• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.242-248
• /
• 2017

This study was conducted to develop a cylindrical paperpot manufacturing equipment which is capable of continuously producing paperpots with a constant size. The equipment consists of the soil supply part, the paper supply part, the pot manufacturing part, the paperpot cutting part and its process for manufacturing paperpot from the soil supply to the paperpot cutting is continuously performed. As a result of the performance test using this equipment, we suggest that the optimal moisture content and injection pressure to supply soil are 50%~60%, and 0.5 Mpa respectively. Moreover the appropriate temperature for adhesive strength is $150{\sim}160^{\circ}C$ taking into account the performance of device and adhesion time. Also, considering the cutting speed and safety, it is appropriate to adopt a straight blade having a clean plan at a minimum angle of $30^{\circ}$. In addition, the manufacturing capacity of the developed equipment was 3300 pots per hour.

• Proceedings of the Korean Society of Community Living Science Conference
• /
• 2009.09a
• /
• pp.95-95
• /
• 2009

우리나라를 비롯한 동양문화권에서는 천연 약용식물자원의 이용을 통하여 전통적으로 지역 보건향상을 도모해 왔으며 최근 성인병과 난치병 해결을 위한 대체의학에 대한 관심이 증가하면서 약용식물자원을 이용한 건강기능식품 분야가 주목되고 있다. 약용식물자원은 민간에서 약선음식 등에 널리 활용되고 있지만 원료 농산물을 그대로 이용하는 수준으로 광범위한 적용성을 가지는 약선식품용 소재화 기술개발은 약용식물자원의 소비촉진에 크게 기여할 것으로 기대된다. 본 연구에서는 약선식품용 식품소재 개발의 일환으로 약용식물자원의 배합비와 추출물의 제형이 품질특성에 미치는 영향을 조사하였다. 스트레스 경감기능을 보유하는 약용식물자원은 고문헌에 기초하여 선정하였으며 약선원리에 따라 소정의 조건으로 3종(CLP 1, CLP 2, CLP 3) 배합비를 설정하였다. 추출물은 온도를 달리한 열수에 추출하고 유동Ext, 분무건조분말 및 과립으로 제형화 하였고 품질특성은 폴리페놀함량, 용해도, 투과도 및 색도특성을 분석하였다. 약용식물자원 혼합 추출물의 수율은 CLP 2가 65%로 가장 많았으며 1차 추출에서 76%의 수율을 보였고 추출시간대비 수율은 상업적 추출의 경우가 가장 높았다. 유동 Ext의 폴리페놀함량은 CLP 2가 g 당 11~13 mg을 함유하여 가장 많았고 CLP1과 CLP 2는 동등한 수준을 나타냈다. 유동 Ext는 99%의 용해도를 보였으며 투과도는 CLP 3가 52~68%로 가장 낮았으며 추출조건에 따라 색도가 차이가 있었다. 분말형태의 경우 폴리페놀 함량은 분무건조로 제조한 CLIP 2가 15.40mg/g으로 가장 많았다. 부형제로 과립화한 CLP 3가 g당 1.7 mg으로 가장 적었다. 분무건조분말은 98~99%의 용해도를 보였으며 부형제를 사용하여 분무건조하거나 과립화한 시료는 투과도와 명도가 높았으며 적색도와 황색도 및 갈색도가 낮았다. 이상의 결과는 약용식물자원 혼합 추출물은 원료의 조합비와 추출물의 제형은 식품소재화에 따른 품질특성의 영향인자로 작용함을 나타낸다.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.50-59
• /
• 2010

Four fire scenarios, as the cases of fire sizes of 2 MW and 5 MW, and no installation and activation of atrium fire shutter for dormitory building of Daegu 'D college', were developed and fire simulations were run using FDS (ver. 5.5.0) and Pathfinder 2009 programs. By assessing fire and evacuation, the effects of atrium fire shutter and vents on the smoke control of atrium were evaluated and this study also analyzed fire hazard and egress safety for occupants in the dormitory. Fire shutter's preventing smoke transport around atrium was much effective, but smoke layer descended down the design limit of smoke height and kept about 2 m height from the atrium floor in all cases because flow rate through vents was not enough. For the case of 5 MW fire and no fire shutter, fire hazard was higher due to visibility than temperature and allowable egress time to stairwell was short less than 5 seconds for the occupants on the floors of 4F to 7F. For total occupants, egress time out of main doorway was calculated about 136 seconds. It is sure that additional systems improving the performance of smoke control need to be installed for more safe evacuation.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.743-749
• /
• 1996

This study was carried out to investigate the microencapsulatuion of ${\omega}-3$ fatty acid isolated from fish oil and to obtain fundamental information on the utilization of the ${\omega}-3$ fatty acid in the dairy foods field. To obtain the desirable microencapsulation efficiency, 1.5% agar and 0.5% gelatin were used as coating materials, and 0.5% SFAN 60 (HLB 4.5 value) was used to maintain the emulsion stability. The optimal mixing ratio of coating material to core material was 8:2 (w/w). The thermostability of microencapsulated product was not maintained above $60^{\circ}C$. Microencapsulation efficiency was kept at about 90% at $4^{\circ}C$ and $10^{\circ}C$ for 7 days storage at various temperatures. At $20^{\circ}C$ and $30^{\circ}C$, however, about 80% microencapsulatuion efficiency was obtained for 3 days storage. About 80.57% microcapsule was destroyed by 1%> pepsin solution at $37^{\circ}C$ for 10 min.

• Management & Information Systems Review
• /
• v.37 no.2
• /
• pp.169-185
• /
• 2018

Customers are not merely responders but rather active value creators. As a result most researches related to customer value creation behavior focus on customer participation behavior and interaction between service provider and customer. This study set the research model to examine the correlation between customer to customer interaction, brand attachment and customer value creation behavior. For this study, the relationship among social support, C-to-C social interaction, similarity, brand attachment, and customer value creation behavior were modelled and used to validate our hypotheses. A path model was verified with structural equation modeling using dataset from survey. Results of this study are summarized as follows. First, this study show the C-to-C social interaction, such as social support, C-to-C social interaction, similarity have effects on brand attachment. Thus, this was statistically significant although dismissed from hypothesis verification. Second, the structural correlation shows brand attachment has positive effect on customer value creation behavior The findings suggest that managers need to identify and pay attention to positive customer to customer interaction in the service encounter so that it influence customer brand attachment and customer value creation behavior which is the competitive advantages of service brand.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.176-184
• /
• 2017

To interpret the seismic image precisely, random noises should be suppressed and the continuity of the image should be enhanced by using the appropriate smoothing techniques. Structure-Oriented Filter-Edge Preserving (SOF-EP) technique is one of the methods, that have been actively researched and used until now, to efficiently smooth seismic data while preserving the continuity of signal. This technique is based on the principle that diffusion occurs from large amplitude to small one. In a continuous structure such as a horizontal layer, diffusion or smoothing is operated along the layer, thereby increasing the continuity of layers and eliminating random noise. In addition, diffusion or smoothing across boundaries at discontinuous structures such as faults can be avoided by employing the continuity decision factor. Accordingly, the precision of the smoothing technique can be improved. However, in the case of the structure-oriented semblance technique, which has been used to calculate the continuity factor, it takes lots of time depending on the size of the filter and data. In this study, we first implemented the SOF-EP method and confirmed its effectiveness by applying it step by step to the field data. Next, we proposed and applied the corner response method which can efficiently calculate the continuity decision factor instead of structure-oriented semblance. As a result, we could confirm that the computation time can be reduced by about 6,000 times or more by applying the corner response method.

• 한국해양학회지
• /
• v.28 no.3
• /
• pp.241-258
• /
• 1993

To investigate the sedimentary environments on the coastal areas of Imja to Nakweol islands which show very complex shorelines and several zonal sand ridges in NE-SW direction, southwestern coast of Korea, a total of forty samples were taken by a grab sampler and sedimentological and micropaleontological studies on those samples were carried out. The present study area are classified into muddy sandy gravel, sand, city sand, sandy silt and silt facies. With statistical moment parameters such as mean, sorting, skewness and ketosis for the sediments in the study area, the sediments are generally categorized as shallow sedimentary facies. The characters that are observed in quartz grains among the sandy sediments of the study area imply the existence of high energy environments, temporal exposures in atmosphere and the mixing of clastic sediments of the several different origins. In the sediments of the study area, one genera belonging to six silicoflagellata species and five genera belonging to five nannoplankton species were detected. On the basis of the micro-organism assemblage, the study area seems to be influenced by active reworking dominantly under warm water masses. In addition, organic matter ad carbonate contents in the sediments did not show a definite relation with the occurrences of the micro-organisms in the study area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.73-79
• /
• 2006

Aeration is the most important and indispensable operation unit for the treatment of swine manure using aerobic liquid-composting process. The composting of swine manure depends on biological treatment process, but the highly concentrated ammonia nitrogen is required a pretreatment to expect the appropriate efficiency of the biological treatment process. In this study, pilot experiments have been carried out to estimate of the fit condition about ammonia stripping process as a pretreatment to aerobic liquid- composting. pH adjustment with $Ca(OH)_2$ was economically superior to use of NaOH and optimum pH of ammonia stripping was 12.3, ammonia nitorgen was rapidly removed as pH were increased at $$35^{\circ}C$$. When air stripping is performed before aerobic liquid-stripping, a high initial pH is required for complete ammonia removal and is additional effects such as organic substances, phosphorus, turbidity, and color removal. Stripping process was very efficient in the pretreatment of highly concentrated ammonia nitrogen for composting of swine manure. Emission rate of gaseous ammonia was $0.5355mole\;s^{-1}$ at initial time and $0.0253mole\;s^{-1}$ at finitial time. The fit condition of ammonia stripping in this study were at the temperature of $$35^{\circ}C$$, and the pH of 12.3 during 48 hours.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.65-70
• /
• 2008

The mechanical shear strength of BGA(Ball Grid Array) solder joints under high impact loading was investigated. The Sn-37Pb solder balls with a diameter of $500{\mu}m$ were placed on the pads of FR-4 substrates with ENIG(Electroless Nickel Immersion Gold) surface treatment and reflowed. For the High Temperature Storage(HTS) test, the samples were aged a constant testing temperature of $120^{\circ}C$ for up to 250h. After the HTS test, high speed shear tests with various shear speed of 0.01, 0.1, 1, 3 m/s were conducted. $Ni_3Sn_4$ intermetallic compound(IMC) layer was observed at the solder/Ni-P interface and thickness of IMC was increased with aging process. The shear strength increased with increasing shear speed. The fracture surfaces of solder joints showed various fracture modes dependent on shear speed and aging time. Fracture mode was changed from ductile fracture to brittle fracture with increasing shear speed.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.613-620
• /
• 2013

Concrete has been recognized as a material which is resistant to high temperatures, but chemicophysical property of concrete is changed by the high temperature. So, mechanical properties of concrete may be reduced. Because of this, standards and researches on the degradation of the mechanical properties of concrete at high temperatures have been presented. However, research data about the state that considering the loading condition and high-strength concrete is not much. Therefore, this study evaluated the high-temperature properties of high-strength concrete by loading condition and elevated temperature. The stress-strain, strain at peak stress, compressive strength, elastic modulus, thermal strain and the transient creep are evaluated under the non-loading and $0.25f_{cu}$ loading conditions on high strength concrete of W/B 12.5%, 14.5% and 20%. Result of the experiment, decrease in compressive strength due to high temperature becomes larger as the compressive strength increases, and residual rate of elastic modulus and compressive strength is high by the shrinkage caused by loading and thermal expansion due to high temperature are offset from each other, at a temperature above $500^{\circ}C$.