• Membrane Journal
• /
• v.26 no.2
• /
• pp.141-145
• /
• 2016

Polymer electrolyte membranes (PEMs) are key components to determine electrochemical fuel cell performances, in addition to electrode materials. The PEMs need to satisfy selective transport behaviors to small molecules including gases and protons; the PEMs have to transport protons as fast as possible, while they should act as hydrogen barriers, since the permeated gas induces the thermal degradation of cathode catalyst, resulting in rapid electrochemical reduction. To date, limited tools have been used to measure how fast hydrogen gas permeates through PEMs (e.g., Constant volume/variable Pressure (time-lag) method). However, most of the measurements are conducted under vacuum where PEMs are fully dried. Otherwise, the obtained hydrogen permeance is easily changeable, which causes the measurement errors to be large. In this study, hydrogen permeation properties through Nafion212 used as a standard PEM are evaluated using an in-situ measurement system in which both temperature and humidity are controlled at the same time.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.3
• /
• pp.60-67
• /
• 2014

Exhaust system used in toilet and cooking place of high riser public house is roof fan of two basic types : natural roof ventilator and natural/forced roof ventilator. Natural/forced roof ventilator has a motor in the rotary shaft. There are many high riser public house in Korea. These buildings were not viewed as being major contributors to exhaust pollutants producted in indoor. It was because many engineers thought that exhaust in high riser building depend on stack effect. This study investigates on stack pressure determined by exterior pressure and the difference pressure control in exhaust stack used in high riser public house. This paper focuses mainly on the effect of the time interval for power supply of motor installed in roof fan with function of natural wind velocity and of exhaust air volume of toilet. It is observed there are higher exhaust efficiency than the existing natural roof ventilator.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.770-775
• /
• 2006

Biofilters packed with various materials commonly show problems such as low performance and clogging in a long-term operation. Recently, a bioactive foam reactor(BFR) using surfactants has been suggested to ensure efficient and stable VOCs removal performance. This study was mainly conducted to investigate the feasibility of the BFR system using styrene as a model compound. An abiotic md a biotic tests were conducted to estimate a mass transfer coefficient($K_La$) and a specific substrate utilization coefficient(k) for the BFR, showing the rate of mass transfer was greater in the BFR than in other diffuser systems. A dynamic loading test also indicated that the performance of the BFR was stable under a shock loading condition. Furthermore, the maximum elimination capacity of the BFR was determined to be 109 $g/m^3/hr$ for styrene, which was much higher than those for biofilter systems generally reported in the literature. Overall, the experimental results suggest that the BFR be a potential alternative to the conventional packed-bed biofilters.

• The Journal of the Korea Contents Association
• /
• v.3 no.4
• /
• pp.38-47
• /
• 2003

Distributed problem solving is the cooperative solution of problem by a decentralized and loosely couped collection of knowledge-sources (KS's), located in a number of distinct processor nodes. The contract net protocol has been developed to specify problem-solving communication and control for nodes in a distributed problem solver. Task distribution is affected by a negotiation process, a discussion carried on between nodes with tasks to be executed and nodes that may be able to execute tasks In this paper, we present the coordination method among distributed intrusion detection system and firewall by the contract net protocol. The method enhances the intrusion detection performance and provides the communication methods. To mode IDS and firewall, security models hue been hierarchically constructed based on the DEVS (Discrete Event system Specification) formalism. Each ID agent cooperates through the contract net protocol for detecting intrusions. The IDS which detects the intrusion informs to firewall, so the harmful network traffic is blocked. If an agent detects infusions, the agent transfers attacker's information to a firewall. Using this mechanism attacker's packets detected by In can be prevented from damaging the network.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.17-24
• /
• 2007

SIP-based tightly coupled conference, which has a centrally located conference server for controlling and management, can be classified several models according to location of focus and mixer. These are centralized server model, endpoint server model, media server component model and distributed mixing model. However each model has its strength and weakness. In this paper, we propose and implement a SIP-based effective hybrid-type conference model which decreases amount of SIP signaling messages, lowers load of server media mixer, and can be easily expandable to large scale conference. In this model, when the number of participants exceeds a pre-defined limit, the conference server selects some participants which posses specific functions and let them share functions of notifications of conference state event package and media mixing. When each participant subscribes conference state event package to the server, it can indicates its possession of such functions by a specific header message. The server stores the indication to the conference information database, and later uses it to select participants for load sharing. The performance of our proposed model is evaluated by experiments.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.34-41
• /
• 2007

The presence service which provides user's presence information by subscription and notification is one of SIP(session initiation protocol) extension services, and it is used importantly in VoIP(Voice over IP) and Instant Messaging service. In this paper, we propose a new method in which users can combine and control presence service and call processing services in various ways by extending call processing language, and only changed parts of the presence information are published instead of full presence information document. Each user registers full presence information document with his own call processing script during the first publication to a presence server. The presence server executes these call processing scripts, so it can provide various services with combination of presence service and call processing services during the presence subscriptions and notifications. Afterwards, users publish only changed parts of the presence information and the presence server notify only these changed parts to watchers. Therefore the efficiency of the overall system can be improved. The performance of our proposed model is evaluated by experiments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.72-84
• /
• 2016

The conventional brace system is generally accepted as the lateral load resisting system for steel structures due to efficient story drift control and economic feasibility. But lateral stiffness of the structure decreases when buckling happens to the brace in compression, so that it results in unstable structure with unstable hysteresis behavior through strength deterioration. Buckling restrained brace(BRB) system, in which steel core is confined by mortar/concrete-filled tube, represents stable behavior in the post-yield range because the core's buckling is restrained. So, seismic performance of BRB is much better than that of conventional brace system in point of energy absorption capacity, and it is applied the most in high seismicity regions as damper element. BRBs with various shaped-sections have been developed across the globe, but the shapes experimented in Korea are now quite limited. In this study, we considered built-up type of restraining member made up of precast reinforcement concrete and the steel core. we experimented the BRB according to AISC(2005) and evaluated seismic performances and hysteresis characteristics.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.81-90
• /
• 2020

A textile and capillary tube composite panel(TCP) was developed to simultaneously retrofit the seismic performance and the energy efficiency (e.g. heating or insulation performance) of existing unreinforced masonry (URM) buildings. TCP is a light-weight mortar panel in which carbon textile reinforcements and capillary tubes are embedded. Textile reinforcements plays a role of seismic retrofit and capillary tubes that hot water circulates contribute to the energy retrofit. In this paper, the static cyclic loading tests were performed on the masonry walls with/without TCP to understand the seismic retrofit effect of TCP retrofit and the results were summarized. The results of the test showed that the TCP contributed to increase the capacity of the Shear strength and ductility of the URM walls. In addition, the deformation of the wall after cracking was substantially controlled by the carbon textile.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.3
• /
• pp.216-223
• /
• 2005

A computer clock has limits in accuracy and precision affected by its inherent instability, the environment elements, the modification of users, and errors of the system. So the computer clock needs to be synchronized with a standard clock if the computer system requires the precise time processing. The purpose of synchronizing clocks is to provide a global time base throughout a distributed system. Once this time base exists, transactions among members of distributed system can be controlled based on time. This paper discusses the integrated approach to clock synchronization. An embedded system is considered for time synchronization based on the GPS(Global Positioning System) referenced time distribution model. The system uses GPS as standard reference time source and offers UTC(Universal Time Coordinated) through NTP(Network Time Protocol). A clock model is designed and adapted to keep stable time and to provide accurate standard time with precise resolution. Private MIB(Management Information Base) is defined for network management. Implementation results and performance analysis are also presented.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.73-80
• /
• 2003

The Java programming language is designed for developing effective applications in a heterogeneous network environment. Major problem in Java is its performance. many attractive features of Java make the development of software easy, but also make it expensive to support ; applications written in Java are often much slower than their counterparts written in C or C++. To use Java`s attractive features without the performance penalty, sophisticated optimizations and runtime systems are required. Optimising Java bytecode has several advantages. First, the bytecode is independent of any compiler that is used to generate it. Second, the bytecode optimization can be performed as a pre=pass to Just-In-Time(JIT) compilation. Many attractive features of Java make the development of software easy, but also make it expensive to support. The goal of this work is to develop automatic construction of code optimizer for Java bytecode. We`ve designed and implemented a Bytecode Optimizer that performs the peephole optimization, bytecode-specific optimization, and method-inlining techniques. Using the Classfile optimizer, we see up to 9% improvement in speed and about 20% size reduction in Java class files, when compared to average code using the interpreter alone.