• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.195-196
• /
• 2016

In the maritime mobile radiocommunication service, AIS(Automatic Identification System) devices are most widely using for the exchange of ship's navigational information. The AIS time slot usage increases due to increasing number of ships installed with AIS, and thus the reception rate of AIS data decrease. In order to mitigate this problem, international organizations recommend a sectorised receiving technique using directional antenna. This paper analyzed the sectorised receiving effectiveness of AIS data using Yaga antenna.

• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.59-66
• /
• 1986

A prototype ultrasound sector B-scanner has been developed where the front-end hardware refers to all the necessary circuits for transmitting the ultrasound pulses into the human body and receiving the reflected echo signals from it. The front-end hardware can generally be divided into three parts, i.e., a pulse generator for insonification, a receiver which is responsible for processing of low-level analog signals, and a steering controller for driving the mechanical sector probe whose functions and design concepts are described in this paper. The front-end hardware is implemented which incorporates the following features: improvement of the axial resolution using a circuit which reduces the ring-down time, flexibility of generating time-gain compensation curve, and adoption of a one-chip microcomputer for generating the rate pulses based on the sensor output waveforms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.807-811
• /
• 2001

In this paper we proposed a dual-frequency circular sector microstrip antenna with orthogonal polarized modes and high isolation between the two feeding ports. And then we designed a transceiver operating at 5.6 GHz for transmitting and at 5.5 GHz for receiving. The good isolation provided by the proposed antenna is used as the basis for the transmit-receive filtering of transceiver. The operating frequencies and polarization characteristics of the proposed antenna is calculated by using a cavity model. The 5-parameters and radiation patterns of the antenna are measured. A power amplifier and a low noise amplifier are designed and integrated with antenna to make a transceiver, which has about 13dB transmitting gain and about 8㏈ receiving gain.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.24-30
• /
• 2008

In this paper we analyze the performance of an adaptive sector cell system, which is adopted to maintain the traffic balance between sectors and to utilize the cell resources effectively, using the data collected from real channel environments. In the data measurements, we transmitted the QPSK modulated signal with carrier frequency of 1.95GHz and received the signals using the 8x4 array antenna equipped on the top of buildings in the urban area. We analyzed the angular distribution and the delay spread of a user signal and analyzed angular distribution of mobile users in a cell using the collected data. Also, we propose the vector channel modeling using the estimated pdf(probability distribution function) of the analyzing results. Through the proposed channel modeling the improvement of the call blocking rate was analyzed when using the adaptive sector cell system, and computer simulations show that the call blocking rate of the adaptive sector cell system was much lower than that of the fixed sector cell system. Additionally, it shows that the call blocking rate increases severely in the fixed sector cell system while the difference of the call blocking rate was smaller in the adaptive sector cell system, as the user density of the spatial distribution increases.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.2
• /
• pp.72-80
• /
• 1998

Most cellsite are operated by 3-sector system in these days. Due to the weak propagating signal caused by peculiar topography, there exist weak or shadow regions. To solve this problem, we need double beam in a sector, thus we have to design 4-sector cellisite even if investment cost and maintenance cost gets high. We propose here using the dual TX-ANT instead of designing 4-sector cellsite to reduse investment cost and to improve call quality. We choose YangPeong and Gepo cellisite in Seoul and DuckCheon cellsite in Pusan to run the experiments. And we verified the practicality by comparing data before and before and after the installation of dual TX-ANT.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.687-694
• /
• 2012

In OFDMA-based cellular system, inter-cell interference (ICI) reduces system capacity by aggravating receiving performance of the users located in edge of the cell. Therefore, to mitigate ICI is very important issue in cellular system. To deal with ICI problem, fractional frequency reuse (FFR) is introduced. FFR is an interference management technique. It separates each cell into inner cell and outer cell. Then, it allocates whole system bandwidth to inner cell and different frequency partition to each sector of outer cell. By doing this, outer cell users can ignore interferences from adjacent cells. So, the receiving performance of the cell edge users can be fairly increased. However, using FFR technique has a fatal side effect. In order to use different frequency partition among three sectors of outer cell, they can use only a third of the whole system bandwidth. Then, the reduction of available bandwidth reduces the system throughput directly. To solve this problem, we propose a new FFR method that allocates partially overlapped frequency partition to each sector of outer cell. And then, we suggest a proper overlapping ratio for practical cellular system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.1-7
• /
• 2009

In this paper, the author presents the MIMO(Multi-Input Multi-Output) receiver algorithm with the capability of inter-cell or inter-sector interference cancellation over multi-antenna OFDM(Orthogonal Frequency Division Multiplexing) systems. As contrast with the previous research dealing with the filtering scheme at the time domain, the proposed algorithm is presented as the pre-filtering scheme which can be applicable to the frequency domain. Note that the proposed one can be implemented only by pilot symbols which are used in the channel estimation. In addition, it is analytically confirmed that the proposed scheme can be applied for either MIMO( C-SM(Collaborative-Spatial Multiplexing)) interference or SIMO(Single-Input Multi-Out) interference. The proposed receiver algorithm is verified by simulations over UL-PUSC SR off in IEEE 802.16e standard. From simulation results, it is confirmed that the proposed one can be applicable regardless of the kind of interference. Furthermore, it is verified that the performance is guaranteed even under Ole severe effect of interference and the improvement of system throughput is guaranteed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.12-20
• /
• 2013

Even though extensive research results have been applied to wireless cellular systems to improve their capacity and coverage, severe performance degradation experienced in cell boundary areas still remains as a major limiting factor to prohibit further improvement of user equipment (UE) throughput. In the Long Term Evolution-Advanced (LTE-A) standard of the Third Generation Partnership Project (3GPP), Some advanced techniques have been introduced to overcome this "cell-edge problem", including coordinated multipoint transmission and reception (CoMP) and inter-cell interference coordination (ICIC). In this paper, we propose yet another strategy to improve the performance of low-tier UEs by using the concept of multiple beam direction patterns (BDPs). Such multiple BDPs can be implemented using multi-layer antenna arrays stacked vertically at base station (BS) sites to transmit signals in different main beam directions. In comparison to conventional three-sector antennas with a fixed beam pattern, the proposed methods makes signal transmission in a rotational fashion to significantly enhance the reception quality of UEs located near sector (or cell) edge areas, preventing the situation where certain UEs are marginally covered by the BS for the whole transmission time. Performance evaluation results show that the proposed scheme outperforms the conventional three-sector transmission by 171% in low 5% UEs in terms of the UE throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.99-106
• /
• 2009

In this paper, we propose UCA algorithms that are applied to the unified inter-cell interference mitigation through frequency plannings in OFDMA cellular systems. Under three frequency plannings, UCA algorithms allocate frequency channels to UEs(User Equipments). Proposed UCA algorithms require the information of received signal power from home sector and neighbor sectors respectively. We compare all possible combinations of UCA algorithms and frequency plannings through compute simulation. A primary performance measure is the low 5th percentile of SINR at UEs. The proposed UCA algorithms can avoid the interference to neighbor cells by allocating relatively low transmit power to centrally-located UEs and cancel inter-cell interference at cell-edge UEs by a coordinated symbol repetition. We show that UCA algorithm 2 applied in frequency planning 1 is promising among other combinations of UCA algorithms and frequency palnnings in terms of the low 5th percentile of SINR at UEs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2839-2846
• /
• 2014

New VHF band for use in VDE is determined by WRC-12 due to the overload of AIS VDL, and the system characteristics of the VDE is recommended as ITU-R M. 1842-1. CS-TDMA, a multiple access method of AIS class B, is recommended as that of the VDE. It is inefficient for CS-TDMA just applying the report interval used in AIS class B to transmit high speed data with higher payload in the aspect of efficiency. In this paper, a simulation is executed in order to determine adequate report interval according to the number of active ships that affects directly network traffic. To this end, the performance of CS-TDMA, which includes the number of received packets, reception success rate, channel utilization, and collision rate, is investigated via a simulation.