• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.73-82
• /
• 2000

Conventional funding system for the university research projects is limited to a grant or subsidy type funding method which does not require an obligation of refund. Such a funding system is known as ideal one for the university research activities which in general is not a profit oriented activities. It is considered ideal in a sense that nonprofit oriented research activities gives more emphasis on creativity than on efficiency or practical value. A venture- business-start-up research activity can not be considered as a pure nonprofit oriented activities. It clearly gives more emphasis on efficiency and practical value than on creativity Recently a large portion of the venture-business-start-up research activities are carried out in the universities. When a conventional research funding system is applied to such a new type of research activities, it turned out that the success rate is much lower than expectancy. This is why a new and differentiated funding system is sought for such a new type of research activities. A funding system of loan type for a venture-business-start-up research activities is proposed herewith. A loan system naturally requires a pay back after the successful start up of the venture business. This loan system nay be considered that a business concept is grafted on a conventional funding system for the university research activities. This means that a rather loose or generous terms and conditions of the money loan case is introduced into this funding system to remedy the short comings of the intrinsic nonprofit nature of the university research activities. The point is how to improve the success rate and how to reduce the undesirable aspect of the conventional university research activities when it is practiced with the new type of research activities. After one and half year of practicing with the new funding system. it can not be asserted that a definitely positive results could be obtained. but a trend of desirable aspects could be observed such as low drop out rate. project selection efficiency, higher sense of responsibility. etc.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.40-47
• /
• 2014

Feasibility of utilizing unburned carbon residue in coal ash as a potential precursor for the production of activated carbon was assessed to seek for solution to recycle unburned carbon residue. The unburned carbon concentrate generated from the 4 stages of cleaner flotation has a grade of 87% carbon. The crystalline impurities in the concentrate included quartz and mullite. Unburned carbon had a low specific surface area of $10m^2/g$, which might be related to a high degree of coalification of domestic anthracite coal. Carbon particles were mostly porous and have a turbostratic structure. When 1g of carbon was activated with 6g of KOH powder, the highest specific surface area value of $670m^2/g$ was achieved. Low wettability of unburned carbon particles, which was resulted from high temperature combustion in a boiler, might cause poor pore formation when they were activated by KOH solution. The activated carbon produced in this study developed micropores, with an equivalent quality of general-purpose activated carbon made from coal. Hence, it is concluded that chemically treated unburned carbon can be used for water purification or an alternative to carbon black as it is.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1971-1978
• /
• 2009

This study investigated the adsorption of safflower yellow dye on wool protein fiber and the optimum dyeing conditions to test color reproducibility. In addition, the effects of mordants on dye adsorption, color, fastness, and photofading rate were also studied. The prepared dye in powder form was characterized with UV-vis spectroscopy and FT-IR spectrometric analysis. The color of dyed fabrics was characterized by CIE $L^*a^*b^*$ coordinates, H V/C, and K/S values. The color reproducibility of the dyed wool fabrics was examined. The amount of dye adsorption increased and also, the shade of the dyed wool fabrics became deeper and more saturated with increasing temperature, time, and dye concentration. The maximum color strength was obtained at pH 3.0. The shade of dyed wool fabrics ranged from light yellow to dark mustard yellow as the pH of the dye bath shifted from alkaline to acidic. Color reproducibility was reliable with color differences in the range of 0.53~1.75. Fastness to dry cleaning was relatively good at 4/5 rating irrespective of mordanting. Fe and Cu mordants showed the least color change of the dyed wool fabrics after exposure to light. Mordants did not contribute to improve dye uptake and color fastness, although they made variations in color tone. Safflower yellow dye can be used satisfactorily without mordants and will not cause damage to the environment.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.463-471
• /
• 2014

While poly(styrene)-based anion exchange membranes have the advantage like easy and simple manufacturing process, they also possess the disadvantage of poor durability due to their brittleness. Acrylonitrile-butadiene rubber was used here as an additive to make the membranes have improved flexibility and durability. For the preparation of the anion exchange membranes, a PP mesh substrate was immersed into monomer solutions with vinylbenzyl chloride, styrene, divinylbenzene and benzoyl peroxide, then thermally polymerized & crosslinked. The prepared membranes were subsequently post-aminated using trimethylamine to result in $-N+(CH_3)_3$ group-containing composite membranes. Various contents of vinylbenzyl chloride and acrylonitrile-butadiene rubber were investigated to optimize the membrane properties and the prepared membranes were evaluated in terms of water content, ion exchange capacity and electric resistance. It was found that the optimized composite membranes showed higher IEC and lower electric resistance than a commercial anion exchange membrane(AMX) and have excellent flexibility and durability.

• Journal of Internet Computing and Services
• /
• v.5 no.1
• /
• pp.67-84
• /
• 2004

Real-time database systems (RTDBS) are database systems whose transactions are associated with timing constraints such as deadlines. Therefore transaction needs to be completed by a certain deadline. Besides meeting timing constraints, a RTDBS needs to observe data consistency constraints as well. That is to say, unlike a conventional database system, whose main objective is to provide fast average response time, RTDBS may be evaluated based on how often transactions miss their deadline, the average lateness or tardiness of late transactions, the cost incurred in transactions missing their deadlines. Therefore, in RTDBS, transactions should be scheduled according to their criticalness and tightness of their deadlines, even If this means sacrificing fairness and system throughput, And It always must guarantee preceding process of the transaction with the higher priority. In this paper, we propose an efficient real-time scheduling algorithm (Multi-level EFDF) that alleviates problems of the existing real-time scheduling algorithms, a real-time concurrency control algorithm(2PL-FT) for firm and soft real-time transactions. And we compare the proposed 2PL F[ with AVCC in terms of the restarting ratio and the deadline missing ratio of transactions. We show through experiments that our algorithms achieve good performance over the other existing methods proposed earlier.

• The Journal of Engineering Geology
• /
• v.28 no.2
• /
• pp.217-246
• /
• 2018

During the selection and characterization of target formations in the Small-scale Offshore $CO_2$ Storage Demonstration Project in the Pohang Basin, we have carefully investigated the possibility of induced earthquakes and leakage of $CO_2$ during the injection, and have designed the storage processes to minimize these effects. However, people in Pohang city have a great concern on $CO_2$-injection-intrigued seismicity, since they have greatly suffered from the 5.4 magnitude earthquake on Nov. 15, 2017. The research team of the project performed an extensive self-investigation on the safety issues, especially on the possible $CO_2$ leakage from the target formation and induced earthquakes. The target formation is 10 km apart from the epicenter of the Pohang earthquake and the depth is also quite shallow, only 750 to 800 m from the sea bottom. The project performed a pilot injection in the target formation from Jan. 12 to Mar. 12, 2017, which implies that there are no direct correlation of the Pohang earthquake on Nov. 15, 2017. In addition, the $CO_2$ injection of the storage project does not fracture rock formations, instead, the supercritical $CO_2$ fluid replaces formation water in the pore space gradually. The self-investigation results show that there is almost no chance for the injection to induce significant earthquakes unless injection lasts for a very long time to build a very high pore pressure, which can be easily monitored. The amount of injected $CO_2$ in the project was around 100 metric-tonne that is irrelevant to the Pohang earthquake. The investigation result on long-term safety also shows that the induced earthquakes or the reactivation of existing faults can be prevented successfully when the injection pressure is controlled not to demage cap-rock formation nor exceed Coulomb stresses of existing faults. The project has been performing extensive studies on critical stress for fracturing neighboring formations, reactivation stress of existing faults, well-completion processes to minimize possible leakage, transport/leakage monitoring of injected $CO_2$, and operation procedures for ensuring the storage safety. These extensive studies showed that there will be little chance in $CO_2$ leakage that affects human life. In conclusion, the Small-scale Offshore $CO_2$ Storage Demonstration Project in the Pohang Basin would not cause any induced earthquakes nor signifiant $CO_2$ leakage that people can sense. The research team will give every effort to secure the safety of the storage site.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.2
• /
• pp.185-195
• /
• 2017

Two byproducts, brewer's spent grain (BSG; germinated rice and malt) and brewer's spent material (BSM; Achyranthes japonica Nakai), were collected during the manufacture of pilsner beer using A. japonica Nakai and germinated rice. Water extracts of BSG and BSM were prepared at different temperatures ($25^{\circ}C$, $60^{\circ}C$, and $100^{\circ}C$) for 5 h, and their nutritional and functional properties were investigated. ${\gamma}-Aminobutyric$ acid (GABA), saponin, and niacin contents were higher in extracts prepared at $60^{\circ}C$ for more than 3 h than the other extracts, whereas total polyphenol content, DPPH radical scavenging activity, and reducing power were higher in samples extracted at $100^{\circ}C$ for 1 h compared to the other ones. Overall, water extraction at $60^{\circ}C$ for 3 h was desirable to effectively collect both nutritional and functional components from BSG and BSM. Under these conditions, BSM extracts showed 4~18 times high niacin and folate contents, 1.4 times high total phenolic content, and 11~60 times high antioxidant activities compared to BSG extracts. This study shows that pilsner beer byproducts would be good sources of health beneficial components, especially GABA, saponin, water soluble vitamins, and polyphenolics.

• Korean Journal of Food Science and Technology
• /
• v.38 no.5
• /
• pp.609-614
• /
• 2006

Quality changes in mustard leaf kimchi were investigated during storage for 60 days at $5^{\circ}C$. As the storage period changed from 0 to 60 days, the pH and reducing sugar content of mustard leaf kimchi decreased, while the total acidity and hunter's color increased. The vitamin C content in mustard leaf kimchi decreased gradually from 10 to 30 days and then markedly increased after 40 days. The total dietary fiber content and antioxidative activity were significantly higher in fresh mustard leaf kimchi than in fermented kimchi. The major volatile components of mustard leaf and mustard leaf kimchi were determined to be allyl isothiocyanate, 3-butenyl isothiocyanate and phenylethyl isothiocyanate. The contents of allyl isothiocyanate and phenylethyl isothiocyanate, the two major functional components, in mustard leaf kimchi were determined to be 43.72 and $36.17\;{\mu}g/g$ dry weight basis, respectively.

• Journal of Gifted/Talented Education
• /
• v.23 no.3
• /
• pp.453-477
• /
• 2013

The intent of this study is to fully investigate the major issues and challenges related to characteristics of gifted children from multicultural families in Korea. The gifted students of multicultural families are currently categorized as disadvantaged gifted students, but they need to be defined more deeply and separately due to the continuous increase of multicultural families. Most culturally different gifted children have common problem such as integrating into Korean culture, often suffering from emotional problems and their parents' economic disadvantage. Due to these problems a variety of issues arise. First, culturally diverse talented students have problems due to the alienation and the lack of equal opportunity given to gifted children of multicultural families in need. Secondly, another issue is whether or not the selection of these students for a gifted and talented program is administered equally and fairly. Thirdly students and teachers may have difficulty forming relationships. Fourth, there is a dire need to address the issue of a lack of formal education policy. for these students. Fifth, the formulation of a gifted and talented program solely for multicultural students is necessary. Sixth, educating the parents of such students remains a critical challenge. Seventh, the last issue arises from a lack of research regarding the identity of multicultural gifted children in Korea. In this study, we discuss each of these issues in-depth. Additionally the future of Korean Multicultural Gifted selection, training in the field, school direction and it's implications are discussed.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.85-103
• /
• 2012

ISMP is a method of writing clearly the user requirements in the RFP(Request for Proposal) of the IS development projects. Unlike the conventional methods of RFP preparation that describe the user requirements of target systems in a rather superficial manner, ISMP systematically identifies the businesses needs and the status of information technology, analyzes in detail the user requirements, and defines in detail the specific functions of the target systems. By increasing the clarity of RFP, the scale and complexity of related businesses can be calculated accurately, many responding companies can prepare proposals clearly, and the level of fairness during the evaluation of many proposals can be improved, as well. Above all though, the problems that are posed as chronic challenges in this field, i.e., the misunderstanding and conflicts between the users and developers, excessive burden on developers, etc. can be resolved. This study is a case study that analyzes the execution process, execution accomplishment, problems, and the success factors of two pilot projects that introduced ISMP for the first time. ISMP performance procedures of actual site were verified, and how the user needs in the request for quote are described was examined. The satisfaction levels of ISMP RFP for quote were found to be high as compared to the conventional RFP. Although occurred were some problems such as RFP preparation difficulties, increased workload, etc. due to the lack of understanding and execution experience of ISMP, in overall, also occurred were some positive effects such as the establishment of the scope of target systems, improved information sharing and cooperation between the users and the developers, seamless communication between issuing customer corporations and IT service companies, reduction of changes in user requirements, etc. As a result of conducting action research type in-depth interviews on the persons in charge of actual work, factors were derived as ISMP success factors: prior consensus on the need for ISMP, the acquisition of execution resources resulting from the support of CEO and CIO, and the selection of specification level of the user requirements. The results of this study will provide useful site information to the corporations that are considering adopting ISMP and IT service firms, and present meaningful suggestions on the future study directions to researchers in the field of IT service competitive advantages.