• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.245-250
• /
• 2017

From the instant of installation and operation, power cables start deteriorating. Cable systems can be maintained not only by monitoring the insulation status of the insulation layer and oversheath, but also the insulation status of the terminal and junction in high-voltage power cables. When the cable system (the cable itself and cable junctions combined) deteriorates, fire accidents happen due to dielectric breakdowns. We have invented a device to monitor the deteriorating status of cables, and installed it at Korea Western Power Co. Ltd. located in Taean, Chungcheongnam-do Province. In this paper, we present the results obtained using our device, through analysing and calculating the standard deviation of leakage current from cable insulators attached to the cables. When the standard deviation of analysed leakage current falls below a critical value, a cable system is deemed to be operating safely. But when the standard deviation of analysed leakage current is larger than the critical value, the insulation status of the terminal and junction in the cable system is considered to have seriously deteriorated. The terminal and junction in the relevant system should then be replaced preemptively in order to prevent blackout accidents of cables caused by the suspension of power supply.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.169-178
• /
• 2018

Gyeongin Port has low awareness, insufficient hinterland infrastructures, and lower competitiveness. So, in this study, we conducted Fuzzy-IPA analysis reflecting the recognition of the consignor companies that are using Gyeongin port to suggest present practical improvement measures for the activation of the operation of Gyeongin port hereafter. As a result of the analysis, three factors, that is, cargo loading/unloading/storage costs, port facility fees, and incentive and support were derived as priority investment areas. Three factors, that is, cargo safety, infrastructure equipment, and inland transportation costs were derived as the areas for maintenance strengthening and factors related to cargo handling and service factors were derived as areas for maintenance of the status quo and areas for gradual improvement, respectively. This study is significant in that it analyzed the recognition of the consignor companies that are using Gyeongin port using a quantifying method and suggested realizable measures for activation based on the results of the analysis. In future studies, the frequency of ships' calling at the port and measures to diversify the sea routes should be additionally reflected on the analysis.

• Korean journal of communication and information
• /
• v.46
• /
• pp.627-670
• /
• 2009

This study analyzed Korean Fair Trade Commission's judgemental cases of cartels in telecommunications and media industry and presented the following results. First, cartels were formed frequently in multi-channel broadcasting industry, telecommunications industry, movie industry, and newspaper industry. In addition, price-fixing were observed in almost all subfield of telecommunications and media industry. Second, administrative guidance facilitated more opportunities for collusion in the telecommunications industry than in the media industry. Third, the telecommunications and media industry, similar to overall domestic industries, had a high proportion of hard-core cartels. Fourth, the depth of judgemental case in evaluating agreements among competitors was generally low, even though detail evaluations were found in the cases of large fines. Fifth, the overall level of sanctions was relatively low.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.34-39
• /
• 2010

The purpose of this study is to suggest objective evaluation model as a plan to utilize as opportunity in establishing judgment standard of mutual inspection criteria and to upgrade inspection ability by reviewing and analyzing level of danger and importance in advance based on inspection results of inspection institutions regarding tower cranes used in construction fields. Tower crane is a mechanical device transporting construction supplies and heavy materials to places over 20~150M high from the ground for the period ranging from a short time of 2~3 months to two years after being installed in construction sites in vicinity of buildings or structures and is an important facility indispensable for construction sites. However, since use period after installation is short and professional technical ability of technicians working on-site about of tower crane is poor, systematic and quantitative safety management is not carried out As a part of researches on procedure of RBI(Risk Based Inspection) possible to apply to Knowledge Based System based on knowledge and experiences of experts as well as to tower cranes for solving these problems, quantitative RPN(Risk Priority Number) was applied to RPN utilizing technique of FMEA(Failure Mode and Effect Analyses). When general RBI 80/20 Rule was applied parts with high level of risks were found out as wire rope, hoist up/down safety device, reduction gear, and etc. However, since there are still many insufficient parts as risk analyses of tower crane were not established, it is necessary for experts with sufficient experiences and knowledge to supplement active RBI techniques and continuous researches on tower cranes by sharing and setting up data base of important information with this study as a starting point.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.471-480
• /
• 2020

Although the domestic industrial accidents have been decreased gradually, deaths in the construction sites have been occupied 49.9 percent of the total industry and deaths from fall accident have been accounted for 59.7 percent of the construction industry. In order to prevent fall accident, various safety activities and policy have been carried out. However, the impact on the domestic construction industry was inadequate. On the other hand, in advanced countries, such as the United States, Japan, EU, and Singapore Industrial accidents have been lower than domestic industry due to safety activities, the regulations and policies appropriate for each country's situation. In this study, we compare the major points of the Industrial Safety and Health Act in developed countries with those in South Korea to reduce the number of falls, and propose a revision. As a result of conducting research, three revisions have been proposed as 1) Enhance standards for fall height, 2) Improvement of upper safety rail height on guardrail, 3) Revision and research on Horizontal Sarety bar attachment system. This study will be utilized as a basic study for the analysis of cases in advanced countries.

• Clean Technology
• /
• v.20 no.4
• /
• pp.439-448
• /
• 2014

The potential mitigation of greenhouse gas (GHG) is studied in the Pohang steel industrial complex (PHSIC). The total GHG emission in 2010 is estimated to be in the range from 4,174,000 to 4,574,000 $tCO_2-eq$ in PHSIC. To meet the target proposed by the government, it is needed to reduce 552,000 $tCO_2-eq$ at minium by 2020. To estimate the potential amount of GHG reduction, the technologies used in the voluntary carbon reduction projects are applied to 51 companies which are subject to GHG target management. From the viewpoint of technological availability and payback period, the fuel conversion and waste heat recovery have an advantage in the short term with a possibility to reduce 160,000 $tCO_2-eq$. In the mid term, the thermal technologies in steel and iron industry have the potential to cut 229,000 $tCO_2-eq$, while the electrical technologies have the potential of 125,000 $tCO_2-eq$ reduction. The gap between the target GHG mitigation and potential reduction using the short and mid term technologies is about 38,000 $tCO_2-eq$, which should be compensated by the fundamental process innovation and the implementation of the most cutting-edge technologies including renewable energy.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.121-130
• /
• 2008

In line with the enhanced weight and variety of electronic commerce in business activities, new type of payment settlement and banking system which will enable to store, create and transfer values from the existing method of payment settlement is highly required. Cyber Banking system draws strong attention being the solution of there requirements. The existing Cyber Banking system has the difficulty of operation, administration, in addition to the problem of initial facility investment of big amount, resulted from the usage of the current business process. As the existing Cyber Bank system is unable to carry out the function of storing, creating, and transferring values due to the adoption conventional credit card system instead of the application of non-stop payment system between the seller and buyer. As a result, current Cyber Bank system still imply the deficiency of non-performing cash payment function on internet. This paper describes (1) an integrated application process, One Process One Input (OPOI) which is essential for software development of the Cyber Bank, (2) an application process of payment settlement system to be applied to the electronic commerce in Internet. And then, with these for a basis, (3) design and implementation of payment settlement system through CyberBank for Electronic Commerce. Consequently, by means of this suggested process, we could attempt to solve the problem of existing Cyber Bank system and further to explore the possibility of advanced Cyber Banking being the non-stop payment settlement system. The effectiveness of this suggested system has been practically confirmed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.623-629
• /
• 2018

Smart Factory is a concept of automatic production system of machines by the fusion of ICT and manufacturing. As a base technology for realizing such a smart factory, there is an increasing interest in a low-power environmentally friendly LED lighting system, and researches on so-called optical ID related application technologies such as communication using a LED and position recognition are actively underway. In this paper, We have proposed a system that can reliably identify logistics location and additional information without being affected by electromagnetic interference such as high voltage, high current, and generator in the plant. Through the basic experiment, we confirmed the applicability of the color ID recognition rate from 98.8% to 93.8% according to the eight color variations in the short distance.

• Journal of Information Management
• /
• v.40 no.3
• /
• pp.125-150
• /
• 2009

This study aims to investigate current situation and improvement method of correctional facility libraries in Korea. Thus this study made the following suggestions to improve the operation of correctional facility library and to facilitate its growth so that the inmates' basic right to know and access information could be guaranteed: First, there should institutional and legal grounds for the establishment and operation of correctional facility library such as standards, guidelines, and enactments; second, the government should provide enough budgets for human and material resources so that a prison library can equip itself with materials, facilities, and staff to run smoothly; third, the inmates' free access to the library service should be guaranteed in an open space; fourth, the library should introduce an automation system for lending, returning, and handling materials; fifth, a collaboration system with external resources should be set up to make effective use of lacking resources; sixth, programs should be researched and developed to analyze the size and composition of the inmates, the needs of the inmates, and available service; and finally, there should be staff with the qualification of a librarian to be responsible for the operation and management of a correctional facility library and to offer specialized library service to the inmates.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.3
• /
• pp.323-335
• /
• 2020

In this study, a series of site measurement of particulate and gases pollutants at five tunnels were carried out along with case studies to review the suitability of the current road tunnel ventilation design standards. Previous studies by other researchers have shown that the ratios of the level of measurement to the standard were 27.9%, 1.6% and 3.4% for TSP, CO and NOx, respectively. Those measured in this site study shows even lower ratios; the ratios were 2.6%, 0.8% and 0.3%, for TSP, CO and NOx, respectively. The particle size analysis of TSP for the five tunnels shows that PM10 including tire wear and re-suspended road dust exceeded 20.4%. This implies that non-exhaust particulate matter must be taken into account, since the current design standards for the particulate matter (visibility) include only the engine emission. Based on the recent research results, for vehicle emission rate and slope-speed correction factors, revision of ventilation design standards for pollutants is required. WRA (PIARC) also emphasizes the necessity of the ventilation design standards for pollutants. In addition, enactment of a new road tunnel ventilation system operation standard or guideline is strongly recommended when considering the low operating rate of the ventilation system with jet-fans.