• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1180-1183
• /
• 2011

In this paper, we present a design of AEM radome with frequency selective surface using unit-cell EM simulation method and verified the performance of AEM radome by the radiation pattern measurements of $16{\times}16$ array-antenna. Measured results under near-field condition showed a good agreement with the simulation and far-field measured ones. And there were no radiation pattern variation between antenna only and antenna with AEM radome. From these results, we verified that AEM radome with frequency selective surface can be a solution to reduce the RCS of conventional mast and radar.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.92.2-92.2
• /
• 2015

Negative-AND (NAND) flash의 대용량 및 소형화로 인해 10 nm급 공정을 도입한 128 Gb NAND flash가 개발된 이래, 공정이 미세화되면서 셀이 작이지고 간격이 좁아지게 되었다. 이로 인해 전자가 누설되는 간섭현상이 심화되게 된다. 이러한 문제를 해결하기 위해 기존 NAND의 평면 구조를 수직으로 적층하는 3D NAND 기술이 개발되었으며 차세대 소자를 위한 필수 기술로 각광받고 있다. 3D NAND에서 channel hole etching시 고 선택 비의 중요도가 증가하여 증착막 보호 역할을 하는 hardmask의 두께가 증가하게 되었으며 기존 하드마스크 대비 내식각성이 2배 이상 향상된 hard material 개발이 필요한 실정이다. 본 연구에서는 dopant에 따른 amorphous carbon layer (ACL)의 etch rate의 변화량을 Raman spectroscopy등의 측정장비를 이용하여 비교분석 하였다. dopant의 각각 유량별에 대한 etch rate 변화의 영향성을 비교하였다. dopant의 유량에 따라 etch rate이 변화하는 것을 관찰할 수 있었으며, 2000 sccm 이후에는 etch rate이 급격히 감소하는 경향을 보였다. Raman 측정결과, etch rate의 감소에 따라 G-peak의 red shift가 발생하였으며 두 peak 간의 차이 값이 etch rate의 변화율과 유사한 경향을 보이는 것을 확인하였다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.63-68
• /
• 2015

We consider a cell edge environment. In cell edge, a user interfered by signal which is generated by a base stations not including the user. In cell edge environment, that is, there are inter cell interference (ICI) as well as multi user interference (MUI). Coordinated multi-point transmission (CoMP) is a technique which mitigates ICI between base stations. In CoMP, therefore, base stations can coordinate with each other by sharing user state information (CSI) in order to mitigate ICI. To improve sum rate performance in CoMP, each base station should generate optimal user group and transmit data to users selected in the optimal user group. In this paper, we propose a user selection algorithm in CoMP. The proposed method use signal to interference plus noise ratio (SINR) as criterion of selecting users. Because base station can't measure accurate SINR of users, in this paper, we estimate SINR equation considering ICI as well as MUI. Also, we propose a user selection algorithm based on the estimated SINR. Through MATAL simulation, we verify that the proposed method improves the system sum rate by an average of 1.5 ~ 3 bps/Hz compared to the conventional method.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.414-427
• /
• 2011

The Means-end theory has successfully been applied in academics circles and is one of the qualitative methodologies, aiming at classifying into groups based on the specific values that they pursue. The more specific purposes of this study is to identify the relationship between the levels of abstraction and HVM(Hierarchical Value Map) and to identify the statistical changes in frequency activated cell and ladders among A-C-V. And lastly, to suggest the HVM according to the levels of abstraction. The subjects of this study includes the 100 hikers who joined the hiking at least once a year for 2007. The results of analysis show that as the level of abstraction goes up, the HVM itself is depicted more simple and the loss of information is also occurred. Consequently, the decision of levels of abstraction is should be made on the basis of objective validity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1046-1055
• /
• 1994

In this paper, to design high speed 1 line VRAM(Video RAM) suitable for image signal processing with ASIC(Application Specific IC) method, the VRAM memory core has been designed using 3-TR dual-port dynamic cell which has excellent access time and integration characteristics. High speed pipeline operation was attained by separating the first row from the subarray 1 memory core and the simultaneous I/Q operation for a selected single address was made possible by adopting data-latch scheme. Peripheral circuits were designed implementing address selector and 1/2V voltage generator. Integrated ASIC has been optimized using 1.5[ m] CMOS design rule.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1273-1279
• /
• 2006

In this paper, we address the design of adaptive handover schemes based on the signal strength measurement for cellular communications systems. Conventional handover algorithms, which are based only on the downlink measurement, cannot guarantee the required uplink quality because uplink channel can differ greatly from downlink channel quality. Therefore, we proposes a new suboptimal adaptive handover algorithm that considers both the uplink and downlink channel quality in order to achieve the best cell selection gains when there is a wide difference between the uplink and downlink signal quality. Simulation results show that the proposed scheme achieves better performance compared to conventional handover schemes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.7
• /
• pp.44-51
• /
• 2010

This paper proposes the architecture of high-performance Viterbi decoder circuit. The proposed circuit does not require additional memory to calculate the branch metrics because it uses the characteristics of the branch data. The speed of the Viterbi decoder circuit is increased up to 75% by rearranging the path metric data in SRAM and registers properly for fast add-compare-select operations. We described the proposed Viterbi decoder circuit in Verilog HDL and synthesized the gate-level circuit using 130nm standard cell library. The synthesized circuit consists of 8,858 gates and its maximum operating frequency is 130MHz.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.167-173
• /
• 1998

An electrothermal vaporization-hollow cathode glow discharge-atomic emission spectrometer(ETV-HCGD-AES) has been developed for detecting heavy metals in human serum and urine samples. Fisrt of all, we designed a glow discharge cell for atomic emission spectrometry and its analytical performance was studied with the standard reference materials(SRMs) purchased from the NIST. Practically, the ETV-HCGD-AES demonstrated better instrumental sensitivity and selectivity for detecting Hg and Pb in the SRMs, serum and urine, than ICP-OES since the ETV-HCGD-AES was not required the complicate sample digestion procedure, which improved sample transportation efficiency.

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.422-425
• /
• 2006

Due to their periodic helical structure, cholesteric liquid crystals (CLC) have a unique ability to selectively reflect visible light. CLC films reflecting a broad wavelength band were prepared by inducing a pitch gradient in CLC layers through a diffusion of small molecules and through a thermal mixing of cyclic siloxane CLC molecules with different pitch lengths. Various pitch gradients in the CLC cell were observed using UV/Vis spectrometer and SEM technique.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.131-137
• /
• 2009

This presents the equivalent circuit model of solar cell with irradiation and temperature condition. Based on solar cell model, the photovoltaic module specification of manufacturer compare with photovoltaic module simulation and is investigated by simulation results. The obtained results indicate that residual of simulation value and specification value about photovoltaic module is lower. There is considerable validity in simulation of photovoltaic module. Thus, the optimum simulation of photovoltaic module array are studied in this paper. This paper propose the sizing optimization of photovoltaic module array for stand-alone photovoltaic system. Also, the proposed stand-alone photovoltaic system is setting in special region(in seoul). This paper presents simulation characteristic of optimization output power in seoul.