• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.177-182
• /
• 1997

하나로(HANARO)에서 Mo-99을 생산하기 위한 LEU(Low Enriched Uranium) 표적 설계를 하였다. 표적길이 및 조사위치에 따른 Mo-99의 생성수율(Ci $^{99}$Mo/gU) 변화를 분석하였으며, 표적 설계를 위하여 표적 두께, 반경크기, 밀도, 연료물질등을 채택하여 이들에 대한 민감도 분석을 수행하였으며, 수행결과 생성수율에 가장 영향을 미치는 설계변수는 표적 두께와 밀도로 나타났다. 표적 연료로 어떤 물질을 선택하던 거의 같은 생성수율을 나타내므로 핵적으로는 같은 성능을 나타냄을 확인하였다. 또한 열수력학 조건과 연간생산량을 만족하는 표적 핵연료 집합체 설계가 가능함을 확인하였다.

• Journal of the KSME
• /
• v.31 no.1
• /
• pp.34-42
• /
• 1991

복잡한 형상의 서지 탱크를 CAEDS의 GEOMOD를 이용하여 내부의 리보까지 포함한 용기를 모델링하였으며, 설계 부피를 검사하고 GEOMOD와 GFEM 사이의 직접 데이터 교환을 통하여 구조 해석에 필요한 유한요소를 만들었다. 유한요소법에 최적화 이론을 적용하여 서지탱크의 두께 변화에 따른 응력의 설계 민감도를 구하였으며, 민감도를 근거로 보강 위치 및 국부적인 용기의 두께를 결정하였다. 유한요소법 프로그램(IFES, GFEM)과 솔리드 모델러(GEOMOD), 그리고 최적화 기법(IFES-Optimization)을 모두 통합하여, 최적 설계를 수행함으로써 반복되는 실험에 의한 시간과 경비를 줄임과 동시에 신뢰성 있는 설계방법 및 방향을 제시하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.743-750
• /
• 2016

In this research, the effects of the strength and stiffness of shear walls on the design strength of coupling beams are studied in the shear wall-coupling beam structural system widely used as the lateral-drift resistant system of high-rise buildings. The results show that the design strength of the coupling beams decreases with decreasing concrete strength and core wall thickness, but the shape remains unchanged. In all six models, the design strength of the coupling beams has the largest value at the 10~15th floors in a 40-story building. In other words, the design strength of the coupling beams has the largest value at 0.25H~0.375H where the inflection point exists. The thicker the walls, the smaller the change in the member forces. The thickness of the coupled shear walls has more influence on the design strength of the coupling beams than the concrete strength.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.245-256
• /
• 1995

Rugate filters of inhomogeneous refractive index were designed using the Fourier transform and the effect of reflectance, stop bandwidth, optical thickness, and Q function on the rugate filter was investigated. An iterative correction process using a merit function was employed to fit an initial design to the target spectrum. Three Q functions derived by Sossi, Bovard, and Fabricius, respectively, were compared in terms of the number of iteration, merit function, and optimum optical thickness. The result shows that after a number of iterations the Q functions by Bovard and Fabricius produce high rejection rugate filters closer to the target spectrum than the Sossi's Q function and the optimal optical thickness is determined by the stop-band width of the rugate filter. ilter.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.81-91
• /
• 2003

본 연구에서는 복층으로 구성된 $WSio_2Al$ 금속절연체의 상세를 보여주고 있는데, 금속과 절연체의 합성물질은 태양 흡수율의 설계와 열적인 현상을 보여주기 위해 종종 사용된다. 금속의 접착기면 위에 얇은 복층 코팅으로 구성되는 디자인은 태양 스펙트럼의 파장권역에서 선택적 흡수를 위함이다. 본 연구는 태양 복사의 열성능 평가를 위해 금속과 절연체 필름의 방사율, 태양흡수율, 코팅순서, 미 반사층(AR)의 두께, 코팅 두께와 코팅 면수, 전체 코팅 두께 등에 대해 시뮬레이션 하였다. 그 결과 네 겹의 코팅설계에서 $Sio_2AR$ 75 nm 두께와 각각의 층에서 $0.5\sim0.7$의 가변 금속부분 구성이 가장 우수한 성능을 갖는 것으로 나타났다. 또한 시뮬레이션으로 금속과 절연체 합성물의 최적의 구성과 각각의 코팅 두께에 대한 예측이 가능했으며, 최대 태양흡수율은 0.94, 방사율은 0.115의 금속과 절연체의 합성물을 구성할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.586-589
• /
• 2004

Ni 내부전극을 적용한 X7R의 온도특성을 가지는 고압용 적층 칩 캐패시터를 설계, 제작하였으며 제작된 캐패시터 신뢰성을 검토하였다. 고압용 캐패시터 설계시 절연파괴전압과 유전체 두께간의 최적의 두께가 있음을 볼 수 있으며 그린시트 두께 24 um의 경우 weibull 계수는 13.38, 단위 절연파괴전압은 70 [V/um]을 얻을 수 있었다. X7R 3216, 100 [nF] 정격전압 250[V] 캐패시터를 설계하여 절연파괴전압은 최고 1.29 [KV]인 고압용 칩 캐패시터를 제작하였다. 적층 칩 캐패시터 절연파괴 모드는 유전체 층간의 절연파괴와 더불어 내부전극과 외부 전극 또는 세라믹 소체와의 절연파괴 모드가 나타남을 볼 수 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.717-733
• /
• 2019

In this study, lining thickness distribution and its behind state (particularly, its void state) were analyzed using the GPR survey data performed on three currently operating NATM tunnels. Results of GPR analysis showed that void areas were mostly detected between concrete lining and primary support, particularly, near the crown of the tunnels. The lining thickness in the left-hand side of the tunnel was different from that of the right-hand side by 8.6~253.5 mm when measured in transverse direction. It was also found that longitudinal cracks were prevailed in the area lining thickness was sharply changed. Longitudinal thickness distribution at the crown was also studied and tested by performing 3 goodness-of-fit tests in order to find the most suitable thickness distribution. Normal distribution (or similar distribution) fit most suitably to the measured data if the measured average thickness was larger than designed one; Gamma and/or Inverse Gauss distribution fit to the measured data reasonably well if the measured average thickness was less than the designed value of thickness. Since actual lining thickness can be a potential index when assessing the state and safety of the unreinforced NATM tunnel lining, measuring of the lining thickness with GPR survey might be needed rather than assuming the thickness is always constant and same with the designed value.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.100-103
• /
• 2003

In this paper, the characteristics of an inverted-F antenna for the 2.4GHz local wireless communication system have been analysed in terms of the variation of design parameters. The antenna can be integrated on printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed. By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 6.4% frequency bandwidth for VSWR under 1.5 and 3dB gain.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1103-1108
• /
• 2003

In this paper, the characteristics of an inverted-F antenna for the 2.4GHz local wireless communication system have been analysed in terms of the variation of design parameters. The antenna can be integrated on printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed. By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 6.4 % frequency bandwidth for VSWR under 1.5 and 3dB gain.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.31-36
• /
• 2004

In this paper, the characteristics of an inverted-F antenna for the 2.4GHz(ISM) Bluetooth system have been analysed in terms of the variation of design parameters. The antenna can be integrated on printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 6.3%(150MHz) frequency bandwidth for VSWR under 1.5, and 3dBi gain.