2. [AH/3] of sleeve cap height garnered a high opinion in terms of intuitive wearing sensation, while [(AH/3)-1cm] [AH/3] were the heights with overall satisfaction of intuitive and movement wearing sensations. If discomfort in the upper sleeve at 'straight arm' posture can be tolerated, the sleeve cap height can be set to [(AH/3)-1cm]~[(AH/3)+0.5cm]. 3. [AH/3] and [(AH/3)+0.5cm] were found to have a high preference among wearers, which indicated that the women in their twenties prefer a slim type of sleeve, putting appearance above wearing sensation. Consequently, [AH/3] is desirable when appearance, wearing sensation and preference are considered, [(AH/3)+0.5cm] is fit for business uniform for static duties or formal dress focused on aesthetic impression and [(AH/3)-1cm]~[AH/3] are desirable for work clothes when considering active duties.

• 복식문화연구
• /
• 제17권6호
• /
• pp.992-1008
• /
• 2009

This study is to present a female high school summer blouse with high movement functionality and satisfying appearance. For the experimental research 6 subjects with closest average body shapes and their body surface was measured at beginning and after selecting a representative movement the tested uniform was worn and the appearance and movement functionality was evaluated. The results of this research are as follows. In the research with the aims to improve the sleeve designed the height in 3 types as A.H/4+3, A.H/4+2, A.H/4+1 and their evaluation showed that in the order of best appearance was A.H/4+2, A.H/4+1, A.H/4+3. In the order of best comfort was A.H/4+2, A.H/4+3, A.H/4+1 and the best order for movement functionality was A.H/4+1, A.H/4+2, A.H/4+3. Additional height types designed produced from elastic materials were A.H/4+3, A.H/4+2, A.H/4+1 and the resulting order of appearance was A.H/4+3, A.H/4+2, A.H/4+1, order of comfort was A.H/4+3, A.H/4+2, A.H/4+1 and the order of movement functionality was A.H/4+1, A.H/4+2, A.H/4+3. Integrating these results shows that in using the same concurrent materials, the experiment pattern of setting the sleeve height as A.H/4+2 was the best while in using elastic materials, the experiment pattern of setting the sleeve height as A.H/4+3 was the best.

• 한국의류산업학회지
• /
• 제4권3호
• /
• pp.229-234
• /
• 2002

An investigation was made of the angle of bias on the lower part of the armhole line of the back bodice and that on the lower part of the sleeve cap curve line by cap heights, and then it was made of the lock stitch seam strength and elongation on the matching angles, the stitch density (26 stitches/3cm, 19 stitches/3cm, 14 stitches/3cm, and the samples (a cotton fabric and two kinds of cotton mixed polyester fabric). The matching angles of the machine-sewed samples are $30^{\circ}/-30^{\circ}$, $30^{\circ}/-45^{\circ}$, $45^{\circ}/-45^{\circ}$ and $60^{\circ}/-60^{\circ}$ by the analysis of the angles of bias on the lower part of the armhole seam. In view of the results of the seam strength and elongation, the reasonable sewing condition of the lower part of the armhole seam was 19 stitches/3cm.

• 한국의류학회지
• /
• 제26권11호
• /
• pp.1502-1513
• /
• 2002

The purpose of this study was to find relations between construction factors and adaptability on the 5 available raglan sleeve patterns through the drafting method. Also it was to suggest a functional sleeve pattern according to appearance and adaptability test. Three women in her twenties who have standard figure was selected as subjects. Raglan sleeves of 5 experimental clothes were rated by the appearance test and adaptability test. The major conclusions of this study are as follows. 1. The construction factors of the raglan sleeve are sleeve slant, sleeve cap height, biceps line, breast width. Bicep lines increased and sleeve cap height decreased as the sleeve slant decreased. The higher adaptability scores of raglan sleeves were, the lower sleeve slants were. 2. According to the appearance evaluation, B type was recorded the highest score 3. According to the adaptability scores, A type was recorded the highest score. In the pulled length of the waist-line, A type was the lowest movements among the pattern type. In the pulled length of the sleeve-line, A type was the lowest movements among the pattern types. Therefore A type was evaluated by the bort functional sleeve pattern type. Through the experiments, it was known that appearance and adaptability of the raglan sleeve patterns were effected by construction factor.