• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.155-163
• /
• 2017

Membrane filtration has become more popular in drinking water treatment recently, since the filtration can control not only particulate matters but also pathogenic microorganisms such as giardia and cryptosporidium very effectively. Pilot-scale ($120m^3/d$ of treatment capacity) and test-bed ($25,000m^3/d$ of treatment capacity) microfiltration experiments were conducted to find optimum operating mode and the critical flux. Optimum operating mode of pilot-test was assessed as inflow 1.0 min, filtration 36.5 min, air backwash 0.9 min, backwash 1.0 min and outflow 1.0 min with 50 LMH ($L/min{\cdot}m3^$) of critical flux. Critical Flux was calculated to be $50L/m^2-h$ (within TMP 0.5 bar) based on the increase formula of the transmembrane pressure difference according to the change of time at Flux 20, 40, 56 and 62 LMH in pilot operation. Chemical cleaning was first acid washed twice, and alkali washing was performed secondarily, and a recovery rate of 95% was obtained in the test-bed plant. The results of operating under these appropriate conditions are as follows. Turbidity of treated water were 0.028, 0.024, 0.026 and 0.028 NTU in spring, summer, autumn and winter time, respectively. Microfiltration has superior treatment capability and performance characteristics in removing suspended solids and colloidal materials, which are the main cause of turbidity and important carrier of metal elements, and it has shown great potential in being an economically substitute to traditional processes (sand filtration).

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.27-32
• /
• 2005

We propose an effective and environmentally friendly dry stripping method using a supercritical carbon dioxide ($SCCO_2$) system modified by a single and multiple cosolvents to remove ion-implanted photoresist and residue from a wafer surface at three different temperatures (97, 148, $200^{\circ}C$) and pressures (200, 300, 400 bar). After high dose of ion implantation the photoresist was not easily removed by using pure $SCCO_2$, but swollen. The $SCCO_2$ system modified by single cosolvents and multiple cosolvents mixed with aprotic solvents could not effectively remove the heavy organics, but swell them. However, the $SCCO_2$ system modified with multiple cosolvent (5%, v/v) composed of DMSO and DIW showed high removal efficiency for ion-implanted photoresists at $97^{\circ}C$ and 200 bar for 30 min (about 80%). In this study it has been shown that the dry stripping method using $SCCO_2$ system modified with multiple cosolvents could replace either plasma ashing or acid and solvent wet bench method and dramatically reduce accompanied chemical usage and disposal.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.2
• /
• pp.89-103
• /
• 2020

A frizz hair is referred to the fly-away hairs that have become bulky or deviated from the regular hair and the cause of that is not clear known. The internal lipids are related to the physical properties of hair such as elasticity and tensile strength and interracial studies have previously conducted to relate the lipid mass and Afrikaan hair, which has a lot of frizzy hair. Although washing hair is the only way to control the hair loss without damage of hair surface, the number of washing and lipid loss are not linearly correlated. In this study, the amount of lipid hair was analyzed by washing the hair with a few different types of shampoos containing various conditioning polymers and oils of different polarities. The results confirmed that the higher the polarity of the oil, the higher the lipid content. This method was applied to Indian frizzy hair to evaluate the degree of frizziness and found that the frizzy volume was more severe for a hair with less lipids. On the other hand, the frizzy hair volume of fly-away hairs was observed more broadly for the hairs with higher lipid contents. In addition, the friction on the surface of the hair did not differ due to the oil treatment. Taken together, it was concluded that hair frizzing was affected by the amount of lipids in the hair rather than by the adhesion between the oils. Thus, this study suggests that controlling the lipid contents in hair may be an important solution in the development of hair anti-frizzy technology.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.201-209
• /
• 2006

Various desorption methods were investigated for an activated carbon and zeolite 13X packed bed after benzene adsorption. Desorption experiments using hot steam, purge gas, and evacuation were performed. As a result, the desorption with hot steam showed the best performance. Hot steam makes the temperature in the adsorption column increase and gives arise to the desorption. Drying process should be accompanied to increase the efficiency because steam vapor prevents the adsorption later. The vacuum desorption showed poor performance and it reveals that temperature swing operation is more effective than pressure swing operation. In the purge gas desorption, good performance was achieved using evacuation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.23-23
• /
• 2011

Chemical-Mechanical Planarization (CMP) 공정이란 화학적 반응 및 기계적인 힘이 복합적으로 작용하여 표면을 평탄화하는 공정이다. 이러한 CMP 공정은 반도체 산업에서 회로의 고집적화와 다층구조를 형성하기 위하여 도입되었으며 반도체 제조를 위한 필수공정으로 그 중요성이 강조되고 있다. 특히 최근에는 Inter-Level Dielectric (ILD)의 형성과 Shallow Trench Isolation (STI) 공정에서실리콘 산화막을 평탄화하기 위한 CMP 공정에 대해 연구가 활발히 이루어지고 있다. 그러나 CMP 공정 후 scratch, pitting corrosion, contamination 등의 Defect가 발생하는 문제점이 존재한다. 이 중에서도 scratch는 기계적, 열적 스트레스에 의해 생성된 패드의 잔해, 슬러리의 잔유물, 응집된 입자 등에 의해 표면에 형성된다. 반도체 공정에서는 다양한 종류의 실리콘 산화막이 사용되고 gks이러한 실리콘 산화막들은 종류에 따라 경도가 다르다. 따라서 실리콘 산화막의 경도에 따른 CMP 공정 및 이로 인한 Scratch 발생에 관한 연구가 필요하다고 할 수 있다. 본 연구에서는 scratch 형성의 거동을 알아보기 위하여 boronphoshposilicate glass (BPSG), plasma enhanced chemical vapor deposition (PECVD) tetraethylorthosilicate (TEOS), high density plasma (HDP) oxide의 3가지 실리콘 산화막의 기계적 성질 및 이에 따른 CMP 공정에 대한 평가를 실시하였다. CMP 공정 후 효율적인 scratch 평가를 위해 브러시를 이용하여 1차 세정을 실시하였으며 습식세정방법(SC-1, DHF)으로 마무리 하였다. Scratch 개수는 Particle counter (Surfscan6200, KLA Tencor, USA)로 측정하였고, 광학현미경을 이용하여 형태를 관찰하였다. Scratch 평가를 위한 CMP 공정은 실험에 사용된 3가지 종류의 실리콘 산화막들의 경도가 서로 다르기 때문에 동등한 실험조건 설정을 위해 동일한 연마량이 관찰되는 조건에서 실시하였다. 실험결과 scratch 종류는 그 형태에 따라 chatter/line/rolling type의 3가지로 분류되었다 BPSG가 다른 종류의 실리콘 산화막에 비해 많은 수에 scratch가 관찰되었으며 line type이 많은 비율을 차지한다는 것을 확인하였다. 또한 CMP 공정에서 압력이 증가함에 따라 chatter type scratch의 길이는 짧아지고 폭이 넓어지는 것을 확인하였다. 본 연구를 통해 실리콘 산화막의 경도에 따른 scratch 형성 원리를 파악하였다.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.620-625
• /
• 2018

Liquid detergent based on sodium lauryl ethoxy sulfate (SLES) as main ingredient sometimes met gelling film on the surface when it is opened in the air. It was assumed because of the change of phase diagram of micelle by concentration change of surfactant, major ingredient of detergent when the water of detergent is evaporated. SLES showed strong hexagonal liquid crystal (LC) in 30~60 wt%, and lamellar LC over 60 wt%. In this research surface gelling formation of liquid detergent which is based on SLES as main ingredient was because of water evaporation. As water of detergent was evaporated, concentration of surfactant became higher. It was checked that surface gelling was LC of mixed surfactant system. Conclusionally we applied alpha olefin sulfonate (AOS) having good solubility, Sodium secondary alkane sulfonate (SAS) preventing hexagonal LC and hydrotrope sodium xylene sulfonate (SXS) and PEG1500 in order to prevent gelling film in SLES based liquid detergent. Like this, improved formula 4 and 5 can prevent the formation of gelling film on the surface of liquid detergent when it is opened in the air.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.105-116
• /
• 2019

Oil adsorption during hair or body washing is responsible for the hair conditioning. In this study, we established a method to extract oil from a substrate, and to determine amount of adsorbed oil upon substrate using a conventional absorption spectroscopy. We controlled the mole fraction of a surfactant in a mixture of anionic and amphoteric surfactants because that it induces the coacervate that regulates amount of adsorbed oil through the alteration of oil viscosity. Based on this, we established the optimized condition for adsorption and extraction for oil. UV absorbance were employed to estimate the amount of adsorbed oil using optical absorbance after extraction via adsorption. The estimation was confirmed by comparing with a mass analysis in HPLC and an adhesive energy in AFM. It has been proved that this method can be applied to all cases of oil adsorption from the results with various cationic polymers and a complex system of the polymers which regulate the oil adsorption.

• Clean Technology
• /
• v.15 no.1
• /
• pp.31-37
• /
• 2009

This study deals with the production process of activated carbons from the sewage sludge char by chemical activation reaction. KOH and NaOH were used as activating agents, which react well with carbon. From the experiments, it was found that activated carbons made with KOH treatment had better physicochemical properties in terms of iodine number and BET value than those made with NaOH treatment. It was also found that the optimal deposition ratio of an activating agent to the sewage sludge char was 75 wt% of KOH and 50 wt% of NaOH. Activated carbons were washed out by distilled water after neutralization with 5 M hydrochloric acid solution. The activated carbons that were produced from a sewage sludge char at this optimal conditions have BET surface areas of approximately $600m^2/g$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.761-767
• /
• 1996

To lessen the initial level of microorganisms, electrolyzed acid-water was used as washing and brine water in the manufacturing process. On the washing and salting processes, application of electrolyzed acid-water showed a possibility to lessen the microorganism level of Chinese cabbage effectively. Microbial level of Chinese cabbage was reduced to about 1/4 level by salting and washing process with electrolyzed acid-water while Chinese cabbage salted with tap water increased to about 1.7 times. And no coliform and E. coli were detected. However significant differences between seasoning mixtures prepared with electrolyzed acid-water and with tap water were not observed in microbial levels. Relatively low level of total count in kimchi prepared with electroyzed acid-water was kept until 15 days of fermentation at $10^{\circ}C.$ Any significant difference between them was not observed after 20 days of fermentation. pH and acidity were showed the same tendencies as microbial count.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1367-1374
• /
• 2001

본 논문은 무선 통신 시스템에 사용될 수 있는 저전력의 Cascaded Integrator-Comb(CIC) 필터 뱅크 구조를 제안한다. 필터 뱅크를 만들기 위해서 CIC 필터의 적분기 섹션을 변화시켜 구성하는 방법을 제안하였으며, 원하는 채널별 중심주파수를 정확히 맞추기 위하여 Modified CIC Filter(MCF)를 사용하는 방법을 제안하였다. 이 방법으로 채널별 중심주파수가 원하는 주파수에 위치하도록 필터 뱅크를 구현할 수 있음을 보였다. 또한 각 채널별 통과대역 주파수응답특성을 개선할 수 있는 새로운 Generalized Comb Filter(GCF)를 제안하였다. 한 개의 GCF와 두 개의 GCF를 각 채널에 적용하는 방법과 그때 통과대역의 주파수응답특성이 얼마나 향상되는지를 보였다. 또한 본 논문이 제안한 CIC 필터 뱅크와 일반 FIR 필터를 사용한 필터 뱅크의 구현 소자의 수를 비교하여 구조의 우수함을 입증하였다.