• Journal of radiological science and technology
• /
• v.27 no.4
• /
• pp.61-66
• /
• 2004

In order to improve an efficiency of education and acquisition of PACS administor in Radiological technologist, we implement an e-Learing databank system providing more efficiently provide medical questions set for the integrated education and PACS administor without the limitation of time and space based on XML that is the standard of exchange and transmission of Web documents via Internet. The proposed system is composed of administration module and user module. The former supports some functions: a creation, classification, and management of Radiological question set. Our system can elevate ability of learning and interchange of information among Radiological technologist making preparation of PACS administor for Radiological technologist examination. Finally, our system can maximize an effectiveness of education by evaluating and training users individually with various level according to the user's ability of learning and realization.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.31-36
• /
• 2014

This paper shows the feasibility of using carbon-fiber-reinforced polymer (CFRP) composite materials for manufacturing automotive coil springs. For achieving weight reduction by replacing steel with composite materials, it is essential to optimize the material parameters and design variables of the coil spring. First, the shear modulus of a CFRP beam model, which has $45^{\circ}$ ply angles for maximum torsional stiffness, was calculated and compared with the test results. The diameter of the composite spring was predicted to be 17.5 mm for ensuring a spring rate equal to that when using steel material. Finally, a finite element model of the composite coil spring with $45^{\circ}$ ply angles and 17.5 mm wire diameter was constructed and analyzed for obtaining the static spring rate, which was then compared with experimental results.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.426-432
• /
• 1999

A plus-point eddy current test(ECT) probe was developed to examine the defects on the welds of pumps, valves, and pipings which are the major components of the electric power plants, non-destructive evaluation (NDE) techniques for detecting and sizing the flaws were studied adapting this probe. Differential plus-point ECT probe is consists of two "I"-type coils crossed each other and has an advantage having a small influence on the sensitivity by lift-off variation to the conventional types of probe. The specimens with crack-like electro discharge machining(EDM) notches on the weld of type 304 stainless-steel were fabricated in order to evaluate the plus-point ECT probe response to the flaws. NDE techniques to detect and size the flaws and estimate the flaw type were established with this specimens.

• 대한공업교육학회지
• /
• v.37 no.2
• /
• pp.161-179
• /
• 2012

The purpose of this study was to develop 'energy education' program for Creative Activities in middle school. The subject of this study was carried out with secondary student of middle school in Daegu. The development of 'energy education' program for middle school creative activies was carried out preparation, development and application. The details of each phase are as follows; The preparation phase was consised of collecting and research datas, energy education programs andliterature review for development of program. The development phase was developed through program that based on setting goals, designing of teaching-learning plans, development of materials of teaching and evaluation. The improvement phase was to modufy energy education instructional materials by running CD validity test of the expert, (2) preliminary tests and field trials of students. More than 65% of students to take class of this program agreed with the program of 'energy education' in class of creative activities was appropriate.

• 대한공업교육학회지
• /
• v.39 no.1
• /
• pp.66-84
• /
• 2014

The purpose of this study is to develop STEAM hand-on activity task for middle school manufacturing & automation unit. This study was conducted following three stages. First of all, I carried out documents research and requirements analysis. And the goals for STEAM hand-on activity were set at this stage. Second, topics for STEAM hand-on activity were selected, and the organized for designing hand-on activity related STEAM in the development step. Finally, pilot and field test were conducted in order to amend and/or complement in improvement step. The theme and/or title of the hand-on activities were 'Making the print using wood', 'Making the close up photography & telephoto lens for smart phone'. The STEAM hand-on activities were designed for ten hours for each subject respectively. Each hand-on activity consists of problem situation, objectives statement, materials and tools, an evaluating criteria, related knowledge, portfolio and so on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.411-417
• /
• 2013

The moment responses of electric pole foundations for a railroad were investigated using real-scale load tests. Large overturning moments were applied to two square rigid piles with a 1.1 m width and a 2.2 m embedded depth. Two different installation methods-with and without a form-were applied to evaluate the influence of the form work on the moment capacities of the foundations. The reduction of ground strength caused by the excavation without a form is more pronounce than the decrease of frictional strength due to the smooth concrete surface with a form. From the test results, it is found that the current design method which applies a proportional coefficient to consider the effect of a form work is not appropriate. When the normal and frictional stressed is considered separately, the effect of a form work can be estimated reasonably by reducing the friction angle between soil and foundation by 20%.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.153-160
• /
• 2009

Falling Weight Deflectometer (FWD) tests were performed to evaluate the structural capacity of glass fiber reinforced (GFR), polymer modified (PM), and unmodified asphalt pavement in Korea-LTPP (Long Term Pavement Performance) section. FWD tests showed that the tensile strains of GFR and PM asphalt pavements at the bottom of asphalt layer were 29% and 21% less than that of unmodified asphalt pavement. The structural capacity was then used as a performance criterion for calculating the cost effect of GFR and PM asphalt pavements. From the results, 5cm of asphalt layer thickness was reduced by applying GFR asphalt, and 3cm by applying PM asphalt. However, construction cost of PM and GFR asphalt pavement were increased due to the higher GFR and PM asphalt price. Life cycle cost analysis showed that the initial construction cost of GFR and PM asphalt pavement were higher but the management and user cost were less than those of unmodified asphalt pavement.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.339-344
• /
• 2007

Safety of large scale cable in bridge is very important because it may cause the unwanted catastrophic failure. Although the proof load were considered at the design stage, its soundness must be monitored continuously because the cable may be broken out without warning by the variable external load. The cable tension of in-use structures has been mainly measured by the resonance method and its use has been limited because of relatively large measurement uncertainty. Recently a new magnetic method was developed and its reliability is known to be good for evaluating the cable tension. In this study a system which can deliver the calibrated load to the cable was developed and the measurement reliability of developed magnetic sensor according to the change of external load was analyzed quantitatively. The effect of magnetization frequency, bias magnetic field, and temperature on the sensor output was also evaluated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.95-103
• /
• 2012

In order to improve the dimensional stability and mechanical performance of cement-based composites, the effect of an expansive admixture based on calcium sulphoaluminate (CSA) on the shrinkage and mechanical properties of strain-hardening cement-based composite (SHCC), which exhibits multiple cracks and pseudo strain-hardening behavior in the direct tension, is investigated. Polyethylene fibers reinforced SHCC mixtures with three levels (30, 70, and 100MPa) of compressive strength were compared through free shrinkage, compressive strength, flexural strength, and direct tensile strength measurements. The SHCC mixtures were cast with and without replacing 10% of Portland cement content with CSA admixture. According to test results, CSA admixture is effective in reducing shrinkage of SHCC material. SHCC mixture with CSA admixture exhibited a little higher strength than companion mixture without CSA admixture.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.1
• /
• pp.11-23
• /
• 2015

In this study, the new segment assembling method using cable tensible force was developed to improve the problem of bolt assembling method of shield tunnel. In the field test construction, cable assembling method reduced the assembling time of segment in comparison with bolt assembling method because of guide role of segment shear-key. In the result of measuring the necessary time for segment assembling process, it took 420sec to assemble one segment in bolt method and 400sec to assemble one segment in cable method, but in case of using the cable automatic feeder, it could reduce the necessary time as 60sec in comparison with bolt assembling method. The cable automatic system modeling using BIM, that connected shield TBM also will be utilized in the area of design TBM, excavation plan, method process understanding, construction management and so on.