• Investigative Magnetic Resonance Imaging
• /
• v.18 no.1
• /
• pp.34-42
• /
• 2014

Purpose : To evaluate the correlation of lesion-to-normal ratio (LNR) of signal intensity from double inversion recovery MR imaging and total choline-containing compound (tCho) resonance from single voxel MR spectroscopy in breast cancers. Materials and Methods: Between August 2008 and December 2009, 28 patients who were diagnosed as breast cancer and had undergone both double inversion recovery (DIR) MR imaging and MR spectroscopy (MRS) were included in this study. The signal intensities of the lesion (L) and ipsilateral normal breast tissue (N) were measured in region of interest of each breast cancer in DIR and contrast enhance MR image (CE-T1WI) to calculate the LNR value for each technique. MRS was performed using single-voxel MR spectroscopy. The height, width and area of tCho resonance were compared with each LNR of DIR and CE-T1WI. We used Pearson's correlation coefficient(r) for correlation analysis and the significance level was p=0.05. Results: There was no statistically significant correlation between LNR of CE-T1WI and height (r=-0.322, p=0.094), width (r=-0.233, p=0.232) and area (r=-0.309, p=0.109) of MRS tCho. There was no statistically significant correlation between LNR of DIR and height (r=0.067, p=0.735), width (r=-0.287, p=0.139) and area (r=0.012, p=0.953) of MRS tCho, either. The Pearson's correlation coefficient was 0.186 between LNRs of CET1WI and DIR (p=0.344). Conclusion: There was no statistically significant correlation between LNR of DIR and relative amount of tCho resonance of MRS.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.8-15
• /
• 2021

TiO2 has been used in various fields such as solar cells, dental implants, and photocatalysis, because it has high physical and chemical stability and is harmless to the body. TiO2 nanofibers which have a large specific surface area also show a good reactivity in bio-friendly products and excellent photocatalysis in air and water purification. To fabricate TiO2 nanofibers, an electrospinning method was used. To observe the diameter of TiO2 nanofibers with fabrication variables, the fabrication variables was divided into precursor composition variables and process variables and microstructure was analyzed. The concentrations of PVP (Polyvinylpyrrolidone) and TTIP (Titanium(IV) isopropoxide) were selected as precursor composition variables, and inflow velocity and voltage were also selected as process variables. Microstructure and crystal structure of TiO2 nanofibers were analyzed using FE-SEM (Field emission scanning electron microscope) and XRD (X-ray diffraction), respectively. As-spun TiO2 nanofibers with an average diameter of about 0.27 ㎛ to 1.31 ㎛ were transformed to anatase TiO2 nanofibers with an average diameter of about 0.22 ㎛ to 0.78 ㎛ after heat treatment of 3 hours at 450℃. Anatase TiO2 nanofibers with an average diameter of 0.22 ㎛ can be expected to improve the photocatalytic properties by increasing the specific surface area. To change the average diameter of TiO2 nanofibers, the control of precursor composition variables such as concentrations of PVP and TTIP is more efficient than the control of electrospinning process variables such as inflow velocity and voltage.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.560-566
• /
• 2004

To fabricate the continuously porous alumina bodies by multi-extrusion process, carbon powder and ethylene vinyl acetate were used as a pore forming agent and a binder, respectively. As the change of extrusion pass number, reduction ratio as well as the volume fraction of core and tube, the porous alumina bodies having various kind of pore size and porosity could be obtained. The porous bodies showed continuous pore shape, high specific surface as well as high bending strength, which were compared with those of commercial alumina bodies. In-vitro study was carried out using MG-63 osteoblast cells to investigate of their biocompatibility. As a result, the cells grew well on top and bottom as well as inside surface of pore. From the result of in-vivo study of 3-dimensional porous alumina bodies using rats, it was confirmed that any inflammatory response was not found in the subcutaneous tissue around porous body. Also the porous bodies removed from the rats were fully covered with well-developed fibrous tissues and showed the formation of new capillary blood vessels.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.52-57
• /
• 2023

This study is a basic research for the development of high performance flexible electrode material. To enhance its electrochemical property, CuO nanoparticles (CuO NPs) were introduced and dispersed on surface of CNT fiber through electrochemical deposition method. The CNT fiber/CuO NPs electrode was fabricated and applied to electrochemical non-enzymatic glucose sensor. Surface morphology and elemental composition of the CNT fiber/CuO NPs electrode was characterized by scanning electron microscope (SEM) with energy dispersive X-ray spectrometry (EDS). And its electrochemical characteristics were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry. The CNT fiber/CuO NPs electrode exhibited the good sensing performance for glucose detection such as high sensitivity, wide linear range, low detection limit and good selectivity due to synergetic effect of CNT fiber and CuO NPs. Based on the unique property of CNT fiber, CuO NPs were provide large surface area, enhanced electrocatalytic activity, efficient electron transport property. Therefore, it is expected to develop high performance flexible electrode materials using various nanomaterials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.719-727
• /
• 2008

The tensile and bond performance of GFRP rebar are different from those of conventional steel reinforcement. It requires some studies on concrete members reinforced with GFRP reinforcing bars to apply it to concrete structures. GFRP has some advantages such as high specific strength, low weight, non-corrosive nature, and disadvantage of larger deflection due to the lower modulus of elasticity than that of steel. Bridge deck is a preferred structure to apply FRP rebars due to the increase of flexural capacity by arching action. This paper focuses on the behavior of concrete bridge deck reinforced with newly developed GFRP rebars. A total of three real size bridge deck specimens were made and tested. Main variables are the type of reinforcing bar and reinforcement ratio. Static test was performed with the load of DB-24 level until failure. Test results were compared and analyzed with ultimate load, deflection behavior, crack pattern and width.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.43-43
• /
• 2001

원료의 저급화와 공정의 폐쇄화가 급속히 진행되고 있는 현재의 국내 제지산업 현황을 고려할 때 고품질의 제품을 저렴하게 생산하기 위해서는 화학첨가제의 효과적 활용기술 확립과 이를 통한 초지공정 wet end의 성공적 제어기술이 요청된다. 특히 환경보전과 환 경관련 규제에 부응하기 위하여 초지공정의 무방류화가 점차 가속화되고 있는 현 시점에 서 wet end의 효율적 관리를 위해서는 그 동안 개방형 wet end에서 적용되던 개념의 공 정관리의 한계를 극복할 수 있는 기술 개발이 필요하다. 공정의 폐쇄화에 따른 습부화학적 문제를 해결하기 위해서는 백수의 재활용에 따른 지료 화학적 특성을 평가하고 고분자전해질의 거동을 분석해야 한다. 보류향상제 혹은 탈수촉 진제로서 첨가된 고분자전해질은 그 기능을 수행하기 위해서는 섬유에 흡착이 이루어져 야 하므로 백수로 제조된 지료 내에서 고분자전해질의 흡착 특성을 파악하는 것은 습부에 서 일어나는 현상들에 대한 이해 및 효율적인 공정제어를 위한 첫 단계라 할 수 있다. 본 연구에서는 실험실적으로 제조된 백수를 이용하여 조성된 지료 내에서 양이온성 구 아 검의 흡착현상을 분석하였다. 본 연구에서는 폐쇄화의 기준으로 폐쇄화 정도(Level of C Closure ; LC)에 따라 실험을 수행하였다. 여기에서 LC란 총 사용된 물의 양에 대한 지료조성 시 사용되는 백수의 양을 백분율로 나타낸 것이다. 양이온성 구아 검의 흡착을 평가하기 위해 PhenoVsulfuric acid spectrophotometric method를 이용하여 펄프 슬 러리 상등액에 존재하는 미흡착된 양이온성 구아 검의 함량을 측정하였고. 양이온성 구아 검 이 섬유상에 흡착하였을 때 나타나는 섬유의 S-potential 변화와 펄프 상등액의 양이 온 요구량 변화를 평가하였으며 이들의 상관관계를 분석하였다.축력으로 변형시키는데 비해 도침은 단순히 압축 압력만을 종이에 가하는 것이 다르다고 볼 수 있는데, 라 이너지와 백상지가 같은 조건하에서 왜 이러한 큰 차이를 보이는 이유를 아직 알수 없다.해 동일한 공정 데이터들올 이용하여 보편적으로 사용하는 통계기법 중의 하나인 주성분회귀분석을 실시하였다. 주성분 분석은 여러 개의 반응변수에 대하여 얻어진 다변량 자료의 다차원적인 변 수들을 축소, 요약하는 차원의 단순화와 더불어 서로 상관되어있는 반응변수들 상호간 의 복잡한 구조를 분석하는 기법이다. 본 발표에서는 공정 자료를 활용하여 인공신경망 과 주성분분석을 통해 공정 트러블의 발생에 영향 하는 인자들을 보다 현실적으로 추 정하고, 그 대책을 모색함으로써 이를 최소화할 수 있는 방안을 소개하고자 한다.금 빛 용사 둥과 같은 표면처리를 할 경우임의 소재 표면에 도금 및 용 사에 용이한 재료를 오버레이용접시킨 후 표면처리를 함으로써 보다 고품질의 표면층을 얻기위한 시도가 이루어지고 있다. 따라서 국내, 외의 오버레이 용접기술의 적용현황 및 대표적인 적용사례, 오버레이 용접기술 및 용접재료의 개발현황 둥을 중심으로 살펴봄으로서 아직 국내에서는 널리 알려지지 않은 본 기 술의 활용을 넓이고자 한다. within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)로 이주된지 14일(日) 이후에 신장(腎臟)에서 수축된 것으로 나타났다. 30%o의 해수(海水)에 적응(適應)된 틸라피아의 평균 신사구체(腎絲球體)의 면적은 담수

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.598-603
• /
• 2015

In this study, electrochemical properties of pitch-based activated carbon fibers (ACFs) were investigated by different heat-treatment temperature of the pitch-based ACFs in order to improve the specific capacitance of electric double-layer capacitor (EDLC). The ACFs were prepared by different heat-treatment temperatures of 1050 and $1450^{\circ}C$, after activation with 4 M KOH at $800^{\circ}C$ using stabilized pitch fiber. The specific surface area of prepared ACFs increased from $828m^2/g$ to $987m^2/g$, also the micropore and mesopore volumes of prepared ACFs were increased. These results because pore was produced by desorbing oxygen and hydrogen elements within the ACFs, and pore size was increased by contraction ACFs by heat-treatment process. Because of the porous properties, the specific capacitance was increased from 73 F/g to 119 F/g using cyclic voltammetry with 1 M $H_2SO_4$ at scan rates of 5 mV/s.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.5
• /
• pp.685-696
• /
• 1999

Background : Idiopathic pulmonary fibrosis (IPF) is a diffuse inflammatory and fibrosing process that occurs within the interstitium and alveolus of the lung with invariably poor prognosis. The major problem in management of IPF results from the variable rate of disease progression and the difficulties in predicting the response to therapy. The purpose of this retrospective study was to evaluate the short-term efficacy of steroid and immunosuppressive therapy for IPF and to identify the pre-treatment determinants of favorable response. Method : Twenty patients of IPF were included. Diagnosis of IPF was proven by thoracoscopic lung biopsy and they were presumed to have active progressive disease. The baseline evaluation in these patients included clinical history, pulmonary function test, bronchoalveolar lavage (BAL), and chest high resolution computed tomography (HRCT). Fourteen patients received oral prednisolone treatment with initial dose of 1mg/kg/day for 8 to 12 weeks and then tapering to low-dose prednisolone (0.25mg/kg/day). Six patients who previously had experienced significant side effects to steroid received 2mg/kg/day of oral cyclophosphamide with or without low-dose prednisolone. Follow-up evaluation was performed after 6 months of therapy. If patients met more than one of followings, they were considered to be responders : (1) improvement of more than one grade in dyspnea index, (2) improvement in FVC or TLC more than 10% or improvement in DLco more than 20% (3) decreased extent of disease in chest HRCT findings. Result : One patient died of extrapulmonary cause after 3 month of therapy, and another patient gave up any further medical therapy due to side effect of steroid. Eventually medical records of 18 patients were analyzed. Nine of 18 patients were classified into responders and the other nine patients into nonresponders. The histopathologic diagnosis of the responders were all nonspecific interstitial pneumonia (NSIP) and that of nonresponders were all usual interstitial pneumonia (UIP) (p<0.001). The other significant differences between the two groups were female predominance (p<0.01), smoking history (p<0.001), severe grade of dyspnea (p<0.05), lymphocytosis in BAL fluid ($23.8{\pm}16.3%$ vs $7.8{\pm}3.6%$, p<0.05), and less honeycombing in chest HRCT findings (0% vs $9.2{\pm}2.3%$, p<0.001). Conclusion : Our results suggest that patients with histopathologic diagnosis of NSIP or lymphocytosis in BAL fluid are more likely to respond to steroid or immunosuppressive therapy. Clinical results in large numbers of IPF patients will be required to identify the independent variables.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.92-94
• /
• 2003

The standard cultured sheet grafts for large full-thickness burn wound has been tempered by weak points such as long culture periods, difficulty in handling the fragile sheets, high costs and the detachment of the skin cells from the culture dishes by enzymatic digestion. Here we report on a new technique of using skin cells cultured on spherical microcarriers for skin regeneration. We cultured the human skin cells on biodegradable polymer microcarriers and transplanted onto wounds in the back of nude mice. After 21 days, histological examination showed the regeneration of epithelium. The technique developed in this study overcomes the drawbacks of the current artificial skin grafts, and could be utilized as an efficient skin wound regeneration therapy.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.4
• /
• pp.91-98
• /
• 2000

The present study is the first attempt involving quantification of the different types of debris found on the seabed of Chinhae Bay in the South Sea of Korea. Eleven cruises were undertaken to collect marine debris samples by bottom trawling from February in 1998 to January in 1999. The tows were conducted over a period of 60-90 min, and eight types of debris were counted: plastic, fishing gear, metallic objects, wood, rubber or leather, glass, textile and the others. Results are obtained based on the number and weight of the objects classified as per eight categories and station for a trawling period. The results of this study are that the number and weight of debris found per unit of swept area (1 hectare) were surveyed as 27.8(1,612 in total) and 3,130 g(193,820 g in total), and plastic and fishing gear have the most composition of marine debris by number, on the other hand, metallic objects and fishing gear have the most composition of marine debris by weight.