• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.294-299
• /
• 1994

CHF$_{3}$/CH$_{4}$Ar 플라즈마에 의해 형성된 산화막 식각 잔류물의 화학구조와 이 잔류물의 제거를 위한 세정방법을 x-ray photoelectron spectroscopy를 이용하여 조사하였다. 잔류무르이 구조는 CF$_{x}$-polymer와 Si-C, Si-O 결합으로 이루어진 SiO$_{y}$ C$_{z}$ 이었다. CF$_{4}$O$_{2}$ 플라즈마에 의한 silicon light etch는 산화막 식각 잔류물인 SiO$_{y}$ C$_{z}$ 층과 손상된 실리콘 표면을 제거하엿으며 NH$_{4}$OH-H$_{2}$O$_{2}$과 HF용액으로 완전히 제거되는 CF$_{x}$-polymer/SiO$_{x}$층을 남겼다. 100.angs.정도의 silicon light etch는 minority carrier life time과 thermal wave signal값을 초기 웨이퍼 수준까지 회복시켰으며 접합누설 전류도 거의 습식 식각 공정수준까지 감소시켰다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.132-133
• /
• 2007

반도체 소자의 제조 공정 기술이 발전하고 초고집적화가 됨에 따라 소자 선폭도 급속하게 감소하였다. 이로 인하여 기존의 식각 공정에서 식각 후 남은 잔여 Photoresist residue는 소자 생산에 큰 영향이 없었으나 현재 이러한 잔여물은 초고집적 소자에 치명적인 문제를 발생시킬 수 있다. 본 실험에서는 세정액 분자에 플라즈마 충격을 가하여 세정액을 활성화함으로써 기존의 세정액과의 세정능력을 비교 분석하였다.

• Journal of the Korean Vacuum Society
• /
• v.18 no.2
• /
• pp.97-101
• /
• 2009

In the modem semiconductor industry, the progress that consumes the most capital and labor is cleansing process. Cleansing process is to remove impurities that can affect the operation of the device and deteriorate its function. Especially, Photoresist (PR) progress that etches the device always requires cleansing at the end of the progress. Also, HDI-PR (High-Dose Ion-implanted Photoresist) created from PR progress is difficult to remove. Thus, in modem IC cleansing, many steps of cleansing are used, including dry and wet cleansing. In this paper, we suggested to combine existing dry-cleansing and wet-cleansing, each represented by plasma cleansing and stripper solution, as Plasma Liquid-Vapor Activation (PLVA). This PLVA method enhances the effect of existing cleansing solution, and decreases the amount of solution and time required to strip. We stripped HDI-PR by activated solution and measured surface hardness and Young's modulus by Nano-indenter. Nano-indenter is the equipment that determines the hardness and the modulus of elasticity by indenting nano-sized tip with specific shape into the surface and measuring weight and z-axis displacement. We measured the change of surface hardness and Young's modulus before and after the cleansing. As a result, we found out that the surface hardness of the sample sharply decreased after the cleansing by plasma-activated PR stripper solution. It can be considered that if physical surface-cleansing process is inserted after this, more effective elimination of HDI-PR is possible.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.19-22
• /
• 2007

반도체 산업은 회로의 고밀도화, 고집적화에 따라 웨이퍼 표면의 입자, 금속, 금속 이온, 유기물 등 오염물의 크기가 미세해 지고 세정에 대한 요구 조건이 더욱 엄격해지고 있다. 현재 세정 공정은 반도체 제조공정 전체에서 약 30%를 차지하고 있으며, 습식 세정 방식이 주로 사용되고 있다.[1] 습식 세정방식은 탈이온수로 린스하고 건조하는 공정이 필연적으로 따르며, 기판 표면에 건조과정에서 물반점이 남는 문제가 가장 큰 이슈로 남아 있다. 본 연구는 웨이퍼의 습식 세정 공정에 사용되는 DHF Final Clean Process후 IPA Vapor를 이용한 건조 방법을 기술 하였다. Single wafer spin process를 이용하였으며, 웨이퍼 Process 공간을 밀폐 후 N2가스를 충진하여 대기중의 산소 오염원 유입을 차단하고 수세 및 건조 가스를 이용하여 건조시킴으로써 SiFx의 SiOx로의 치환을 방지 하여 건조 효율 향상을 목적으로 한다. Bare 웨이퍼에서 65nm 이상 오염 발생 증가량을 측정 하였으며, 공정 후 웨이퍼 오염 발생량을 35개 이하로 확보 하였다.

• Journal of the Korean Vacuum Society
• /
• v.6 no.1
• /
• pp.9-19
• /
• 1997

The reaction mechanisms of dry cleaning with UV-excited chlorine radical for Zn, Fe and Ti trace contaminants on the Si wafer have been studied by SEM, AFM and XPS analyses in this work. The patterned Zn, Fe and Ti films were deposited on the Si wafer surface by thermal evaporation and changes in the surface morphology after dry cleaning with $Cl_2$and UV/$Cl_2$at $200^{\circ}C$ were studied by optical microscopy and SEM. In addition, changes in the surface roughness of Si wafer with the cleaning was observed by AFM. The chemical bonding states of the Zn, Fe and Ti deposited silicon surface were observed with in-line XPS analysis. Zn and Fe were easily cleaned in the form of volatile zinc-chloride and iron-chloride as verified by the surface morphology changes. Ti which forms involatile oxides was not easily removed at room temperature but was slightly removed by UV/$Cl_2$at elevated temperature of $200^{\circ}C$. It was also found that the surface roughness of the Si wafer increased after $Cl_2$and UV/$Cl_2$cleaning. Therefore, the metallic contaminants on the Si wafer can be easily removed at lower temperature without surface damage by a continuous process using wet cleaning followed by UV/$Cl_2$dry cleaning.

• Clean Technology
• /
• v.19 no.2
• /
• pp.184-188
• /
• 2013

To increase flash point which is related to flammability, seven unprecedented new cleaning agents containing fluoride atoms have been invented. These newly synthesized cleaning agents's physical properties which were conducted by Korea Institute of Petroleum Management by using a standard method showed excellent values. Particularly, flash point of newly synthetic cleaning agents is more higher than that of fluoride free compound. A specimen for cleaning ability was prepared by cutting in $60mm{\times}40mm$ size of stainless steel plate. The surface of the above specimens was applied with four kinds of contaminants, such as paraffin based drawing oil, flux abietic acid, water-insoluble cutting oil, and lubricating oil. Contaminated specimens were immersed in new compounds (1-7) for 1 to 5 minutes to dissolve oil in the cleaning agent. Although the data indicate that all compounds (1-7) exhibit lower cleaning ability toward cutting oil, it is observed that in the case of the present study more than 80% of pollutants on the surface were almost removed within 5 minutes.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.232-239
• /
• 2017

In this study, the regeneration investigation for waste reverse osmosis membrane filters which were discarded after use for the household water purifiers has been carried out. Sodium hydroxide, sodium bisulfate, and ethylenediamine tetra acetic acid(EDTA). as the chemical cleaning agents were used. And they were in-situ cleaned with the micro-bubble generator as well. The best result was obtained when both 0.1% EDTA and micro-bubbles were used for 30 min cleaning. Thus, when the performance of the brand new RO membrane and restorated RO membrane were compared, the flux, 19.9%, the recovery ratio 45% were enhanced while the salt rejection was reduced for NaCl 100 mg/L solution, in other words, it has been recovered to the original brand new RO membrane filter. Also the removal of pollutants on membrane surface was confirmed in a naked eye through the scanning electron microscopy. Finally, this research has provided the possibility of the re-use of the waste RO membrane filters of household water purifier which were reclaimed or incinerated after use.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.401-404
• /
• 2010

A spray-type cleaning agent in utilizing dust-remover on PCB was chosen to study. In cleaning of electronic and semiconductor equipment, a substrate(IPC-A-36) was used to test the jet forces of the agent. And according to the jet forces time of the cleaning agent, the corresponding moving distances were compared with the spray times, and for the pollutants of iron powder and dust, the cleaning efficiency was tested with the IPC-A-36 by a weight method. The moving distance increased with the spray cleaning time longer. For a spray cleaning time of 3sec, the cleaning efficiency decreased with the amount of dust and the iron powder. It was also observed that the dust was remarkably removed, compared to the iron powder.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.58.2-58.2
• /
• 2010

FPD (Flat Panel Display) 제조 공정에서 사용되는 패턴은 수 ${\mu}m$ 수준까지 감소하였으며, FPD의 크기는 급격하게 대형화 되여 현재 8세대(2200mm*2500mm)에 이르고 있다. 이에 따라, $1\;{\mu}m$ 이상의 크기를 갖는 오염입자에 의한 수율 저하를 극복하기 위한 세정효율의 향상 및 다량의 초순수 사용에 따른 폐수 발생으로 인한 환경오염, 또한 장비의 크기에 따른 공간 효용성 감소와 이에 따른 공정 비용의 증가 등의 어려움에 직면하고 있다. 따라서, 현장에서는 고효율, 저비용의 세정 공정 기술 개발에 대한 연구가 활발히 진행되고 있다. 이러한 문제점들을 해결 하고자 이류체 노즐 세정 장치와, 화학액 린스를 위한 초순수 Spray, 건조 공정에 해당하는 Air-knife, Halogen lamp로 구성된 소형화 된 고속 FPD(Flat Panel Display) 세정기에 대한 연구를 진행 하였다. 이류체 노즐은 초순수와 $N_2$ 가스를 내부에서 혼합하여 액적(Droplet)을 형성하여 고압으로 분사시키는 장치로서 화학액을 사용하지 않고 물리적인 방법으로 오염입자를 제거한다. Spray는 유기 오염입자 제거를 위한 오존수의 린스 공정을 위해 설치 하였다. 세정 후 표면에 남아있는 기판의 액막(water film)은 고압의 가스를 분사하는 Air-knife를 통해 제거하였으며, 고속 공정시 발생할 수 있는 Air-knife에서 제거하지 못한 잔류 액막을 Halogen lamp를 사용하여 효과적으로 제거함으로써, 물반점(water mark) 없는 건조 공정을 얻을 수 있었다. 실험에는 미세 입자의 정량적인 측정을 위하여 유리 기판 대신에 6인치 실리콘 웨이퍼(P-type (100))를 사용하였으며, > $\;1{\mu}m$ 실리카 입자를 스핀방식을 사용하여 정량적으로 균일하게 오염하였으며, 오염물의 개수 및 분포는 파티클 스캐너 (Surfscan 6200, KLA-Tancor, USA)를 사용하여 분포 및 개수를 정량적으로 측정 하였다. 이류체 노즐은 $N_2$ 가스의 압력과 초순수의 압력을 변화시켜 측정하여, 각각 0.20 MPa, 0.01 MPa에서 최적의 세정 결과를 얻을 수 있었으며, 건조 효율은 Air-Knife의 입사 각도와 건조면 간격, 할로겐 램프의 온도를 조절 하여 최적의 조건을 얻을 수 있었다.

• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.10-20
• /
• 2001

Since the feasibility for the application of laser to the conservation of artworks had been demonstrated by John F. Asmus at 1972 it was known from many experiments that laser cleaning technology Provided superior characteristics over conventional cleaning methods based on mechanical and chemical actions. Then, the research and development of the cleaning technology was carried out strongly in Europe and many successful cleaning applications such as stone, painting, stained glass, paper, leather, and metal have been reported. However this is not familiar as a cleaning tool in the restoration of artworks in oriental countries including Korea. Therefore, this article aims to introduce a laser cleaning technology and its characteristics for the applications to art restoration. The contents in this article include general principles and characteristics of laser, the introduction of laser cleaning technology, and real laser applications for artwork restoration.