• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.439-445
• /
• 2008

Various turning tests were carried out according to the rudder angle, turning direction, and the speed etc. with the ship's maneuverability measuring system on the training ship HANBADA. After that they were compared with each other on the turning circle, maneuvering performance index and the distance of new course, and then found out that they were satisfied with the IMO maneuvering standards. And the turning circles of port were smaller than those of starboard with all the rudder angles and maneuvering indexes such as K and T were relatively bigger than other vessels. Also, the distance cf new course was measured to $125{\sim}300m$ in case of the new course on $30^{\circ}{\sim}90^{\circ}$. All of these results will be helpful to escape from collision and to alter course on coastal voyage.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.269-269
• /
• 2019

The ships are turning for the purpose of collision avoidence and change of course. It is possible that ships have capsizing accident when improper loading of cargo and excessive use rudder angle in turning. It is difficult for navigation officers to recognize the danger of heeling during a turn, because the dynamic state of the ship changes in real time. Thus, in this study, ship's heeling angle was predicted during turning using the maneuverability indices estimated from the ship's autopilot. The maneuverability indices estimated through the Kalman filter of Autopilot is real-time predictable. The turning radius was obtained from the estimated Index of turining ability and calculations of the heeling angle were possible in turning. It is intended to be used as a basic data on the prevention of danger heeling angle during turning.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.290-291
• /
• 2023

Outlier(이상치) 분석을 통한 등부표 선회안전반경 정보 제공에 관한 연구는 AIS 또는 RTU가 설치된 등부표에 대한 이탈 위험 인지, 항해안전 사고 예방 등 안전대책을 강화하기 위한 연구이다. 등부표는 조류, 바람 등 외력에 의해 이출거리가 발생하여 일정한 패턴으로 선회반경이 형성되나 외력으로 인하여 정상범위에서 벗어나 유실, 위치이동 등이 발생할 수 있고 이는 선박추돌 등 항해안전 사고로도 이어질 수 있다. 이러한 등부표 사고는 물적 피해비용과 이용자의 안전운항에 대한 심리적 부담감 또는 위험감수 등의 추가적인 행정소요 비용이 발생할 수 있다. Outlier(이상치)란 외력 등으로 인해 최대 이출거리 이내 정상범위에서 벗어나거나 존재할 수 없는 극단적인 위치 값으로써 21년도 등부표 위치 데이터를 일정 단위 방위별로 분석해 본 결과 Outlier(이상치)가 식별되었다. 따라서 등부표의 안전한 위치 상태를 시스템적으로 모니터링 하기 위해 Outlier(이상치) 분석을 통한 등부표 선회안전반경 정보 제공에 관한 연구를 하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.1
• /
• pp.84-92
• /
• 1995

The methods by turning circle test and maneuvering indices have been used to study and evaluate the maneuverability of a ship. However recently many studies utilizing the GPS are made on the measurement of the turning circle and in the fishery and hydrographic survey. In this paper, the author carried out the turning circle test using the differential GPS and dumb card together, and compared the data measured by them and analyzed the accuracies of them to obtain the utility basic ones on the measurement of the turning circle by the DGPS. The main results area s follows : 1) To check the accuracies of the GPS, the circling experiments of 50m radius by the DGPS were made on the ground. The accuracies of turning circle measured by the DGPS were found to be very high as the errors of 1.5m. 2) the turning circle by the DGPS could be measured very accurately, by the seed, rudder angle, starboard and port respectively. 3) The turning circle measured by the dumb card was found to be measured accurately as much as the DGPS, when using large rudder angle, the turning circle was large, the turning circle by the dumb car could not be measured accurately on account of large error of bearing of compass. 4) The tactical diameters by the DGPS in case of the rudder angle 35。~5。, were found to be 2.6。15.0 times the Lpp of S.T HAELIM-3 at her slow speed 2.8~16.6 times her Lpp at her half speed, 3.1~17.4 times her Lpp at her full speed. The tactical diameter by the dumb card was found to be 2.4~9.5 times, 2.6~9.6 times, 3.2~12.2 times her Lpp respectively, in the above case and speed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.40-49
• /
• 2016

This study aims to confirm the characteristics of low swirl combustion at our low swirl model combustor. To do it, it is experimentally conducted by evaluating the flame shape, stability region and emissions according to the swirl angle. The most significant feature of low swirl combustion is a occurrence of lifted flame. Such lifted flames happen to combine exquisitely propagating feature of premixed flame with diverging flow. This feature of lifted flame was confirmed through a velocity flow field and visualized the flame in this model combustor. The visualized flame was classified according to the thermal power and equivalence ratio. The variation study in swirl angles showed that the lean flammable limit could be extended only by swirl angles. Also, as the swirl angle increased, it was confirmed that the NOx and CO emissions were decreased due to the mixing enhancement and shorter resident time.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.32-39
• /
• 1996

사이클론형 석탄가스화기내의 2차원 및 3차원 난류 선회유동장을 수치해석 기법을 이용하여 해석하였다. 2차원 해석을 통하여 선회수의 크기에 따른 유동장의 특성을 고찰하였으며, 3차원 유동장 해석결과와의 비교를 통하여 2차원화의 가정에 적절한 개념을 도출하였다. 입구의 크기 및 위치를 적절히 조절하여 반응기 내부에 적절한 유동장을 형성시킬 수 있음을 발견하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.79-88
• /
• 2006

In the present paper, the swirl flow structure and flame characteristics of turbulent premixed combustion in a model gas turbine combustor are investigated using large eddy simulation(LES). A G-equation flamelet model is employed to simulate the unsteady flame behavior. When inlet swirl number is increased, the distinct flow structures, such as the shapes of corner recirculation and center toroidal recirculation zone, are observed and the flame length is shorted gradually. Also, the phenomena of flashback are identified at strong swirl intensity. In order to get the accurate description of unsteady flame behavior, the predictive ability of the acoustic wave in a combustor is primarily evaluated. It is found that the vortex generated near the edge of step plays an important role in the flame fluctuation. Finally it is examined systematically that the flame and heat release fluctuation are coupled strongly to the vortex shedding generated by swirl flow and acoustic wave propagation from the analysis of flame-vortex interaction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.120-122
• /
• 2014

선박의 조타기 작동 신호를 AIS를 통하여 전달함으로써 상대선박의 변침의도를 신속히 파악하여 충돌위험을 피할 수 있는 선회조기감지시스템을 구현하고 실선실험을 통하여 그 실효성을 검증하였다. 또한, 실선실험을 통해 선박의 타각정보가 AIS를 통해 송 수신이 가능하다는 것을 확인하였으며, ECDIS에 표시된 타각정보는 주변선박의 충돌회피에 크게 기여할 것으로 판단된다. 선회조기감지시스템은 선박의 안전운항을 위한 정보 제공의 필요성, 선박 통항량 증가 및 고속화 등으로 인한 위험성 증대로 VTS관제의 역할이 더욱 중요시 되고 있는 상황에서 선박의 조타각이 표시된 해당 시스템을 활용할 경우 변침상황을 보다 신속히 파악할 수 있으므로 관제가 보다 쉬워질 것으로 예상된다. 또한, 선박의 침몰이나 VDR의 소실로 인한 해양사고 분석의 어려움도 AIS를 통한 조타신호가 저장된 해양안전종합정보시스템(GICOMS)의 분석을 통해 다소 해소될 것으로 판단된다.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.177-184
• /
• 2001

Combustion using oxygen enriched air is an energy saving technology that can increase thermal efficiency by the improvement of burning rate and high temperature flame. But information about it is not so enough yet. Flame figure, temperature distribution and emission concentration were measured with oxygen enriched concentration and swirl number in a turbulent diffusion flame to investigate the combustion characteristics. The results showed that flame figure became different as long as oxygen enriched concentration varied and that concentration of NO increased suddenly around $O_2$ 60%.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.112-117
• /
• 2001

An experiment using high preheated and swirled air in the coaxial diffusion flame burner was carried out in order to decrease NOx emission and improve the thermal efficiency. $N_2$ gas was used for diluent and propane was utilized for fuel. Combustion using high preheated air has two remarkable characteristics ; (1) low NOx emission with increasing dilution level, (2) high thermal efficiency in the furnace. Also, swirled air can mix fuel and oxidizer well in condition of diffusion flme and maintain the stable combustion. The color of flame changes from yellow to blue green according to increasing the dilution level of mixture gas. NO emission decreased with increasing dilution level and the swirl number.