Browse > Article
http://dx.doi.org/10.4334/JKCI.2013.25.6.613

Evaluation of Properties of 80, 130, 180 MPa High Strength Concrete at High Temperature with Heating and Loading  

Choe, Gyeong-Cheol (Dept. of Architectural Engineering, Chungnam National University)
Yoon, Min-Ho (Dept. of Architectural Engineering, Chungnam National University)
Lee, Tae-Gyu (Dept. of Architectural Engineering, Chungnam National University)
Lee, Seong-Hun (Samsung C&T Corporation)
Kim, Gyu-Yong (Dept. of Architectural Engineering, Chungnam National University)
Publication Information
Journal of the Korea Concrete Institute / v.25, no.6, 2013 , pp. 613-620 More about this Journal
Abstract
Concrete has been recognized as a material which is resistant to high temperatures, but chemicophysical property of concrete is changed by the high temperature. So, mechanical properties of concrete may be reduced. Because of this, standards and researches on the degradation of the mechanical properties of concrete at high temperatures have been presented. However, research data about the state that considering the loading condition and high-strength concrete is not much. Therefore, this study evaluated the high-temperature properties of high-strength concrete by loading condition and elevated temperature. The stress-strain, strain at peak stress, compressive strength, elastic modulus, thermal strain and the transient creep are evaluated under the non-loading and $0.25f_{cu}$ loading conditions on high strength concrete of W/B 12.5%, 14.5% and 20%. Result of the experiment, decrease in compressive strength due to high temperature becomes larger as the compressive strength increases, and residual rate of elastic modulus and compressive strength is high by the shrinkage caused by loading and thermal expansion due to high temperature are offset from each other, at a temperature above $500^{\circ}C$.
Keywords
high strength concrete; residual compressive strength; residual elastic modulus; thermal strain; transient creep;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Franssen, J. M. and Dotreppe, J. C., "Fire Test and Calculation Methods for Circular Concrete Columns," Fire Technology, Vol. 39, Issue 1, 2003, pp. 89-97. (doi: http://dx.doi.org/10.1023/A:1021783311892)   DOI   ScienceOn
2 Kalifa, P., Menneteau, F. D., and Quenard, D., "Spalling and Pore Pressure in HPC at High Temperatures," Cement and Concrete Research, Vol. 30, Issue 12, 2000, pp. 1915-1927.   DOI   ScienceOn
3 Notification No. 2008-334 of Ministry of Land in Korea, Management Standard for Fire Resistance of Concrete Column and Beam, 2008, pp. 1-9.
4 Kalifa, P., Chene, G., and Galle, C., "High-Temperature Behaviour of HPC with Polypropylene Fibres from Spalling to Microstructure," Cement and Concrete Research, Vol. 31, Issue 10, 2001, pp. 1487-1499.   DOI   ScienceOn
5 Song, H., Hyung, W. G., Do, J. Y., and Soh, Y. S., "Explosive Spalling Dependent on Compressive Strength and Moisture Content of High Strength Concrete including Silica Fume," Journal of Architectural Institute of Korea, Vol. 20, No. 9, 2004, pp. 111-117.   과학기술학회마을
6 Ko, J. W., Ryu, D. W., and Noguchi, T., "The Spalling Mechanism of High-Strength Concrete under Fire," Magazine of Concrete, Vol. 63, Issue 5, 2011, pp. 357-370. (doi: http://dx.doi.org/10.1680/macr.10.00002)   DOI   ScienceOn
7 Hertz, K. D., "Limits of Spalling of Fire-Exposed Concrete," Fire Safety Journal, Vol. 38, Issue 2, 2003, pp. 103-116.   DOI   ScienceOn
8 Fu, Y. and Li, L., "Study on Mechanism of Thermal Spalling in Concrete Exposed to Elevated Temperature," Material and Structures, Vol.44, Issue 1, 2011, pp. 361-376. (doi: http://dx.doi.org/10.1617/s11527-010-9632-6   DOI   ScienceOn
9 Comites Euro-International Du Beton, Fire Design of Concrete Structures-in Accordance with CEB/FIP Model Code 90 (Final Draft), CEB Bulletin D'Information No. 208, July, 1991, Lausanne, Switzerland, pp. 33-48.
10 Comite Europeen de Normalisation (CEN), BS EN Eurocode 2: Design of Concrete Structures, Part 1-2: Structural Fire Design, 2004, pp. 19-32.
11 Kodur, V. K. R. and Sultan, M., "Effect of Temperature on Thermal Properties of High-Strength Concrete," Journal of Materials in Civil Engineering, ASCE, Vol. 15, No. 2, 2003, pp. 101-107. (doi: http://dx.doi.org/10.1061/(ASCE)0899-1561(2003)15:2(101))   DOI   ScienceOn
12 Kodur, V. K. R. and Lie, T. T., "Fire Resistance of Fibre-Reinforced Concrete," Fibre Reinforced Concrete: Present and the Future, Canadian Society of Civil Engineers, 1998, pp. 189-213.
13 Sullivan, P. J. E. and Sharshar, R., "Performance of Concrete at Elevated Temperatures (as Measured by the Reduction in Compressive Strength)," Fire Technology, Vol. 28, No. 3, 1992, pp. 351-359.
14 Hertz, K. D., "Concrete Strength for Fire Safety Design," Magazine of Concrete Research, Vol. 57, No. 8, 2005, pp. 445-453. (doi: http://dx.doi.org/10.1680/macr.2005.57.8.445)   DOI   ScienceOn
15 RILEM Technical Committee, Recommendation: Part 7-Transient Creep, Materials and Structures, 1998, pp. 290-295.
16 Phan, L. T., "High-Strength Concrete at High Temperature- An Overview," Utilization of High Strength/High Performance Concrete, 6th International Symposium Proceedings, Vol. 1. 2002, pp. 501-518.
17 Anderberg, Y. and Thelandersson, S., "Stress and Deformation Characteristics of Concrete at High Temperature: Part 2 Experimental Investigation and Material Behaviour Model," Bulletin, University of Lund, Sweden, Vol. 54, 1976, pp. 1-84.
18 RILEM Technical Committee, Recommendation: Part 6-Thermal Strain, Materials and Structures, 1997, pp. 17-21.