• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.81-88
• /
• 2007

The geometry of satellite image captured by linear CCD sensor is different from that of frame camera image. The fact that the exterior orientation parameters for satellite image with linear CCD sensor varies from scan line by scan line, causes the difference of image geometry between frame and linear CCD sensor. Therefore, we need the epipolar geometry for linear CCD image which differs from that of frame camera image. In this paper, we proposed a method of resampling linear CCD satellite image in epipolar geometry under the assumption that image is not formed in perspective projection but in parallel projection, and the sensor model is a 2D affine sensor model based on parallel projection. For the experiment, IKONOS stereo images, which are high resolution linear CCD images, were used and tested. As results, the spatial accuracy of 2D affine sensor model is investigated and the accuracy of epipolar resampled image with RFM was presented.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.471-478
• /
• 2016

This paper proposes the results of analysis of correlation between satellite geometry elements for an effective use of satellite images. To achieve accurate positional information, stereo images have normal range of convergence and BIE (BIsector Elevation) angles which are greatly influenced by azimuth and elevation angle of individual image. In this paper, the variations of convergence and BIE angles are estimated according to azimuth angle differences between two images and each elevation angle. The analysis provided strong support for predicting stereo geometry without complex analysis of epiploar geometry or mathematics. The experiment results showed that more than 150°, 130°, and 100° azimuth angle differences need to be constructed when elevation angle of two images is 50°, 60°, and 70°, respectively, in order to make the convergence and BIE angle within normal range. The results are expected to be fully used for various application using stereo images.

• Journal of the Korean Geographical Society
• /
• v.49 no.1
• /
• pp.45-56
• /
• 2014

Data composite methods have been typically applied to satellite-based vegetation index(VI) data to continuously acquire vegetation greenness over the land surface. Data composites are useful for construction of long-term archives of vegetation indices by minimizing missing data or contamination from noise. In addition, if multi-sensor vegetation indices that are acquired during the same composite periods are used interchangeably, data stability and continuity may be significantly enhanced. This study evaluated the influences of sensor geometry on MODIS vegetation indices and investigated data compatibility of two difference vegetation indices, the Normalized Difference Vegetation Index(NDVI) and the Enhanced Vegetation Index(EVI), for potential improvement of long-term data construction. Relationships between NDVI and EVI turned out statistically significant with variations among vegetation covers. Due to their curvilinear relationships, NDVI became saturated and leveled off as EVI reached high ranges. Correlation coefficients between Terra- and Aqua-based vegetation indices ranged from 0.747 to 0.963 for EVI, and from 0.641 to 0.880 for NDVI, showing better compatibility for EVI compared to NDVI. In-depth analyses of VI outliers that deviated from regression equations constructed from the two different sensors remain as a future study to improve their compatibility.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.421-432
• /
• 2015

There are significant differences in geometric property and stereo model accuracy between single-sensor stereo that uses two images taken by stereo acquisition mechanism within identical sensor and dual-sensor stereo that randomly combines two images taken from two different sensors. This paper compares the two types of stereo pairs thoroughly. For experiment, two single-sensor stereo pairs and four dual-sensor stereo pairs were constituted using SPOT-5 stereo and KOMPSAT-2 stereo covering same area. While the two single-sensor stereos have stable geometry, the dual-sensor stereos produced two stable and two unstable geometries. In particular, the unstable geometry led to a decrease in stereo model accuracy of the dual-sensor stereos. The two types of stereo pairs were also compared under the stable geometry. Overall, single-sensor stereos performed better than dual-sensor stereos for vertical mapping, but dual-sensor stereos was more accurate for horizontal mapping. This paper has revealed the differences of two types of stereos with their geometric properties and positioning accuracies, suggesting important considerations for handling satellite stereo images, particularly for dual-satellite stereo images.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.27-32
• /
• 2004

Absolute optical angle sensor is described that is an essentially digital opto-electronic device. Its purpose is to resolve the relative and absolute angle position of coded disk using Pseudorandom-code and Geometry-code. In this technique, the angular position of disk is determined in coarse sense first by Pseudorandom-code. A further fine angular position data based on Pixel count is obtained by Geometry-code which result 0.006$^{\circ}$ resolution of the system provided that 7 ${\mu}{\textrm}{m}$ line image sensor are used. The proposed technique is novel in a number of aspects, such that it has the non-contact reflective nature, high resolution of the system, relatively simple code pattern, and inherent digital nature of the sensor. And what is more the system can be easily modified to torque sensor by applying two coded disks in a manner that observe the difference in absolute angular displacement. The digital opto-electronic nature of the proposed sensor, along with its reporting of both torque and angle, makes the system ideal for use in intelligent vehicle systems. In this communication, we propose a technique that utilizes Pseudorandom-code and Geometry-code to determine accurate angular position of coded disk. We present the experimental results to demonstrate the validity of the idea.

• Korean Journal of Remote Sensing
• /
• v.18 no.4
• /
• pp.233-242
• /
• 2002

In this paper, an epipolar model without the ephemeris data is proposed. Also, various epipolar models such as the epipolar geometry of perspective sensor, the one proposed by Gupta and Hartley and the one based on the Orun and Natarajan's sensor model are reviewed and their accuracy are quantitatively analyzed using devised measure. Modeling data from ground control points, ground control points, ephemeris data and independent checking points are selected on SPOT over Taejon and Boryung area and KOMPSAT over Taejon and Nonsan area. Based on the results, the epipolar model of perspective sensor and the one by Gupta and Hartley have the average accuracy within 1 pixel but show high errors in several checking points. The proposed epipolarity model provides better results than that of perspective sensor and by Gupta and Hartley. Also, it shows the accuracy similar to the one based on Orun and Natarajan's sensor model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1666-1671
• /
• 2002

A lane sensing algorithm using vision sensors is developed based on lane geometry models. The parameters of the lane geometry models are estimated by a Kalman filter and utilized to reconstruct the lane geometry in the global coordinate. The inverse perspective mapping from image plane to global coordinate assumes earth to be flat, but roll and pitch motions of a vehicle are considered from the perspective of the lane sensing. The proposed algorithm shows robust lane sensing performance compared to the conventional algorithms.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.1
• /
• pp.45-57
• /
• 2007

Recently, the development of sensor devices has accelerated researches on advanced technologies like Wireless Sensor Networks. Moreover, spatial sensors using GPS lead to the era of the Ubiquitous Computing Environment which generally uses spatial information and non-spatial information together. In this new era, a real-time processing system for spatial sensor data is essential. In this reason, new data processing systems called DSMS(Data Stream Management System) are being developed by many researchers. However, since most of them do not support geometry types and spatial functions to process spatial sensor data, they are not suitable for the Ubiquitous Computing Environment. For these reasons, in this paper, we designed and implemented a spatial DSMS by extending STREAM which stands for STanford stREam datA Manager, to solve these problems. We added geometry types and spatial functions to STREAM in order to process spatial sensor data efficiently. In addition, we implemented a Spatial Object Manager to manage shared spatial objects within the system. Especially, we implemented the Simple Features Specification for SQL of OGC for interoperability and applied algorithms in GEOS to our system.

• The Journal of Korea Robotics Society
• /
• v.3 no.2
• /
• pp.112-116
• /
• 2008

This paper presents URS (Ubiquitous Robotic Space) Modeling and service technique for the robotic security service while bridging between virtual space and physical space. First, this paper introduces a concept of virtual URS and responsive virtual URS. Second, this paper addresses modeling of URS which covers modeling of indoor geometry and environment sensor. Third, this paper describes virtual URS services including interactive virual-physical bridging service.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1107-1112
• /
• 2006

Geometry PIG (Pipeline Inspection Gauge)는 배관 내에 삽입되어 내부를 흐르는 매체에 의해서 추진되는 장치로서 배관의 기하학적 형상을 파악하기 위해 사용된다. Geometry PIG는 여러 종류의 센서를 지니고 배관 내부를 주행 하면서 탑재된 저장장치에 빠른 샘플링 속도로 데이터를 저장하기 때문에 획득된 많은 양의 데이터를 분석하기 위한 가시화 기법이 필요하다. 본 논문에서는 데이터의 특성을 고려하여 다양한 가시화 기법들의 스키마를 정의하고, 이러한 가시화 기법들을 이용해 geometry PIG 데이터 분석을 위한 통합된 가시화 기법을 제안한다. 통합된 가시화 기법은 각 가시화 기법들을 사용자가 원하는 형태로 배치하며 사용자가 원하는 시점에서 데이터를 파악할 수 있도록 가시화 기법에 따른 동기화와 사용자 인터페이스를 지원한다.