• Journal of the Korean GEO-environmental Society
• /
• v.8 no.3
• /
• pp.19-25
• /
• 2007

Stone columns is the ground improvement method which composed of compacted gravel or crushed stone inserted into the soft ground consisting of loose sand and clay. There are many difficulties in quantitative analysis of soil-pile interaction because settlement behavior of stone columns is affected by various parameters. In this study, various parameters of behavior of end-bearing group piles are investigated by load tests. Finally, the improved characteristics of soft ground and the influence of design parameters are investigated in this study using PR (performance ratio) value. From the PR value calculation and test results, we know that settlement behavior of stone columns is affected by area replacement ratio of composite ground, diameter of column rather than embedment ratio and mat.

• Composites Research
• /
• v.17 no.1
• /
• pp.18-28
• /
• 2004

In order to evaluate the strength of carbody structures of railway rolling stock made of laminated fiber-reinforced composite materials, total laminate approach was introduced. Structural analyses were conducted to check the basic design of hybrid composite carbody structures of the Korean Tilting Train eXpress(TTX) with the service speed of 180km/h. The mechanical tests were also conducted to obtain strengths of composite laminates. The results show that all stress components of composite carbody structures are inside of failure envelopes and total laminate approach is recommended to predict the failure of hybrid composite carbody structures at the stage of the basic design.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.3
• /
• pp.277-292
• /
• 2012

This paper presents the fundamental study on drag force of shield TBM cutter bit by scaled model test. Several theoretical analyses of the drag force of cutter bit have been studied. However, there are still some difference between the theoretical approaches and actual drag bit capacity. In order to study the drag forces of shield TBM cutter bit, the scaled model tests are carried out and analyzed. The results obtained from scaled model tests are compared with the existing theoretical equations. It is highly expected that the results of this study will be very essentially useful to design and develope the TBM cutterhead.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.75-81
• /
• 2012

In this paper, we design and implementation of effective integrated broadcast contents transmission System based on single server system. Because of previous broadcast contents transmission system is consist of various individual functional equipment. And it is not easy to use and not effective to manage for broadcast contents transmission. In this paper, we evaluated and analysed of developed system in the test environment. As a result of performance test, It showed that it was well performed without any data error in the performance test, and It showed that it was well managed, controled, scheduled, processed of the integrated broadcast contents transmission environment.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.77-77
• /
• 2010

본 연구에서는 Sn-3.0Ag-0.5Cu (SAC305) 무연솔더의 최적 인쇄성을 위한 PCB 및 마스크설계, 스크린프린팅 공정변수의 최적값을 실험계획법을 통해 평가하였다. 사용된 칩은 가로 0.4mm 세로 0.2mm의 0402 MLCC칩이며, 사용된 시험보드는 OSP 표면처리된 PCB이었다. 인쇄성을 판단하기 위한 공정인자는 금속마스크 두께, 마스크홀 크기, 패드크기 및 모양, 인쇄각도, 인쇄속도, 판분리속도이었다. ANOVA분석을 통해 주인자를 파악하였으며, 인쇄성에 영향을 미치는 주인자는 마스크두께와 인쇄각도임이 확인되었다. 그 후 중심 합성법을 이용하여 인쇄성 최적 조건을 확인하였다. 결과로 나타난 등고선/표면도를 통해, 마스크두께가 작을 때에는 인쇄각도가 작아야 높은 인쇄성을 갖으며, 또한 마스크 두께가 클 경우에는 인쇄각도가 커야 높은 인쇄성을 가짐을 알 수 있었다. 추가실험을 통해서 인쇄성 표면도의 정확도를 확인하였으며, 실험값은 표면도에서 표시된 인쇄성값과 비슷함을 알 수 있었다. 또한, 인쇄성이 낮은 영역과 높은 영역에서 접합강도값을 측정하였으며, 인쇄성이 좋은 영역에서 접합강도도 높음을 알 수 있었다.

• Composites Research
• /
• v.24 no.3
• /
• pp.25-30
• /
• 2011

The studies on the non-destructive testing methods of the composite materials are very important for improving their reliability and safety. AE(Acoustic Emission) can evaluate the defects by detecting the emitting strain energy when elastic waves are generated by the generation and growth of a crack, plastic deformation, fiber breakage, matrix cleavage or delamination. In this paper, the AE signals of the filament wound composite cylinder and sandwich cylinder during the pressure test were measured and analyzed. The signal characteristics of PVDF sensors were measured, and an AE signal analyzer which had the band-pass filter and L-C resonance filter were designed and fabricated. Also, the crack detection capability of the fabricated AE signal analyzer wes evaluated during the pressure tests of the filament wound composite cylinder and the sandwich cylinder.

• Land and Housing Review
• /
• v.3 no.3
• /
• pp.249-261
• /
• 2012

The energy use of building operational stage is about 25% of total energy supply in Korea. The intensification of insulation at the design stage and the efficient instruments were used to reduce energy use of the buildings. These efforts are limited at the energy saving side, the residents voluntarily participation in the energy-conservation is more effective. To achieve this purpose, energy use information program (of the individual users) has been developed to lead the energy users actively participating in the energy-conservation program to share at the web. Also, by investigating the necessity and the will of usage of the program and applying a pilot program, the collectability of valid data and the usability have been evaluated.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.181-190
• /
• 2007

A fire-resistant steel with enhanced load-bearing capacity has been developed to enable structural elements such as columns and beams withstand exposure to severe fire conditions. To precisely evaluate the fire-resistant performance of structural elements that compose fire-resistant steels, mechanical properties such as yield strength and elastic modulus are essential. To obtain the mechanical database of fire-resistant steels at high temperatures, tensile tests at high temperatures were conducted on steels of two kinds of thicknesses. The results showed that the thickness difference could not affect the mechanical properties at a high temperature.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.667-667
• /
• 2012

호안블록을 설치하는 목적은 제방의 비탈면 및 저수로 하안을 강수나 유수에 의한 침식작용으로부터 보호하는데 있다. 근래에 들어서는 친수성, 경관, 생태계 보전 및 재생 등과 같은 기능을 가진 다양한 호안블록의 시공이 이루어지고 있는데 이러한 국내 상황은 호안블록에 관한 수리적 연구와 안정성 검토의 필요성을 증가시키고 있다. 현재 국내에서는 호안의 설계 및 시공시에는 하천공사 표준시방서 등을 이용하고 호안블록 제작에는 콘크리트 표준 시방서 등을 이용하고 있다. 그리고 이런 시방서의 내용들은 호안블록 설치 후 호안의 안정성을 보장하는 듯 하다. 하지만 이는 모두 호안블록의 재료 및 설치 기준에 관한 지침서일 뿐이며, 어느것도 호안블록 설치 이후에 호안의 안정성을 보장하지는 않는다. 따라서 현재 국내 상황을 고려한 호안블록 주변의 수리특성에 관한 연구와 안정성 평가 기법의 개발은 매우 시급한 과제이다. 본 연구에서는 한국건설기술연구원 안동 하천실험센터 실규모 수로에 최근 미국과 일본에서 적용하고 있는 호안블록의 안정성 평가 지침을 참고하여 호안블록 시험구간을 설치한 뒤, 서로 다른 형태의 호안블록 두 종류에 대하여 실험을 수행하였다. 실험에 사용된 호안블록은 실재 현장에서 사용되는 블록과 동일한 제품을 사용하였다. 실험 결과 두 종류의 호안블록에서 모두 기반 토층의 침하 현상이 발견되었으며, 그 중에서 블록 중앙에 구멍이 있는 형태의 호안블록의 경우에는 구멍 내부에서 발생한 강한 세굴 현상이 침하로 이어져 결국에는 호안블록이 설치된 구간 전체가 파손되는 양상을 보였다. 또한 유속이 빠른 구간에서 블록의 파손이 더 심화되는 양상도 확인하였다.

• Journal of Platform Technology
• /
• v.9 no.1
• /
• pp.23-31
• /
• 2021

In recent years, in the domestic industry, personal damage has occurred due to sensor malfunction and the emission of harmful gases. But there is a limit to the reliability verification of sensor data because the evaluation of environmental sensors is focused on durability and risk tests. This platform designed a sensor board that measures 10 major substances and a performance verification system for each sensor. In addition, the data collected by the sensor board was transferred to the server for data reliability evaluation and verification using LoRa communication, and a prototype of the sensor data platform was produced to monitor the transferred data. And the collected data is analyzed and predicted by using machine learning techniques.