• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.57-62
• /
• 2004

본 연구에서는 3전극 면방전 AC PDP의 ADS 구동방식에서 구동펄스 인가조건에 따른 어드레스 방전과 표시 방전간의 영향을 실험적으로 해석하고 휘도특성에 대해 알아보았다. 어드레스 방전을 위한 최소의 어드레스 펄스폭은 $1.5{\mu}s$이며 전압마진은 35V이다. 표시방전을 위한 최소 표시방전유지 펄스폭은 $2{\mu}s$이며 전압마진은 25V이다. 이때 최대 휘도를 위한 표시방전 전압은 190V이며 표시방전 펄스의 개수가 1024개일 때 얻어진 평균휘도는 $310[cd/m^2]$이다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.70-73
• /
• 2007

생활수준의 향상으로 인하여 조명 및 디스플레이 제품을 이용하여 건물 및 건축물에 대하여 장식을 하는 것이 일반화 되어가고 있다. 본 연구에서는 옥외 및 옥내에 사인물로 사용되어지고 있으며 설치가 간편한 디스플레이 조명기기인 LED Tile을 개발하여 옥내 및 옥외용 디스플레이 조명 시장의 시장성 확보하기 위하여, 광학설계를 통한 고휘도 LED의 선정 및 배치, 케이스 설계를 실시하고 LED모듈에 AC 220V 전원을 직접 인가할 수 있으며 효율이 높고 최적화된 구동회로를 설계하였다. 또한 One Chip 마이크로컨트롤러를 사용하여 RGB LED의 광색가변 및 점멸 제어회로를 설계하고, LED 모듈간에 2개의 제어선만을 연결하여 다양하고 다이나믹한 패턴 동작(점멸, 광색가변)이 가능하도록 펌웨어를 설계하였다. 그 결과 설계된 LED Tile은 전체 크기가 $D130{\times}W130{\times}H50mm$로 매우 컴팩트하고 LED 배치 및 광학설계를 통하여 최대광도 60cd를 실현하였으며, LED Tile의 동작개수에 관계없이 설치가 간단하며 10개 이상의 디스플레이 패턴 제어가 가능하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.10-11
• /
• 2003

NRD(Nonradiative Dielectric) 가이드 내 누설파(leaky wave)를 줄이기 위해 최근 주기 구조를 도입한 모델이 제안되었다. 그러나 NRD 가이드 내의 주기구조에 대한 상세한 특성 해석은 아직 이루어지지 않았다. 따라서 본 논문에서는 FDTD(Finite Difference Time Domain) 기법을 이용하여 주기 구조를 삽입한 NRD 가이드의 전파 특성을 해석하고자 한다. 해석 결과는 주기 구조의 모델 변화. 즉 공기층의 크기, 간격 개수 등에 따라서 누설이 어떻게 변화하는 지를 보여준다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.8
• /
• pp.80-87
• /
• 2006

This paper analyzed the characteristics of the claw pole PM stewing motor by using 3D FEM. As the magnetization occurs along the z-axis of the motor, it is necessary to apply 3D FEM for analysis of the claw pole PM stewing motor. Considering the computation time, reducing the number of the analysis model is effective method of the methods of the reducing analysis time. By using the "Design Of Experiments(DOE)", efficient analysis was able to be done. To see the effects of the design factors, the 3D FEM is applied only to the selected models. As the design factors, the teeth selected models, the number of turns and the permanent magnet overhang was selected.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.68-74
• /
• 2007

For carnation productivity improvement, compact-low cost discharge lamp type ozonizer using pulse power source is designed and manufactured. This paper describes the discharge characteristics and the ozone generation characteristics with variation of the output voltage of pulse power source, the quantity of flowing air and the operating number of ozonizer. The important conclusions are as follows. The discharge voltage and current values are proportional to the output voltage of pulse power source. The ozone concentration and generation are proportional to the output voltage of pulse power source and the number of ozonizer. The maximum value of the ozone concentration and generation of the discharge lamp type ozonizer can be obtained 890[ppm] and 59.7[mg/h] respectively. In the carnation productivity house, when the discharge lamp type ozonizer is used the carnation is good quality in the uniformity of the carnation stalk thickness and increased the productivity through improvement of the air and the soil.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.54-61
• /
• 2015

A series of CFD calculation has been conducted to investigate the effect of facility confinement on explosion power for process plant facility. The level of confinement of a facility was simplified with VBR(volume blockage ratio) and averaged size of obstacles. FLACS which is 3D CFD code of gas dispersion and the explosion was used for simulating the explosion phenomena in the idealized domain with different confinement level. The CFD results showed a tendency that the overpressure increases with increasing VBR and number of obstacles. The effect of VBR on the overpressure was relatively small for the case of number of obstacle less than 25. The results of this study can be used to provide a safety guideline considering the facility confinement in case of leakage accident of flammable gas and vapor in process plants.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.44-51
• /
• 2004

Fractal-space multiplexing using a moving window(MW) can multiplex holograms by moving a window left and right. and up and down. But, crosstalk occurs by two neighboring moving windows in the vertical direction of the holographic memory system and limits high-density information recording. Accordingly, we analyzed the crosstalk with the focal length of lens, the distance of MW, and the number of multiplexed hologram to record high-density infromation and presented the optical experimental results of fractal-space multiplexing using volumetric photorefractive crystal and disc type photopolymer.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.112-117
• /
• 2004

In this paper, in order to obtain the detailed information about lightning electromagnetic pulses, the electromagnetic pulses radiated from intracloud discharges were measured, and their characteristics and waveform parameters were analyzed statistically. The electromagnetic pulses produced by intracloud discharges are distinctly different with those by lightning return strokes. The zero-crossing times and the full pulse widths of the large bipolar electromagnetic pulses are gradually decreased as the stroke proceeds. Also, the electromagnetic pulses tend to be bipolar, with narrow and fast leader pulses superimposed on the initial half cycle. The mean numbers of leader pulses superimposed on the initial half cycle were 1.61$\pm$0.74 and 1.75$\pm$0.73 for the positive and negative polarities, respectively.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2007

This study proposes to increase the energy-saving effects by reducing excessive intensity of radiation of artificial lighting through analyzing daylight incident. A photosensor sends amounts of detected luminous flux to digital control unit(DCU) as a signal and then, it can decide dimming ratios, received a proper dimming signal from DCU. Generally it is effective to control artificial lighting with the different control ratio of each zone by setting a photosensor as same number and rows as artificial lighting. However, it is ineffective to do in initial costs of systems aspect in offices. As a result of grasping the distribution of daylight previously and analyzing daylight and dimming data, we can dim different dimming ratios to each zone of artificial lighting by a single photosensor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.177-184
• /
• 2010

This paper presents the electric field analysis for 2[MVA] mold transformer using finite element method. The electric field was calculated for the voltage applied to the mold transformer without voids in the insulating material. Then, it was analysed the maximum electric field when the voids was in the insulating materials. And the starting voltage of partial discharge was predicted due to the voids. The effects of voids in epoxy resin on the electric field were investigated for different sizes, shapes, positions and arrangements of voids.