• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.15-23
• /
• 2000

RC oscillation method was applied to study the condenser characteristics of two metal sticks insulated by vinyl tube and used in the dielectric constant determinations of most soils. Its capacitance as influenced by the contacted ambient materials was measured as relative capacitance of the sensor sticks compared with the standard one on the RC oscillation circuit. According to the equivalent circuit of the sensor stick set, the measured capacitance was composed of a basic capacitance connected in parallel with sensor stick capacitance, which was composed of lineally connected vinyl tube capacitances and the sensing part capacitance. The dielectric constant (U) of the contacted ambient moist soil located in the sensing part around the sticks interrelated with the other parameters as following equation. $$\frac{1}{C-B}=\frac{k}{U}+Z$$ where C is the output total relative capacitance, B is the hidden and fixed basic relative capacitance, k is a constant related with U, and Z is a constant for the insulating vinyl tube capacitances determined by its thickness and dielectric constant. The constant k is determined by the spacing and length of sensor sticks. The Z value is theoretically an invariable constant, but it may become considerably bigger than the determined in lab if air tube is formed on the surface of sensor sticks by some shocks on them after their installation in soil. Due to the unstability of lab Z value, it may be better to revise it after sensor stick's installation in soil and no shaking shocks should be applied on them.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.41-45
• /
• 1996

비접촉방법데 의한 변위 측정기술은 공작물의 가공중(in-process)형상치수의 측정 또는 각종 계 측에 대한 자동화기술의 필요성이 증대됨에 따라 다양한 원리를 응용하여 발전되고 있다. 전통적인 방법으로는 가변 리럭턴스(variable reluctance)형, 와전류(eddy current)형, 콘덴서(capacitance)형 등의 전기적 센서들이 주를 이루고 있으나 최근에 들어서는 광전자기술의 발달에 힘입어 여러 광학 측정법들이 연구되어 실용화 되고 있다. 본 연구에서는 측정자동화 용도로 사용될 수있는 광삼각법에 의한 비접촉방식의 광학센서에 대한 기본 연구 결과를 서술하였다. 광삼각 비접촉 측정의 기본 원리와 측정 범위 및 분해능 관점에서의 센서 설계의 기본 방법을 제시하며 또한, 실제적인 센서의 설계 및 제작을 위해 응용될 수 있는 기본광학소자의 현 기술적 수준과 성능을 기술하였다. 최종적으로는 실제적인 센서의 설계제작 과정과 시제품의 성능 실험을 통한 응용 가능성이 검토되었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.4
• /
• pp.377-383
• /
• 2024

In this paper, the flow uniformity improvement and flow characteristic of the sensor condenser for a heat exchanger cleaning system were studied using response surface method and computational-fluid-dynamics. The design variable was defined as a shape for controllable sensor condenser area. The objective functions were defined as the improvement of flow uniformity in heat exchanger cleaning system tubes. The flow uniformity improvement and flow characteristic of optimum model was verified by numerical analysis and the reliability of the model was retained by comparison of numerical analysis and comparative analysis with the reference model.

• Electrical & Electronic Materials
• /
• v.7 no.1
• /
• pp.73-79
• /
• 1994

페로브스카이트형 강유전체의 활발한 연구는 제2차 세계대전중 미국과 구 소련등에서 TiO$_{2}$ 고체 콘덴서를 개량하던 중에 Ba 이 첨가된 BaTiO$_{3}$를 발견하면서부터 시작되었고, 일본에서는 PbZr$_{0.5}$Ti$_{0.5}$O$_{3}$의 morphotropic phase boundary를 발견하면서부터 이루어졌으며, 그것이 지니는 특성때문에 고체콘덴서, 초전형 적외선 센서, 초음파 발생과 검출기, 압전 점화기 및 표면파필터기 등 여러방면에 실용화 되고 있다. 따라서, 본 보고에서는 지금까지 연구된 페로브스카이트형 강유전체 세라믹 재료의 물성을 소개하고 앞으로의 연구동향 등에 관하여 서술하고자 한다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.2
• /
• pp.110-118
• /
• 1997

This paper describes the dissipation factor measuring techniques of insulating oil on operating pole transformers by using digital signal processor. After applying voltage to the condenser which is in¬stalled in a transformer, acquiring source voltage and current of condenser and using cross-correla¬tion techniques, we can check the dissipation factor of insulating oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and software such as cross -correlation techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by using computer simulation, and compared the simplified measuring devices with Schering bridge on degraded insulating oil. The result showed that this measuring tech¬nique can be used as diagnostic method on the pole transformers.

• Journal of Sensor Science and Technology
• /
• v.16 no.3
• /
• pp.174-178
• /
• 2007

This paper presents a novel, highly sensitive condenser microphone with a flexure hinge diaphragm. We used the finite-element analysis (FEA) to evaluate the mechanical and acoustic performance of the condenser microphone with a hinge diaphragm. And we fabricated the miniature condenser microphones with area of 1.5 mm${\times}$1.5 mm. From the simulation results, we confirmed that the maximum displacements at the center of flexure hinge diaphragms are several hundred times, compared with flat diaphragms. The sensitivities of fabricated miniature microphones are about $12.87{\mu}V/Pa$ at 1 kHz under a low bias voltage of 1 V, and the frequency response is flat upto 13 kHz.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.16-23
• /
• 1999

When a moving piezoelectric transducer detects an object in water, its receiving sensitivity is attenuated by Doppler effect. In this paper, a method for compensating the effect is suggested by using a newly designed condenser of which capacitance is varied according to the moving speed of the transducer. Using the method, the receiving resonant frequency of the transducer can be changed automatically. As a result, there is good agreement between the results of experiment and those of calculation. It is confirmed that the response sensitivity degradation of transducers due to Doppler effect can be compensated in the range of $1{\sim}10^m/_s$ moving speed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.209-209
• /
• 2023

본 연구에서는 강우 시 발생하는 음향 및 진동 신호를 기반으로 강우강도를 산정하기 위한 방법론을 제안하였다. 먼저, Raspberry Pi, 콘덴서 마이크 및 가속도 센서로 구성된 관측 기기로부터 실제 비가 내리는 환경에서의 음향 및 진동 신호를 수집하였다. 가속도 센서로부터 계측된 진동 신호를 활용하여 강우 유무에 대한 이진 분류를 수행하고, 강우가 발생한 것으로 판단된 기간에 해당하는 음향 신호에 Short-Time Fourier Transform 기술을 적용하여 주파수 영역에서 나타나는 magnitude의 평균과 표준 편차, 최고 주파수 등의 특징을 기반으로 강우강도를 산정하였다. 이를 위해 앙상블 기반의 머신러닝 학습 모델인 XGBoost 알고리즘을 사용하였으며, 광학 우적계를 통해 관측한 강우강도와 산정 결과를 비교·평가하였다. 강우강도 산정 과정에서 사용된 음향 신호의 길이를 1초, 10초, 1분으로 구분하였으며, 무강우 기간 내 음향 정보로부터 배경 음향에 의한 노이즈를 제거하고자 하였다. 최종적으로 강우 유무 이진 분류 과정의 선행 여부, 음향 신호의 길이 및 노이즈 제거 방법에 따른 강우강도 산정 결과들에 대한 성능 비교를 통해 본 연구에서 제안하고자 하는 방법론의 실효성을 평가하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.87-95
• /
• 2005

Most of the motorcycle engines have used carburetors in the fuel system, because of its simple structure and reliability but the fuel economy and the emissions of those engines are bad when we compared with automobile engines .To meet with the tighten emission regulations and the higher requirements for fuel economy, the application of the carburetor on the motorcycle engines would be limited. Therefore, it is important to develope a ECU control system for motorcycle engines. Since the fuel injection system is expensive, it is necessary to decrease the cost of ECU system for motorcycle engines, but the accuracy of the ECU control system should be increased as high as possible. In this paper, we studied about the AFS characteristics of motorcycle engine controled by indirect method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.68-71
• /
• 1993

In this study, decay time and frquency response characteristics of Self-Integrating Magnetic Sensor were investigated, decay time is 4.4[ms], frequency band that could be measuring is from 40[Hz] to 1[kHz]. The magnetic field components produced by operation of electric machines is measured and analyzed.