• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1848-1856
• /
• 2008

In order to enhance the functionality of a cotton fabric actually used as the clothing material for patients, the fabrics are treated with chitosan/nanosilver mixed solution. The nanosilver has excellent biocompatibility, not causing an environmental pollution as a natural polymer, provides expectation of an additional performance, does not harm human beings, and shows a strong antibacterial activity even in a small amount, and supplements chitosan, which is disadvantaged if used alone for fabric treatment. This study evaluates functional improvement of the clothing material for patients and observes through hygienic characteristics which are the most important function. In antibacterial activity of the fabrics treated with chitosan/nanosilver mixed solution against Staphylococcus aureus, higher ratio of chitosan was observed to achieve better antibacterial activity. In antibacterial activity against Klebsiella pneumoniae, higher ratio of nanosilver was observed to achieve better activity. Regarding laundry durability of antibacterial activity after repeated laundering, activity against Staphylococcus aureus was little reduced, but was greatly lowered against Klebsiella pneumoniae. Deodorization activity was excellent as the mixed ratio of chitosan was increased, and air permeability, moisture permeability and moisture regain were reduced as the mixed ratio of nanosilver was increased.

• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.237-241
• /
• 2020

The flow analyses in this study were executed on the three washing machine models with the rotors like real shapes. On the pressures and speeds for the left, right and bottom planes of rotors, model C was generally found to have the greatest pressure on the flow, more than twice as much as model A, and in order of model B and model A. At the streamline velocities of flow on the side of the rotating blades of models A, B and C, model C had the greatest rate of flow overall, which was 1.7 times higher than model A, followed by model B and model A. In case of model C, the number of blades is smaller than model A or model B, but the thickness of lower rotor becomes thicker. It can be seen that model C improves the washing performance due to the high flow pressure and high flow rate. Also, it is seen that this study is adequate at the efficient design with durability of the washing machine rotor practically and the aesthetic convergence of the rotor.

• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.159-164
• /
• 1999

The study was investigated to the effect of antimicrobial finishing of towel treated by organic antimicrobial agent. It was measured for the optimal condition such as treated time, treated concentration and temperature. After amtimicrobial treatment, mechanical and fastness properties, anti-laundering property were measured.The antimicrobial activity of samples was analyzed quantitatively by masureing the number of colonies of Staphylococcus aureus using the shake flask method. Towel samples treated with the optimal condition such as treated time of 10 minute, and treated temperature of $30^{\circ}C$, concentration of organic antimicrobial agent of 3.5% were shown a high reduction rate in the number of colonies grown and clear zones of inhibition.The effect of reduction rate for laundering until the number of 20 times was shown high reduction rate of over 80%. And the mechanical properties of samples treated with organic antimicrobial agent were not changed approximately.

• Journal of Convergence for Information Technology
• /
• v.12 no.1
• /
• pp.172-179
• /
• 2022

Unlike other processes such as washing, the ironing process in the laundry process is difficult to standardize and thus relies on manual labor. Unlike upper garments, pants have pleats at the waist as well as a crease line below the waist, Therefore, two separate ironing devices have been developed and used. However, in this method, problems such as additional worker input, space loss, and wrinkling of pants occur due to manual movement between processes, Consequently, a pants ironing device that combines the two equipments is required. The all-in-one pants ironing system described in this paper automatically sequentially irons the upper part and side of the pants regardless of the length, shape, and upper pleats of the pants. It also performs a self-diagnosis function while displaying the ironing progress on the user's monitor. As a result of this study, it became possible to double the amount of ironing and reduce power consumption by more than 20% compared to the case of using two independent equipment.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.466-477
• /
• 1994

PEG 600-diglycidyl ethers(PDE) were synthesized using $BF_3$ catalyst by the reaction of epichlorohydrin and PEG 600 which is known to have the hygroscopicity, softening property, and antistatic property. Water-soluble long chain polyamines(PDET) were synthesized by coreaction of PDE and triethylenetetramine which is high conductive aliphatic amine curing agent. To prevent the gelation of the PDET and increase the water-solution stability, water-soluble quaternary ammonium polyamines were synthesized by cationation of PDET with acetic acid. Antistatic agents PDET-2A, PDET-5A, PDET-6A, PDETA-2A and PDETA-4A were prepared by the mixing of PDET-2, PDET-5, PDET-6, PDETA-2 and PDETA-4 with water. Synthesized antistatic agents were treated on PET textiles with and without resin. Then surface electrical resistivity and half life characteristics value were tested. As the results there were no remarkable decreasing changes in antistatic abilities of the textiles treated with PDETA-2A and PDETA-4A after 50 times washing. So PDETA-2A and PDETA-4A were proved to be durable antistatic agents. Surface electrical resistivity of the textiles treated with PDETA-2A and PDETA-4A before washing were $1{\times}10^7{\Omega}$ and $2{\times}10^7{\Omega}$, respectively, and half life characteristics values were 0.8sec and 1.1sec, respectively. Therefore PDETA-2A and PDETA-4A were proved to be good antistatic agents.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.125-126
• /
• 2008

기존의 후가공에 의한 방염, 발수, 항균 가공물은 원단의 표면에 부착된 방염제로 인하여 다른 기능성 가공의 성능이 급격히 저하되므로 항균성이나 발수성을 함께 나타내기 어려웠으나, 본 연구에서는 THPC-UREA와 암모니아 기상중합 기술을 이용하여 섬유의 내부 피브릴층에 고내구성 방염성을 부여한 후, 불소계 발수제와 침상구조의 4급 암모늄실란계 항균제를 섬유 표면에 고착시킴으로써 방염성과 발수성, 항균성을 동시에 가지면서 세탁내구성도 우수한 결과를 얻었다.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.264-271
• /
• 2010

The purpose of this study was to investigate performance evaluation of absorbing and fast-drying fabric after washing. In the comparison of absorption and fast-drying properties, there was slight difference among the materials depending on thickness, weight, and fabric structure. Absorption speed of the materials depended on the frequency of washing which might be caused by modification of fabric structure or composition fiber due to friction during washing. The ability of fast-drying of the materials was gradually decreased with the increase of washing frequency, which might be caused by fatigue accumulation on inner fiber and structural change or destruction with friction during washing.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.33-45
• /
• 2000

The handle were observed by objective and subjective method as the washing was repeated for 4 kinds(sample A, B, C, D) of materials which have different water vapor transmission, and the change of water vapor transmission each others. The results of factor analyses for 18 polar adjective words on subjective handle test yielded 4 factors, that were 'elastic property', 'surface property', 'thickness and weight property' and 'thermal and rigid property'. The surface properties were deteriorated remarkably as washing was repeated and significant difference were observed. Compared with the primary hand value for each materials, the statistical difference of samples was shown at Koshi and Fukurami measured by the KES-FB system. Koshi decreased for all the materials after repeated washing, and Fukurami had a tendency to increase for all the materials in proportion to repeated washing. Significant difference of total hand value wasn't shown in repeated washing number, but in fabric types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.23-30
• /
• 1994

The objective of this study was to analyze the effect of the dissolution of detergent on washing and rinsing efficiency, and the possibility of saving detergent in washing. Washing and rinsing efficiency were reviewed in three different ways : A method was to input dissolved detergent by the use of rapid detergent dissolution instrument, B method was to input dissolved detergent beforehand, and C method was to input undissolved detergent. The results were as follows 1. A method > B method > C method was shown in detergency with washing time and three method's gaps were reduced because detergent dissolution effect was reduced by mechanical action in proportion of washing time. Especially, according to detergency of A method of 0.07% and C method of 0.1% was appeared approximately, saving detergent was expected by rapid dissolution of detergent. 2. A method > B method > C method was shown in detergency with washing temperature. As the washing temperature rose, the detergent reached chemically more activated state and become easily soluble. It resulted for the detergent to penetrate and adhere to laundry easily. 3. A method > B method > C method was shown in detergency with detergent concentration and C method was more sensitive than A, B method against change of detergent cocentration. Rapid detergent dissolution made it possible not only to enhance the washing efficiency but also to save the detergent because detergency of A method in low concentration is higher than that of C method. 4. A method $\geq$ B method > C method was shown in rinsing ratio with detergent input method. It indicated input dissolved detergent was advantageous in rinsing. 5. The result of anion surfactant concentration test of each process with detergent input method was shown like that A method In B method > C method in washing and reverse result was shown in rinsing. The anion surfactant concentration of C method was low during washing but high during rinsing. This was identical with previous results which shown the washing and rinsing efficiency improved with dissolved detergent usasge. 6. C method > B method > A method was shown in the degree of remaining detergent after rinsing. There was no remaining detergent after second rinsing in A and B method, but in C method four rinsings were required for the same result. Consequently, in A and B methods, less water and electricity were used, and less abrasion of cloth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2251-2258
• /
• 2014

In this paper, an integrated control system for removable welfare equipment disinfection is implemented. The integrated control system consisted of a hydrogen peroxide vapor supply control circuit, a sterilization chamber control circuit using low vacuum, and a washing control circuit using microbubble. A Smart-phone based remote control and monitoring system is implemented to monitor the operating status and communication status for the integrated control system. An experiment is set up to evaluate the performance of the integrated control system. The experiment result confirms that signal and operation status can transmit and receive within the control circuit. The integrated control system shows good performance in terms of sensor interface, communication state and control. In future research, the proposed control system should deploy to an actual system for trial test to prove its performance.