• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.79-80
• /
• 2015

멀티레벨 인버터에 널리 사용되는 Phase Shifted PWM은 셀 간의 동일한 전력 분배가 가능하나 각 셀 carrier의 위상차이로 인해 무부하 운전시 특정 셀에 회생이 발생하고, 지령 전압과 실제 전압의 위상차가 발생하는 단점이 있다. Level Shifted PWM을 통해 이와 같은 단점을 보완할 수 있으나, 각 셀의 스위칭 패턴이 모두 달라 전력 분배가 동일하게 이루어 지지 않는 문제가 있다. 본 논문에서는 기존의 Level Shifted PWM 방법을 개선하여 각 셀의 스위칭 패턴을 순환시켜 셀 간 동일한 전력분배가 이루어지도록 하였고, 시뮬레이션을 통해 이를 검증하였다.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.301-308
• /
• 2003

In this paper, we propose a multicast ATM switch that reduces traffic load by using the method of storing unicast cells and multicast cells separately according to the type of the cells. The switch is based on a shared memory type to reduce HOL blocking and deadlock. In the proposed switch, we use a control scheme that schedules stored cells to output ports to reduce the loss of traffic cells and to output effectively. We analyzed the Performance of the proposed switch through the computer simulation and the results have shown the effectiveness of the switch.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.254-256
• /
• 2019

본 논문은 파워셀 구조를 기반으로 설계된 양극성 펄스 전원장치에 대하여 소개한다. 파워셀은 풀브릿지 구조를 기반으로 설계되었으며, 833V를 출력하는 각 셀이 직렬로 연결되어 고전압을 생성하는 구조를 갖는다. 모든 파워셀의 방전 스위치를 구동하기 위해서 절연된 전력과 신호의 동시공급이 가능한 게이트 회로 구동방안이 제안되었다. 양극성 펄스 출력을 위한 파워셀의 각 래그의 단락을 방지하기 위한 게이트 회로가 설계되었다. 설계된 양극성 펄스 파워 모듈레이터의 동작을 검증하기 위해 테스트 회로가 구현되었다. 시험회로는 출력전압, 펄스 폭, 반복률 가변 조건에서 테스트 되었으며, 이를 통해 제안하는 양극성 펄스 파워 모듈레이터의 구조 및 게이트 구동회로의 신뢰성이 검증되었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.42-48
• /
• 2006

In this paper a joint detection method for other cell interference cancellation is proposed in the next generation hybrid TD-CDMA mobile communication systems. A joint detection technique, a most characteristic feature of hybrid TD-CDMA mobile communication systems. retrieves users' data in the same time slot simultaneously with the elimination of multiple user interference. Previously a two stage joint detection method was proposed to cancel other cell interference as well as multiple user interference in the target cell. However the previous scheme does not have concrete ways to recognize other cell users who give major interference to the target cell. Thus all users in neighbor other cells has to be jointly detected and it causes huge complexity of the two stage joint detection. In this paper a method is proposed to perform two stage joint detection according to users' interference with the target cell. Performances of the proposed scheme are investigated through simulations and compared to the previous method the proposed method has no performance degradation and also lower the complexity of two stage joint detection significantly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1307-1312
• /
• 2015

As smart-phones become popular, mobile data traffic has been dramatically increasing and intensive researches on the next-generation mobile communication network is in progress to meet the increasing demand for mobile data traffic. In particular, heterogeneous network (HetNet) is attracting much interest because it can significantly enhance the network capacity by increasing the spatial reuse with macro and small cells. In the HetNet, we have several problems such as load imbalance and interference because of the difference in transmit power between macro and small cells and cell range expansion (CRE) can mitigate the problems. In this paper, we propose a new cell selection scheme with adaptive cell range expansion bias (CREB) for ultra dense HetNet and we analyze the performance of the proposed scheme in terms of average cell transmission rate through system-level simulations and compare it with those of other schemes.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.2
• /
• pp.305-314
• /
• 1996

In the paper, we divide the ATM cells generated by multimedia systems that want to transmit multimedia informations over B-ISDN into two categories:i)a media cell with a media information and ii) a synchronization cell with a synchronization information. We induce a media cell loss equation and a synchroni- zation cell loss equation based on probability distribution functions with on-off source as an input traffic model. In order to meet the requirements of real-time and integrity of multimedia informations, multimedia synchronization cells should provide the delay-sensitive and the loss-sensitive requirements. A traffic control mechanism needs to satisfy above requirements. According to the performance evaluation by a traffic control model simulation, we describe both spatial priority for minimizing the synchronization cell loss and temporal priority for reducing the synchronization cell delay must be applied simultaneously.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.39-44
• /
• 2013

Long Term Evolution (LTE) - Advanced has developed Heterogeneous Network (HetNet) that consists of a mix of macrocells and low-power nodes such as picocells to improve the system performance. Also, to encourage data offloading in HetNet, Cell Range Expansion (CRE) have been introduced. In this paper, we propose a cell selection scheme based on Signal to Interference plus Noise Ratio (SINR) for optimal offloading effect. And we manage the interference for user located in cell range expanded region using Almost Blank Subframe (ABS) with flexible ABS ratio to improve the spectrum efficiency in time domain. Simulation results show that proposed scheme can improve spectrum efficiency of macrocell and picocell user. Eventually, proposed scheme can imporve overall user performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.12
• /
• pp.1033-1044
• /
• 2002

In this Paper, a new FRAM design technique utilizing grounded-plate PMOS-gate (GPPG) ferroelectric cell is proposed. A GPPG cell consists of a PMOS access transistor and a ferroelectric data storage capacitor. Its plate is grounded. The proposed architecture employs three novel methods for cell operation: 1) $V_{DD}$ -precharged bitline, 2) negative-voltage wordline technique and 3) negative-pulse restore. Because this configuration doesn't need the plate control circuitry, it can greatly increase the memory cell efficiency. In addition, differently from other reported common-plate cells, this scheme can supply a sufficient voltage of $V_{DD}$ to the ferroelectric capacitor during detecting and storing the polarization on the cell. Thus, there is no restriction on low voltage operation. Furthermore, by employing a compact column-path circuitry which activates only needed 8-bit data, this architecture can minimize the current consumption of the memory array. A 4- Mb FRAM circuit has been designed with 0.3-um, triple-well/1-polycide/2-metal technology, and the possibility of the realization of GPPG cell architecture has been confirmed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.7
• /
• pp.7-16
• /
• 2000

This paper reports a methodology and its application for extracting cell capacitances and parasitic capacitances in a stacked DRAM cell structure by a numerical technique. To calculate the cell and parasitic capacitances, we employed finite element method (FEM), The three-dimensional DRAM cell structure is generated by solid modeling based on two-dimensional mask layout and transfer data. To obtain transfer data for generating three-dimensional simulation structure, topography simulation is performed. In this calculation, an exemplary structure comprising 4 cell capacitors with a dimension of $2.25{\times}1.75{\times}3.45{\mu}m^3$, 70,078 nodes with 395,064 tetrahedra were used in ULTRA SPARC 10 workstation. The total CPU time for the simulation was about 25 minutes, while the memory size of 201MB was required. The calculated cell capacitance is 24.34fF per cell, and the influential parasitic capacitances in a stacked DRAM cell are investigated.

• KSBB Journal
• /
• v.24 no.5
• /
• pp.463-468
• /
• 2009

Selenium-containing peptide (Selenium peptide) was produced by autolysis of Saccharomyces cerevisiae which was cultured in inorganic selenium-supplemented medium. Selenium peptide showed antioxidant activity and protective effects on UVB irradiated human fibroblast. Minimal toxicity of selenium peptide was observed whereas selenium nitrate exhibited cell toxicity as low as $10^{-9}\;M$. Selenium peptide also increased human fibroblast growth, procollagen type I and also decreased MMP-1 (matrix metalloprotease-1). This result showed the potential of selenium peptide as a nontoxic antioxidant.