• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.22-30
• /
• 2001

Composites with various layer constructions involving the ratio of S/P were produced from wood strands(S) and particles(P) (Cryptomeria japonica D.Don) to measure various Young's moduli and anisotropy by ultrasonics. As a result, static Young's moduli of composites were almost same as dynamic Young's moduli obtained from natural frequency. However, these were smaller than those evaluated from ultrasonic wave propagation velocity. The differences between propagation velocity of the parallel(${\parallel}$) and perpendicular(${\bot}$) in-plane direction resulted in a tendency of anisotropy. The tendency of anisotropy was larger in three-layer constructions than in seven-layer constructions. The differences of strand surface layers showed larger values than those of particle surface layers. Also, composites with higher weight ratio of strand had a tendency to propagate rapidly in each direction. In contrast to these results, the propagation velocity in the thickness direction had a tendency to propagate rapidly in composites with particle surface layers and the lower weight ratio of strand.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.182-189
• /
• 2010

The strengthening performance of FRPs(Fiber Reinforced Polymers) is directly affected by the environmental conditions such as freezing-thawing and moisture because FRPs are usually bonded on the concrete surface. It is, therefore, strongly required to evaluate a durability of bond between FRPs and concrete as well as FRP materials itself. The freezing-thawing resistance of FRPs is evaluated in this study with the variables of freezing-thawing conditions, types of FRP and freezing-thawing cycles. From the test results, it is found that tensile strength and pull-off strength of CFRP are not affected by the freezing-thawing. On the other hands, those of GFRP show a little degradation because of continuous water immersion during thawing process. But, cautions are needed on the bond durability between FRPs and concrete in case of continuous water supplying from adjacent to the concrete.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.37-43
• /
• 2019

This study investigated electrical conductivity, electromagnetic shielding effectiveness, and mechanical property to improve electromagnetic shielding performance of high performance fiber reinforced cementitious composites (HPFRCC). Steel fiber, steel slag and carbon black as a conductive material were incorporated into the HPFRCC mixes. In addition, 2% CNT solution which was produced by dispersing multi-wall carbon nanotube (MWCNT) into water was used as a conductive material. In the test results, electrical conductivity of HPFRCC specimens was very low except for the specimen incorporating 1% carbon black. Micro structure of cement matrix was changed as the curing time increased, which negatively affected the conductive network of HPFRCC. In case of HC1 specimen showing a conductive network (0.083 S/cm), the electrical conductivity of the specimen after being dried at $60^{\circ}C$ for 72 hours to exclude the effect of water on electrical conductivity was significantly reduced to 0.0003 S/cm. The most important parameter of electromagnetic shielding effect was found to be a steel fiber while the effect of carbon black and steel slag was very few. The correlation between electrical conductivity and electromagnetic shielding effect does not seem to be clear.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.4
• /
• pp.496-499
• /
• 1996

In order to develop the functional diet food, characteristics of chitosan and silk fibroin composite was designed. Chitosan extracted from a prawn and silk fibroin was prepared from silkworm. The silk fibroin was dissolved rapidly in the 8M LiBr at a temperature of more than 4$0^{\circ}C$. Amino acid composition of fibroin composite revealed the same pattern that of native silk fibroin and regenerated silk fibroin. Predominant amino acid of chitosan-fibroin composite contained glycine, alanine, serine, tyrosine, threonine, and glutamic acid in order. According to the basis on the infrared spectrum, chitosan-silk fibroin composite is not distinguished differents composite ratio of chitosan and silk fibroin.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.5-5
• /
• 2011

나노섬유를 제조하는 방법 중에는 상분리 현상을 이용한 방법, 자가 조립성을 이용한 방법, 템플레이트를 이용한 방법, 전기방사법이 있으며 특히 전기방사법은 연속적으로 균일한 나노섬유를 제조할 수 있다. 또한 전기방사법은 장비가 간단하며 고분자 blend ratio와 무기재료의 함량에 따라 뛰어난 특성을 나타내는 나노복합섬유를 만들 수 있다. 최근 식물에서 추출한 단백질을 전기방사법을 이용하여 나노입자 및 나노섬유를 제조하고 이를 의료 분야 등에 적용하기 위한 연구가 활발히 진행되고 있으며 이런 식물성 단백질은 동물성 단백질에 비하여 인체 적용이 용이하고 매장량이 풍부한 장점이 있다. 본 연구에서는 전기방사법을 이용하여 옥수수에서 추출한 단백질인 zein의 나노입자 및 나노섬유를 제조하였다. 또한 천연 추출물이 혼입된 복합 나노입자 및 나노섬유를 제조하여 zein이 가진 고유 특성 이외에 천연 추출물의 특성을 추가로 부여해서 더욱 발전된 나노입자 및 나노섬유를 제조하였다. 고분자 농도, 전압, 방사거리 등 다양한 공정변수를 조절하여 최적의 조건을 확립하였으며 제조된 나노입자 및 나노섬유는 field-emission type scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV/vis), fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC)를 이용하여 특성분석을 실시하였다.

• Applied Microscopy
• /
• v.34 no.2
• /
• pp.121-130
• /
• 2004

In this study, ultrastructural change of the bile duct fibroblast at infected rat with Clonorchis sinensis, and the distribution of lectin receptors and actin protein in cultured bile duct infected with Clonorchis sinensis. It explored using colloidal gold label complex with lectin WGA purified from wheat germ (Triticum vulgaris) and anti actin antibody purified actin (43 kDa) isolated from chicken back muscle. The lectin WGA with protein A gold complex labeled sections of the cultured fibroblast revealed gold particles specifically distributed on the multi vesicular form Golgi complex and cell surface of the fibroblast. The actin antibody with protein A gold complex labeled sections of the cultured fibroblast revealed gold particles specifically distributed on the cytoplasm of the fibroblast. Labeling of cultured fibroblast in rat bile duct infected with Clonorchis sinensis was then quantified and compared to that of cultured Fibroblast in Rat Bile duct. These results indicate that lectin WGA receptors are located in the multi vesicular form Golgi complex in the cytoplasm to the cytoplasmic process of the Rat bile duct fibroblast infected with Clonorchis sinensis. Therefore, the GlcNAc and NeuNac regions on the cell surface and cytoplasmic process appear to be functionally associated with cell-recognition and protection from other cell of the tissue, and linked with secretion and exocytosis of the fibroblst cytoplasm. GlcNAc and NeuNAc product in the multi vesicular form Golgi complex then it is transported to cell surface. Actin protein is many appears that infected fibroblast rather than normal fibroblast. The fibroblast of infected with Clonorchis sinensis are against of the physical and chemical stimulation. Then development of cytoplasmic process is relative some stimulation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.587-596
• /
• 2009

The fiber bridging model is the crucial factor to predict or analyze the tensile behavior of fiber reinforced cementitious composites. This paper presents the fiber bridging constitutive law considering the distribution of fiber inclined angle and the number of fibers in engineered cementitious composites. The distribution of fiber inclined angle and the number of fibers are measured and analyzed by the image processing technique. The fiber distribution are considerably different from those obtained by assuming two- or three-dimensional random distributions for the fiber inclined angle. The simulation of the uniaxial tension behavior was performed considering the distribution of fiber inclined angle and number of fibers measured by the sectional image analysis. The simulation results exhibit multiple cracking and strain hardening behavior that correspond well with test results.

• Composites Research
• /
• v.30 no.2
• /
• pp.108-115
• /
• 2017

Among several fabrication processes of $SiC_f/SiC$ composites, the chemical vapor infiltration (CVI) process has attractive advantages in manufacturing complex net-or near-net-shape components at relatively low temperatures, easily controlling the microstructure of the matrix and obtaining the highest SiC purity level. However, it has disadvantages in that the ratio of residual pores in matrix is higher than other processes and processing time is relatively long. To reduce the residual porosity, the whisker-growing-assisted CVI process, which is composed of whisker growth and matrix filling steps has been developed. The whiskers grown before matrix filling may serve to divide the large natural pores between the fibers or bundles so that the matrix can be effectively filled into the finely divided pores. In this paper, the fundamentals of the CVI process for preparation of $SiC_f/SiC$ composites and some experimental results prepared by CVI and whisker-growing-assisted CVI processes are briefly introduced.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.160-167
• /
• 2007

This paper proposes a model for the solutions predicting the coefficient of thermal expansion of composites including fiber-like shaped$(a_1>a_2=a_3)$ and disk-like shaped$(a_1=a_2>a_3)$ inclusions like two dimensional geometries, which was analyzed by one axis and a single aspect ratio, $(\rho_\alpha=a_1/a_3)$. The analysis follows the procedure developed for elastic moduli by using the Lee and Paul's approach. The effects of the aspect ratio on the coefficient of thermal expansion of composites containing aligned isotropic inclusions are examined. This model should be limited to analyze the composites with unidirectionally aligned inclusions and with complete binding to each other of both matrix and inclusions having homogeneous properties. The longitudinal coefficients of thermal expansion $\alpha_{11}$ decrease and approach the coefficient of thermal expansion of filler, as the aspect ratios increase. However, the transverse coefficients of thermal expansion $\alpha_{33}$ increase or decrease with the aspect ratios.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.15-39
• /
• 2019

An ultramafic complex occurs as an isolated lenticular body in the Andong area. The Andong ultramafic complex comprises ultramafic and mafic rocks, but mainly peridotites. The complex extends for several kilometer to ENE direction, adjacent to the Andong fault line. This study is for petrochemistry of the peridotites within the ultramafic complex and characteristics of asbestos occurrences. The peridotites are igneous origin, ranging from lherzolite to wehrlites and are characterized by high Fo olivine ($Fo_{0.85-0.87}$), Mg clinopyroxene ($Mg_{87.5-93.5}$), and tremolitic to tschermakitic hornblende. Geochemically, these rocks show high magnesium number (mainly Mg = 85.3-87.38) and transitional element and low alkali element contents. The peridotites host asbestos, including chrysotile, tremolite and actinolite asbestos, but dominated by amphibole asbestos. The amphibole asbestos are found along small fault face, and cleavage and fracture showing several cm to ten cm in width as slip and oblique fibers, while the chryostiles occur at cleavage and vein showing several mm-cm in width as cross and slip fibers. They are confirmed by PLM, XRD and SEM results. Overall characteristics of peridotites from the Andong ultramafic complex and occurrences of the asbestos are similar to those of worldwide orogenic related Alpine type ultramafic rocks and serpentinized ultramafic bodies in Chungnam, Korea, respectively.