• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.631-634
• /
• 2004

An experimental investigation on the strength and behaviour of reinforced concrete columns using high performance fiber reinforced cement composites has been carried out. The columns were subjected to monotonic axial compression until failure. The variables in this study are the combination ratio of steel cord(SCI) and polypropylene(PP), and the volumetric ratio of transverse reinforcement Test results showed that the fibers, when used in a hybrid form, could result in superior composite performance compared to their individual fiber reinforced cement composites.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.441-444
• /
• 2004

This paper presnets the tensile behavior of 8 high performance fiber-reinforced cementitious composites (HPFRCCs) members, each reinforced with one deformed bar 16mm in diameter. The variables included HPFRCC(Ductal, steel cord and polyethylene hybrid fiber, PE fiber) versus normal concrete. Fibers used in HPFRCC significantly increased tensile strength, ductility, and tension stiffening of cementitious materials. For HPFRCC, after first cracking, tensile load continue to rise without fracture localization. Sequentially developed parallel cracks contributed to the inelastic strain at increasing stress level. After yielding of the reinforcing bars, HPFRCC showed increases in loads with increasing strains.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.615-618
• /
• 2004

The primary role of fibers in High performance fiber reinforced cement composites(HPFRCCs) is to improve the toughness, or energy absorption capacity, of the composite material, However, there is still no general agreement as to how this toughness should be characterized, or how it might be used in the design of structures containing HPFRCCs. In this paper, therefore, we focus on test techniques for measuring flexural toughness. For mechanical properties, HPFRCCs can be tested in the same way as fiber reinforced concrete(FRC). Both the significance and the limitations of somewhat different national and industrial standards of FRC are discussed. For flexural toughness, with depend on the presence of fibers, new test methods was developed and verified. We also suggest evaluation method of tensile toughness indices using the moment curvature relationship in flexural tests.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.657-660
• /
• 2006

HPFRCCs(High performance fiber reinforced cementitious composites) exhibit characteristics of strain harding and multiple crack. These lead to improvement in ductility, toughness, and deformation capacity under compressive and tensile stress. These properties of HPFRCCs are affected by type of fiber, size of sand. Furthermore these influence compress strength and flexural strength. Therefore experimental study on the mechanical properties of HPFRCCs using PVA fiber was carried out. In this paper, HPFRCCs made of PVA fiber were tested with size of sand, strength of concrete to evaluate characteristics of compressive strength and flexural strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.229-232
• /
• 2006

The HPFRCCs show that the multiple crack propagation, high tensile strength and ductility due to the interfacial bonding of the fibers to the cement matrix. Moreover, performance of cement composites varies according to type and weight contents of reinforcing fiber. and HPFRCCs with hybrid fiber have better performance than HPFRCCs with single fiber in damage tolerance. Total four cylindrical specimens were tested, and the main variables were the type and weight contents of fiber, which was polyvinylalchol (PVA), polyethylene (PE). In order to clarify effect of hybrid types on the characteristics of fracture and damage process in cement composites, AE method was performed to detect micro-cracking in HPFRCCs under cyclic compression. Loading conditions of the uniaxial compression test were monotonic and cyclic loading. And from AE parameter value, it is found that the second and third compressive load cycles resulted in successive decrease of the amplitude as compared with the first compressive load cvcle.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.113-114
• /
• 2022

The purpose of this study is to identify the rear energy transfer amount and time delay capability of the protection panel that has been impated by a projectile and the protection panel reinforced the foam polypropylene on the rear of the fiber reinforced cement itious composites, and compared and analyzed the load resistance capacity, energy dissipation capacity, and impact delay capacity when dynamic extreme load were applied to the specimen.

• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.441-448
• /
• 2011

이 연구에서는 실리카퓸 및 수축 저감제, 팽창재, 고성능 감수제의 혼입을 변수로 한 초고성능 시멘트 복합체(UHPCC)의 초기 수축 거동을 평가하기 위하여 화학수축 및 자기수축 실험을 수행하고, 응결 측정 결과와 비교하여 UHPCC의 자기건조 시작 시점에 대하여 분석하였다. 실험 결과, 실리카퓸 및 수축 저감제는 초기 화학수축을 증가시키는 경향을 보였으며, 고성능 감수제는 시멘트와 배합수의 수화 반응을 지연시키고 화학수축을 저감시키는 것으로 나타났다. 수축 저감제와 팽창재를 조합하여 적용한 경우 약 49%의 자기수축 저감 효과를 보였으며, 팽창재는 경화를 촉진 시키는 것으로 나타났다. 또한 UHPCC는 다수의 섬유 혼입과 낮은 물-결합재비에 의해 초결 이전부터 자기건조 현상이 발생하는 것으로 나타났다.

• 교육시설 논문지
• /
• 제19권5호
• /
• pp.29-36
• /
• 2012

The goals of this study are to develop a sprayable strain-hardening cement composite (SHCC) and to investigate the potential of the sprayable SHCC for packing the joint between existing R/C building and seismic retrofit elements. This paper provides the procedure for the development of a sprayable SHCC, test results of fresh properties required to a sprayable SHCC, and mock-up test results of developed sprayable SHCC. Control mixture of polyvinyl alcohol (PVA) fiber-reinforced SHCC (PVA-SHCC) was predetermined based on available research results. The pumpability and sprayability of the SHCC mixture were depended on the fluid property of fresh SHCC mixture. In this study, the effects of admixtures such as AE agent and fly ash on the rheological and rebound properties of control SHCC mixture were investigated to determine a sprayable SHCC mixture. Flow values and air content during shotcreting procedure of sprayable SHCC were also evaluated. The results show that flow or flowability and amount of air of three SHCC mixtures decreased almost linearly according to shotcreting procedure from mixer to nozzle. And the pumpability and sprayability of mixture with AE agent and low amounts of fly ash were superior to the those of SHCC. Mock-up test result show that developed sprayable SHCC indicates much improved workability and shotcrete construction period than conventional method(nonshrinkage mortar).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.89-92
• /
• 2008

최근 빈번하게 발생되는 지진으로 인해 내진규정이 강화된 바 있으며, 국내에서도 인접 국가들의 지진피해 발생으로 인해 지진에 대한 안전지대가 될 수 없다는 인식이 고조되어 건축구조설계기준에 서의 내진규정이 강화되었다. 그러나 기존 비내진상세를 갖는 건축물을 해체하여 요구성능을 얻고자 하는 경우 경제적, 환경적 손실이 크므로 비내진상세를 갖는 라멘구조물을 끼움벽을 통해 보강하는 것이 합리적일 것이라 판단된다. 따라서 본 연구에서는 변형경화형 시멘트 복합체인 SHCC를 끼움벽에 적용하였으며, 일반배근 및 대각보강근에 따른 내진성능을 정량적으로 평가함으로써 SHCC 적용에 따른 배근상세 감소 및 시공성 향상을 꾀하고자 한다. 실험체는 1/3 축소모형의 프리캐스트 끼움벽으로 제작되었으며, 실험결과 다수의 미세균열이 발생하여 기존 콘크리트에서 발생되는 명확한 전단균열 및 급격한 내력저하는 발생하지 않았다. 이는 SHCC 내 혼입된 PVA 및 PE 섬유의 가교작용에 의한 것으로 벽체에 전달되는 횡하중에 의한 응력을 재분배했기 때문인 것으로 사료된다.

• 전기화학회지
• /
• 제13권3호
• /
• pp.181-185
• /
• 2010

전도성 고분자로 널리 알려진 폴리아닐린과 액체전해질의 핵심 재료인 이온성 액체와의 복합체를 형성시키고 이들의 물리적, 전기화학적인 특성을 조사되었다. 이미다졸늄 이온성 액체 (1-methyl-3-propylimidazolium iodide, PMI-I)에 비전도성 폴리아닐린 (Emeraldine Base)을 30 wt%이상 첨가하였을 때 준고형화 현상이 나타났고, 이온성 액체의 이미다졸늄 양이온의 방향족 고리와 폴리아닐린의 벤족기와의 ${\pi}-{\pi}$ 자기상호조립에 의한 약한 도핑작용을 통해 섬유상 구조를 나타내었으며, 전도도의 변화율은 80%이상 유지하였다.