• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.369-375
• /
• 2010

This paper presents a design and implementation of 3.3 kW on-board battery charger for electric vehicles or plug-in hybrid electric vehicles. Considering characteristics of the electric vehicles, a series-loaded resonant dc-dc converter and frequency control scheme are adopted to improve efficiency and reliability, and to reduce volume and cost. The developed on-board battery charger is designed and implemented by using high frequency of 80-130 kHz and zero voltage switching method. The experimental result indicates 92.5% of the maximum efficiency, 5.84 liters in volume, and 5.8kg in weight through optimal hardware design.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.71-76
• /
• 2003

Internet traffic is getting tremendously heavier due to the exponential growth of the Internet users, the spread of the E-commerce and the network games. High-speed routers for fast packet forwarding are commercially available to satisfy the growing bandwidth. A high-speed router, which has the decentralized multiprocessing architecture for IP and routing functions, consists of host processors, line interfaces and switch fabrics. In this paper, we propose a software architecture tuned for high-speed non-forwarding packet manipulation. IPCMP (Inter-Processor Communication Message Protocol), which is a mechanism for IPC (Inter-Processor Communication), is also proposed and implemented as well. Proposed IPC mechanism results in faster packet-processing rate by 10% as compared to the conventional IPC mechanism using UDP/IP.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1039-1048
• /
• 2005

A software configuration management(SCM) is essential for processing large scale project. The scope of SCM involves each developer's work space management, software building management, and development process control as wet] as version control. In this paper we focus on what parts should be controlled systematically for the optimized software build that is an important part of the SCM. We also analyze that to increase the efficiency of software build, what kind of configuration management information should be reported. Based on the analysis, we have actually designed and implemented a new reporting system and evaluated it. The evaluation includes comparative evaluation in efficiency based on the analysis about the related functions provided by existing tools and some additional qualitative evaluation through the questionnaires from stakeholders.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.539-545
• /
• 2016

In this paper, the use of an amplify-and-forward (AF) helper station in a cellular network with device-to-device (D2D) communication links is considered to enhance D2D rates and control the interference caused by D2D users to the cellular network. Two design criteria for the AF helper station are considered to improve the overall system quality-of-service (QoS). One is maximization of the worst D2D user rate under a constraint on interference caused by D2D users to the cellular network and the other is its dual, i.e., minimization of interference caused by D2D users to the cellular network with minimum rate guarantee for each D2D user. It is shown that the considered problems reduce to semi-definite programming (SDP) problems. Numerical results show that the proposed AF helper station significantly improves the system performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1011-1019
• /
• 2012

This paper presents a novel hybrid authentication scheme in the next-generation Tactical Mobile Communication Systems(TMCS) with wireless MSAP mesh networks. The existing centralized and distributed authentication methods for security between MSAPs may have their pros and cons. The centralized authentication method induces overhead from frequent MSAP association which leads to long authentication delay. On the other hand, the distributed authentication method requires initial sharing of the authentication information. Therefore, a more efficient authentication scheme is needed to protect the network from malicious MSAPs and also maximize efficiency of the network security. The proposed scheme provides a hybrid method of efficiently managing the authentication keys in the wireless MSAP mesh network to reduce the induced authentication message exchange overhead. Also, as the authentication method between MSAP and TMFT is different, a method of utilizing the ACR for handling the EAP packets is proposed. In overall, the proposed scheme provides efficient mutual authentication between MSAPs especially for tactical environments and is analyzed through performance evaluation to prove its superiority.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.659-669
• /
• 2010

The P2P IPTV will create a new paradigm for the Internet services. However, it cannot guarantee the reliability of their server and QoS because of using common Internet users(peers) for SIP server or relay server, though the infrastructural cost is low. This paper proposes the ISP-based P2P IPTV architecture which can solute the limitations of conventional P2P-based IPTV. In this model, ISP can build P2P overlay network with ISP servers and directly manage each server needed for session connection. So, the servers have higher performance and better reliability than previous one. Besides, robustness is improved because each sever is set by P2P overlay network. To evaluate the characteristics of the ISP-based P2P IPTV architecture, we simulate it for some parameters which are end-to-end streaming delay time, connection delay time and traffic amount. We compared the proposed architecture with the conventional P2P architecture about video service and confirmed that the performance of ISP-based P2P IPTV is better than conventional P2P based IPTV.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.144-150
• /
• 2020

This study examined the current status of ATE in the development stage of the domestic guided weapons field, including the re-establishment of automatic test equipment (ATE), and attempted to develop methods to verify the validity of ATE in the defense sector. This study includes methods for confirming the repeatability and reproducibility of newly manufactured or replaced ATE. An error injection test is required for validation in the development phase. And pre-inspection steps are required for validation. When developing ATE, the use of an international standard testing script language ensures efficient validation and SW reliability. This ensures interoperability between the main and test equipment, and the tester can secure a test system platform that supports standardized testing methods, which is considered to be effective in validating specific ATE for each weapon system.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.99.1-99.1
• /
• 2017

$TiO_2$는 기계적, 화학적 안정성이 높아 가혹한 화학적 환경 또는 고온 운전 조건에서 훌륭한 내구성을 보여주어 산업적으로 일찍이 널리 이용되어 왔다. 예를 들어, 염소발생 (chlorine evolution reaction) 또는 산소발생반응은 (oxygen evolution reaction) 염소 또는 산소 라디칼에 전극이 지속적으로 노출되기에 강한 내부식성을 지닌 전극재가 요구되었고, 그 결과 $TiO_2$를 골조로 한 불용성전극 (dimensionally stable anode)이 개발되어 이용되고 있다. 그러나, $TiO_2$는 절연성이 높은 금속 산화물 재료이기 때문에 넓은 표면적 획득 및 촉매제 사용을 통해 소재의 단점을 극복해야만 한다. 넓은 반응 표면적 획득의 한 방법으로써 전기화학적 양극산화 (electrochemical anodization)를 통한 $TiO_2$ 나노튜브 제조법은 경제적이면서도 구조 제어도 간편한 방법이다. $TiO_2$ 나노튜브는 100nm 전후의 기공 크기를 가짐과 동시에 매우 높은 종횡비를 지니고 있어 넓은 반응 표면적 획득에 특히 유리하다. 그러나, 이 높은 종횡비는 촉매 도입을 어렵게 하는 저해요소가 되기도 한다. 이러한 문제를 해결하기 위하여 다양한 방법들이 연구되었으나 대부분이 번거롭거나 비싼 후단공정을 필요로 한다. 본 연구에서는 $TiO_2$ 나노튜브에 촉매를 도핑하기 위한 간단한 전기화학적 방법으로, 단일공정 양극산화법 (single-step anodization)과 전압충격법 (potential shock), 그리고 저전압충격법 (under potential shock)을 연구하였으며 이에 적용 가능한 촉매제의 종류를 소개한다. 또한, 촉매의 성질에 따른 응용분야와 그 성능평가 결과를 제시한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.315-321
• /
• 2011

The CRT monitor display system for SONAR signal that are commonly used in ships or naval vessels uses vector scanning method. Therefore the processing circuits of the system is complex. Also because production had been shut down, the supply of parts is difficult as well as high-cost. FPGA -based embedded processor system is flexible to adapting to various applications because it makes simple processing circuits and its core is easily reconfigurable, and provides high speed performance in low-cost. In this paper, we describe an implementation of SONAR signal LCD display system using the FPGA embedded processor system to overcome some weakness of existing CRT system. By changing X-Y Deflection and CRT control blocks of current system into FPGA embedded processor system, our system provides the simplicity, flexibility and low-cost of system configuration, and also real-time acquisition and display of SONAR signal.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.82-86
• /
• 2016

This paper proposes a method for the immobilization of motorbike brakes in conjunction with near-field communication (NFC) technology in order to meet the increasing demand for security and convenience of motorbike drivers. We thought about the concept of wireless key, NFC security devices and automatic solenoid valve for setting the lock and unlock module. This paper propose the design and development of an innovative anti-theft alarm system for motorcycles using NFC smart devices based on RFID system, the basis of IoT and AES(advanced encryption standard) encryption Algorithm. The design concept is based on NFC communication strategy between the vehicle and owner. To do this concept, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.