• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.8
• /
• pp.223-230
• /
• 2021

The lightweight block cipher PIPO announced at ICISC'20 has been effectively implemented by applying the bit slice technique. In this paper, we propose a parallel optimal implementation of PIPO for ARM processors. The proposed implementation enables parallel encryption of 8-plaintexts and 16-plaintexts. The implementation targets the A10x fusion processor. On the target processor, the existing reference PIPO code has performance of 34.6 cpb and 44.7 cpb in 64/128 and 64/256 standards. Among the proposed methods, the general implementation has a performance of 12.0 cpb and 15.6 cpb in the 8-plaintexts 64/128 and 64/256 standards, and 6.3 cpb and 8.1 cpb in the 16-plaintexts 64/128 and 64/256 standards. Compared to the existing reference code implementation, the 8-plaintexts parallel implementation for each standard has about 65.3%, 66.4%, and the 16-plaintexts parallel implementation, about 81.8%, and 82.1% better performance. The register minimum alignment implementation shows performance of 8.2 cpb and 10.2 cpb in the 8-plaintexts 64/128 and 64/256 specifications, and 3.9 cpb and 4.8 cpb in the 16-plaintexts 64/128 and 64/256 specifications. Compared to the existing reference code implementation, the 8-plaintexts parallel implementation has improved performance by about 76.3% and 77.2%, and the 16-plaintext parallel implementation is about 88.7% and 89.3% higher for each standard.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.54-61
• /
• 2012

The WAVE specification, which for the Next-Generation ITS environment is a common title: IEEE 802.11p and IEEE P1609 specifications. These days, there are many activities for researching WAVE specification by release of the IEEE 802.11p specification. The difference between high-speed vehicle environment and the indoor environment, the wireless communication channel mode is that much more severe. Thus, the wireless communication system design, temperature, noise, multipath fading and can degrade the performance of the system points should be fully considered matters of. In this paper, we showed WAVE wireless communication system which based on IEEE 802.11p PHY/MAC design process, and also showed solving process many implementation problems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.4
• /
• pp.331-336
• /
• 2005

Recently, Japan has showed strong demand for protection of consumers against misleading specification provided by producers, establishing the committee for JIS and ISO. To protect domestic market and overcome potential subordinate relationship in overseas market, several universities and institutes in Korea have performed collaborative works on the standardization of test method f3r photocatalytic activity concerning the selected application fields. This article deals with the process and the result for the method of testing photocatalytic sol or suspended powder using optical fiber. Currently, this method is Intended for TiO2, but can be applied for various photocatalytic raw materials that can be activated by visible light and solar irradiation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.603-614
• /
• 2005

In this paper, digital ultra-narrowband Walky-Talky using direct conversion method for CQPSK modulation scheme is implemented with satisfying the requirements of APCO P25. RF transceiver design and implementation scheme that minimize the influence of DC-offset and AC-coupling at ultra-narrowband is proposed. This scheme also minimizes the influence of nonlinear characteristic at power amplifier fir CQPSK modulation method. Test results of full system including DSP module and direct conversion RF transceiver show that FCC emission mask at 36.8 dBm PEP meets the standard requirements. The characteristic of receiver AGC by PWM control signal is linear at 40 dB dynamic range and voice communication at input power level of -116 dBm is successful. Also it is verified that the performance of BER versus frequency offset and versus SNR meets the standard requirements.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.102-108
• /
• 2003

This paper presents a new Data acquisition system that can improve a accuracy and response characteristics by designing a SDAS(Signal Datat Acquisition System). I&C(Instrumentation and Control) system, which it applied for Nuclear Power Plant, affects for safety either directly or indirectly. It should be assessed by the equipment qualification procedure to confirm the functionality during design life before it apply on the nuclear power plant depending on safety classification. This paper proposes data acquisition system that required as an essential measurement equipment in the method and procedure of equipment qualification following of standards and codes of IEEE and Nuclear Regulatory Guide. It provides comparable and experimental studies have been carried out. The presented results from the above investigation show considerably improved accuracy performance in the data acquisition system. This circuit will be able to be used in high performance I&C system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.299-306
• /
• 2023

Environmental pollution problems are occurring due to the negative treatment of basalt waste in Jeju Island. This study identifies the characteristics of permeable block with basalt with physical and chemical adsorption mechanisms and examines their applicability and functionality as building materials. This experiment is basic data for evaluating the functionality of the permeable block by analyzing flexural strength, compressive strength, permeability coefficient, carbon dioxide, and fine dust adsorption rate by producing a permeable block using a basalt waste rock. As the basalt waste stone replacement rate increased, the flexural strength and compressive strength tended to decrease, and as the replacement rate increased, the water permeability coefficient, absorption rate, carbon dioxide, and fine dust adsorption rate tended to increase. Therefore, it is judged that the permeable block using the basalt waste rock is superior to the existing permeable block.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7B
• /
• pp.1226-1235
• /
• 2000

신호망에서의 지연은 망관리 행위의 응답시간에 직접적인 영향을 미치기 때문에 모든 제어정보는 가장 효과적으로 전송되어야 한다. 신호망이 효율적으로 운용되는지 뿐만 아니라 신호망의효과적인 설계를 위해서 신호시스템의 성능을 아는 것이 매우 중요하다. 본 논문에서는 공통선 신호 시스템의 신호망 기능부의 지연 성능을 분석하였다. 분석은 ITU-T 규격을 기반으로 다른 계층의 프로토콜에 독립적인 큐잉모델을 만들어 대기체계분석을 통하여 이루어졌다. 또한 신호망 기능부가 신호 메시지 처리부와 신호망 관리부로 나누어져 구성되는 것도 고려하여 모델링하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.302-308
• /
• 1991

최근 산업현장에서 작업능률의 향상, 인건비의 절감을 목적으로 공장자동화가 급속히 추진됨에 따라 자동화 설비의 핵심기기인 공압벨브의 수요가 급격히 증가하고 있다. 공압밸브는 전기적신호로 솔레노이드를 작동하여 공기의 흐름을 제어하는 것으로 기계와 전기가 결합된 Mechatronics화된 제품이다. 본 연구에서는 공압벨브류의 성능측정 분야 에 있어서 세계 각종규격(ISO, JIS, CETOP) 에 명기된 시험항목들을 자동으로 측정할 수 있는 종합성능 시험시스템을 개발하였고, 시스템의 작동은 한명의 작업자가 측정항목의 모든 시험을 제어할 수 있도록 완전자동화 하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.61-64
• /
• 2000

본 논문에서는 cdma2000 규격을 채용한 역방향 링크 동기식 DS-CDMA 시스템을 시뮬레이션 하여 시스템의 성능을 분석하려다 cdma2000 시스템은 기존의 IS-95와는 달리 Pilot 채널을 이용하여 페이딩 채널을 추정하고 이를 이용하여 채널 환경에 의한 수신신호의 위상변화를 보상해 준다. 채널 추정필이 31pcg 심볼에서 Pilot 채널과 Traffic 채널의 최적의 전력비를 구하였다. 또한 시스템에 Power Control을 적용하여 Target FER을 만족시키기 위한 required Eb/No를 구하였고, 서로 다른 데이터율의 사용자가 동시에 전송할 때의 성능을 분석하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.172-172
• /
• 2017

최근 급변하는 농촌인구 감소와 고령화로 인한 농업농촌의 경쟁력 향상을 위해 농업에 정보통신기술(ICT)을 접목한 스마트 팜 기술개발이 추진되고 있다. 현재 농촌진흥청에서는 한국형 스마트 팜 ICT 기자재 표준규격을 개발하고 단체 표준을 제정하고 있다. 개발된 시설원예용 기자재 중 센서 13종, 구동기 9종 그리고 환경제어용 3종 등 총 25종의 표준규격에 대한 검정이 요구되어, 표준규격 부합 여부를 객관적으로 확인하기 위한 검인증 체계 구축을 필요로 하게 되었으며 본 연구에서는 표준규격이 설정된 기자재에 대한 검인증방법과 계측시스템을 구성하여 검인증체계를 구축하고자 하였다. 센서 13종 중 온도센서는 비교시험을 하기위해 기준 온도센서가 정밀도는 $0.01^{\circ}C$, 정확도는 ${\pm}0.01^{\circ}C$를 갖는 것으로 선정하고 항온조는 작동범위가 온도는 $(-)50{\sim}(+)120^{\circ}C$, 습도는 (30 ~ 98)%R.H.로 조절이 되는 구조의 것으로 구성하여 기준센서와 오차정도를 산출하는 방법으로 실시할 것이며, 센서 인터페이스 등 구조는 T.T.A. 단체 표준에 적합여부를 확인하여 적합성 여부를 판단하고 현재까지 센서 13종과 구동기 9종에 대한 검정방법 제정을 추진하고 있다. 지금까지는 스마트 팜 중 시설원예용 기자재 표준규격 부합여부를 확인하는 수준이지만 향후 개별 성능확인 호환성 확인시험방법을 추가하여 고도화를 추진 하고자 한다.