• Investigative Magnetic Resonance Imaging
• /
• v.18 no.4
• /
• pp.352-356
• /
• 2014

A 51-year-old man developed anterograde amnesia following the ingestion of glufosinate ammonium. Brain MRI revealed hyperintense lesions involving the bilateral hippocampus and parahippocampal gyrus, and the right occipital lobe. The mechanism underlying acute glufosinate ammonium intoxication and the differential diagnosis of hippocampal lesions are discussed.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.276-287
• /
• 2010

This case report describes the treatment of a 23-year, 8-month-old female patient with a Class II malocclusion who showed severe bidentoalveolar protrusion and anterior crowding. The treatment plan consisted of extracting all the first premolars, decrowding and en masse retraction of the upper six anterior teeth and lower anteriors. The upper C-plate placed in the midpalatal area combined with lingual sheath fixtures were used as substitutes for posterior anchorage teeth during upper anterior retraction. Preadjusted brackets (0.022-inch) were used for upper anterior decrowding. A 0.9 mm diameter stainless steel lever-arm soldered to the main arch wire facilitated controlled retraction of upper anteriors. The upper and lower dentition was detailed using a tooth positioner during the finishing stage. Correct overbite and overjet were obtained by decrowding and retraction of the upper six anterior teeth into their proper positions. Use of the C-plate and lingual appliances provided ideal anchorage to enhance the improvement in facial balance. The active treatment period was 19 months. The treatment result was stable 13 months after debonding.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.330-336
• /
• 2015

Purpose: This study evaluated the effect of loss of interproximal papilla, creating an undercut, on the accuracy of impression materials. Materials and methods: Two addition type silicone impression materials ($Extrude^{(R)}$ Speed Wash, $Imprint^{TM}$ II Quick Step Light Body) and one alginate impression material (Cavex Impressional) were used to make impressions of a maxillary master model simulating clinical conditions with or without interproximal papilla. Stone was poured in the impressions and working casts were fabricated. A total of 6 groups with 6 working casts in each group were scanned using 3-dimensional optical scanner. The accuracy of the impressions was assessed by measuring the dimensional changes (${\Delta}I$ (%)) of 6 distances on working casts compared to a master model with a 3-dimensional digitizing and inspection software. The data were analyzed by two-way ANOVA (P<.05). Results: Three of 6 distances showed statistically significant differences among the impression materials. Only 1 of 6 distances in alginate impression showed a statistically significant difference between casts with and without interproximal papilla (P=.047). Conclusion: The presence of undercut due to loss of interproximal papilla did not significantly influence the dimensional accuracy of addition type silicone and alginate impression materials.

• Journal of the Korea Convergence Society
• /
• v.10 no.2
• /
• pp.195-200
• /
• 2019

The purpose of this study is to investigate the phenomenon of user's use of services, focusing on Skyscanner apps, and to suggest improvements to provide better user experience. The service described in this paper is complicated in booking ticket and deficient its usability at a certain age. As a result, three point of improvement is derived. Provide clear information and countermeasures. And make operating procedure be convenient to learn. It is significant that this study suggested ways to improve ticket reservation services through Skyscanner, a major online ticket reservation service. In the follow-up study, I expected that this study will help the various business models improve its system such as UI design, improvement of information structure, and Skyscanner for silver generation.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.141-147
• /
• 2002

I-PARK 삼성동 APT PROJECT는 무역센타에서 영동대교 사이의 구릉에 위치한 지상 46층의 주거용 건물로서 3개동 449세대로 구성되었고 각 동을 4세대 조합의 타워형으로 설계되었다. SLAB 구조 방식은 2방향 플랫 프레이트 구조(2WAY FLAT PLATE SLAB SYSTEM)로서 SLAB는 수직하중에 대한 기본적인 지지구조 역할 뿐만 아니라 주 골조 SYSTEM 구성 요소의 일부로서 풍하중 및 지진하중등의 횡력에 대하여 저항할 수 있는 구조로 구성되어 있다. 본 SLAB 구조 SYSTEM을 적용한 국내 최고 높은 건물로서 당 현장에 적용된 시공사례중 가설계획, 고강도 콘크리트, SYSTEM FORM, RE-BAR, 4-DAY CYCLE SCHEDULE 등에 대하여 기술하기로 한다.

• Journal of agricultural medicine and community health
• /
• v.43 no.2
• /
• pp.108-113
• /
• 2018

목적 글루포시네이트암모늄은 비선택성 제초제로 1984년 일본에서 개발되었으며, 급성 중독시에는 위장관계 증상뿐만 아니라 의식변화, 경련, 호흡부전 및 기억소실 등과 같은 다양한 임상증상을 보이는 것으로 알려져 있다. 한국에는 1994년 소개된 이후로 널리 사용되고 있으며, 사용량의 증가와함께 음독환자가 점점 증가하여 사회적 문제가 되고 있다. 저자들은 최근 글로포시네이트 중독 환자에서 초기치료 후 지연성 악화를 보였던 2례를 문헌고찰과 함께 보고하고자 한다. 방법 및 결과 첫 번째 증례는 62세의 남자환자로 음주상태에서 글루포시네이트암모늄 음독 후 의식 저하 상태로 발견되어 응급실로 이송되었다. 응급 위세척을 시행 후 보존적 치료 및 집중모니터링을 유지하였고, 의식수준은 6시간 후에 거의 명료한 상태로 호전되었다. 지연성 악화의 가능성에 대해설명하고 지속적인 경과관찰 및 치료를 위해 집중치료실 입원이 필요함에 대해 설명하였으나, 환자와 보호자는 타상급병원으로의 전원을 원하였다. 환자는 이송 중에 발생한 심폐정지로 심폐소생술을 시행하였으나, 회복되지 못하고 사망하였다. 두 번째 증례는 54세의 남자 환자로 글루포시네이트암모늄 음독 후 발생한 의식 변화로 응급실로 이송되었다. 내원시 의식은 혼미한 상태였으며 앞의 증례와 같이 응급 위세척을 시행하였다. 본 환자는 초기치료 후 본원 집중치료실에서 지속적인 혈액 및 생화학적 검사를 시행하였으며, 집중모니터링 및 치료를 유지하였다. 입원 2일째 혈액검사 소견은 호전 중이었으나, 경련이 발생하였으며 의식은 혼미한 상태가 지속되었다. 신경과 협진하여 뇌파검사를 시행 후 항경련제를 증량한 후로 경련은 발생하지 않았다. 입원 7일째에는 의식 수준은 거의 명료한 상태까지 호전되었다. 입원 13일째 혈액 및 생화학검사에서 약간의 혈색소 감소 외에는 정상소견을 보였으며, 뚜렷한 신경학적 합병증 없이 퇴원하였다. 결론 급성 글루포시네이트중독 환자는 매우 다양한 임상증상을 보이며 초기치료 후에 상태가 안정적이더라도 지연성으로 임상적 또는 신경학적 악화가 발생할 가능성이 있으므로 치료에 유의하여야 한다.

• Industry Promotion Research
• /
• v.9 no.3
• /
• pp.139-146
• /
• 2024

This study analyzed the popularity factors of the virtual idol 'PLAVE' to provide insights for future virtual idol production and content management in the domestic entertainment industry. Three hypotheses were established and tested through an online survey conducted from May 7 to May 20, 2024, with 73 participants. After excluding insincere responses, 67 responses were regression-analyzed. All three hypotheses, regarding character realism, 2D webtoon design, and real-time communication, were validated with P-values below 0.05. These findings offer strategic insights for the domestic entertainment industry and suggest a new paradigm for the virtual idol sector.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.225-236
• /
• 2001

In order to improve the properties of the copolymer and the terpolymer that was used as removal-type pressure sensitive adhesive(PSA), we synthesized quaterpolymer with the variation of the types of monomer, initiator, and solvent, and concentration, the monomer/solvent ratio, reaction temperature and time. and determined the properties of this adhesive: the viscosity, molecular weight, conversion, solid content and structure of polymer. The prepared polymer was crosslinked by changing the type of crosslinking agent and concentration, and then we investigated the characteristics or adhesive such as peel adhesion, shear adhesion, heat resistance, weathering resistance and peel adhesion to aging. The optimum performance of RA/2- EHA/MMA/2-HEMA as a PSA were obtained when benzoyl peroxide was used as an initiator with the reactant mixture consisted of 80% BA and 2-EHA, 15%, MMA, and 5% 2-HFMA. The optimum reaction temperature and time were $80^{\circ}C$ and 8 hours, respectively. For BA/2-EHA/MMA/AA, the optimum performance was obtained when the polymerization was performed at the monomer composition of 80% BA/2-EHA, 15% MMA, and 5% AA. BPO was used as initiator and the optimum reaction temperature and time were identical to those of BA/2-EHA/MMA/ 2-HEMA. Isocyanate and melamine were used to crosslink BA/2-EHA/MMA/2-HEMA and BA/2-EHA/MMA/AA, respectively. No effect on the type of cross-linking agent on the peel adhesion was observed with aging. The quarterpolymers crosslinked with melamine left residues on the counter surface after weathering resistance test, while the polymers crosslinked with isocyanate did not.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.243-249
• /
• 2014

We conducted investigations into the morphological characterstics and chemical compositions of the microlites included in the obsidians from the North Korean side Baekdusan (NK) and in the obsidian artefacts from the Busan Gadeokdo prehistoric site (BG). The morphology of the microlites from the NK can be divided into three groups, and trichite-acicular and trichite-asteroidal types are predominant. On the other hand the microlites from the BG show various morphological features such as acicular, margarite, lath, and asteroidal types. Silicate microlites from the NK are mostly of Ca-pyroxene compositions (hedenbergite to augite), whereas those from the BG are mostly of biotite (annite) with small amount of clinopyroxene (ferrosilite). It is well understood that the microlites from the NK are different from those from the BG in terms of the morphology, mineral content and mineral composition. Thus the obsidian aretefacts from the Busan Gadeokdo prehistoric site seem to have no genetical relationship to the obsidians from the Baekdusan.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.457-462
• /
• 2005

Polyurethane foams (PUFs) were prepared from polymeric 4,4'-diphenylmethane diisocyanate (PMDI), mixed polyol with OH value of 480, silicone surfactant, three catalysts, and hydrofluorocarbon(HFC) as blowing agent. Balance (PC-8), gelling (33LV), and trimerization (TMR-2) catalysts were used. The effect of the catalysts on the physical properties of PUF with increase of isocyanate (NCO) index and aging time was investigated. The cell size of the PUF with PC-8 and 33LV slightly increased with an increase in NCO index from 100 to 170 but compressive strength did not change significantly. In case of trimerization catalyst, the compressive strength of PUF increased from 8.75 to 1$10.5 kg_f/cm^2$ and the cell size decreased with an increase in NCO index. The compressive strength of the PUF with 33LV increased from 9.21 to $10.15 kg_f/cm^2$ with an increase in aging time. However, there was no detectable change in the compressive strength of PUF with TMR-2. A possible interpretation of the results includes an additional cross-link reaction of non-reacted MDI and FTIR spectrum illustrated the change of NCO peak.