• Journal of agricultural medicine and community health
• /
• v.37 no.4
• /
• pp.223-232
• /
• 2012

Objectives: The objective of this study was to identify the relationship between fish consumption and blood mercury levels in a sample of adult Koreans. Methods: The study subjects were 299 residents of Busan (male: 65, female: 234) and 185 residents of Namhae (male: 69, female: 116), South Korea. Demographic characteristics, current smoking, current drinking, fish consumption per week, past history of amalgam treatment, and residential district were recorded by trained interviewers in June and July, 2009. We considered a portion of fish to be equivalent to 70 gm weight, and calculated amounts of fish consumed per week. Using chi-square tests, t-tests, ANOVA, and multiple linear regression analysis, we estimated the relationships between blood mercury levels and amount of fish consumed per week and other factors. Results: The mean blood mercury level of our subjects was 6.61 ${\mu}g/L$, higher than the criterion defined by the United States Environmental Protection Agency (EPA) (5.8 ${\mu}g/L$). In multiple linear regression analysis, residential district and amount of fish consumed per week were associated with blood mercury levels. However, marital status, current drinking, and gender, and age were not associated with blood mercury levels. Conclusions: In conclusion, we suggest the implementation of systematic and periodic population-based studies to decrease the risks of mercury poisoning among South Koreans who consume fish as a regular part of the diet.

• Journal of agricultural medicine and community health
• /
• v.38 no.1
• /
• pp.14-24
• /
• 2013

Objectives: Pregnant women in rural areas do not have access to sufficient obstetric services in their own communities due to the shortage of obstetricians. Therefore, most of these women must seek obstetrician outside of their communities. The purpose of this study was to investigate the relationship between obstetric complications and accessibility to local obstetric care in Korea. Methods: This study was an ecological study in which the unit of analysis was an administrative district. Using Korea National Health Insurance Corporation data, the total number of deliveries and the delivery proportion within and outside of the community from 2001 to 2008 were calculated for 232 administrative districts nationwide. Three outflow levels were categorized based on each district's out-of-community delivery proportion: high outflow (upper one third), moderate outflow (middle one third), and low outflow (lower one third). In addition, three obstetric complication rates (the rate of complications following abortion, ectopic and molar pregnancy, the abortion rate, and the eclampsia rate) were calculated for the 232 districts. One-way ANOVA and multivariate linear regression were used to evaluate obstetric complications among the three outflow levels. Results: The high outflow districts had higher rates of eclampsia and complications following abortion, ectopic, and molar pregnancy compared to the other districts (ANOVA, p<0.05). However, there was no significant difference in the abortion rate among the three groups. Multiple linear regression analysis showed that high outflow districts were statistically significant in the rate of complications following abortion, ectopic and molar pregnancy and eclampsia rate after adjusting for local tax per capita (p<0.01). Conclusion: These results indicate that poor access to local obstetric care correlate with poor obstetric outcomes (delayed or excessive bleeding, embolism, genital tract or pelvic infection, shock or other complications following abortion and ectopic or molar pregnancy, or eclampsia).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.62-75
• /
• 2007

This paper describes a shaped-beam antenna for increasing the antenna gain of a radiating element. The proposed antenna structure is composed of an exciting element and a multi-layered disk array structure(MDAS). The stack micro-strip patch elements were used as the exciter for effectively radiating the electromagnetic power to the MDAS over the broadband, and finite metallic disk array elements - which give the role of a director for shaping the antenna beam with the high gain - were finitely and periodically layered onto it. The efficient power coupling between the exciter and the MDAS should be carried out in such a way that the proposed antenna has a high gain characteristic. The design parameters of the exciter and the MDAS should be optimized together to meet the required specifications to meet the required specifications. In this study, a shaped-beam antenna with high gain was optimally designed under the operating conditions with a linear polarization and the frequency band of $9.6{\sim}10.4\;GHz$. Two methods constructed using thin dielectric film and dielectric foam materials respectively were also proposed in order to implement the MBAS of the antenna. In particular, through the computer simulation process, the electrical performance variations of the antenna with the MDAS realized by the thin dielectric film materials were shown according to the number of disk array elements in the stack layer. Two kinds of antenna breadboard with the MDAS realized with the thin dielectric film and dielectric foam materials were fabricated, but experimentation was conducted only on the antenna breadboard(Type 1) with the MDAS realized with the thin dielectric film materials according to the number of disk array elements in the stack layer in order to compare it with the electrical performance variations obtained during the simulation. The measured antenna gain performance was found to be in good agreement with the simulated one, and showed the periodicity of the antenna gain variations according to the stack layer number of the disk array elements. The electrical performance of the Type 1 antenna was measured at the center frequency of 10 GHz. As the disk away elements became the ten stacks, a maximum antenna gain of 15.65 dBi was obtained, and the measured return loss was not less than 11.4 dB within the operating band. Therefore, a 5 dB gain improvement of the Type 1 antenna can be obtained by the MDAS that is excited by the stack microstrip patch elements. As the disk array elements became the twelve stacks, the antenna gain of the Type 1 was measured to be 1.35 dB more than the antenna gain of the Type 2 by the outer dielectric ring effect, and the 3 dB beam widths measured from the two antenna breadboards were about $28^{\circ}$ and $36^{\circ}$ respectively.

• Journal of Nutrition and Health
• /
• v.50 no.1
• /
• pp.98-110
• /
• 2017

Purpose: The purpose of this study was to evaluate the dietary potassium intake, Na/K intake molar ratio, consumption of 18 food groups, and foods contributing to potassium intake of Korean adults as well as the relationships among quartile of potassium intake level and blood pressure, blood biochemical index. Methods: This study was conducted using the Korea National Health and Nutrition Examination Survey, 2007~2010. The total number of subjects was 20,291. All analyses were conducted using a survey weighting to account for the complex survey design. Results: Overall average intakes of potassium were 2,934.7, 3,070.6, 3,078.1, and 3,232.0 mg/day, and they significantly increased by year in Korean adults. The average dietary potassium intake was close to adequate intake (AI), whereas that of women was considerably lower than the AI. The Na/K intake molar ratio in males (2.89~3.23) was higher than in females (2.62~2.95). The major food groups contributing to potassium intake were vegetables, cereals, and fruits/meats. The two major foods contributing to potassium intake were polished rice and cabbage kimchi. The rankings of food source were as follows; polished rice > cabbage kimchi > potato > oriental melon > sweet potato > seaweed > radish > apple > black soybean. In 50~64 year old females, systolic blood pressure (SBP) significantly decreased (p < 0.01) and HDL-cholesterol significantly increased (p < 0.05) as potassium intake increased. Triglyceride (TG) was significantly higher in the other quartile of potassium intake level than in the first quartile (p < 0.05). Conclusion: In conclusion, our study suggests the need for an appropriate set of dietary reference intakes according to caloric intake by sex and age groups and for development of eating patterns to increase potassium intake and decrease sodium intake.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.266-275
• /
• 2012

In this study, a method is devised to implement a supercritical $CO_2$ ($scCO_2$) injection environment on a laboratory scale and to investigate the effects of $scCO_2$ on the properties of rock specimens. Specimens of shale and sandstone normally constituting the cap rock and reservoir rock, respectively, were kept in a laboratory reactor chamber with $scCO_2$ for two weeks. From this stage, a chemical reaction between rock surface and the $scCO_2$ was induced. The effect of saline water was also investigated by comparing three conditions ($scCO_2$-rock, $scCO_2-H_2O$-rock and $scCO_2$-brine(1M)-rock). Finally, we checked the changes in the properties before and after the reaction by destructive and nondestructive testing procedures. The swelling of shale was a main concern in this case. The experimental results suggested that $scCO_2$ has a greater effect on the swelling of the shale than pure water and brine. It was also observed that the largest swelling displacement of shale occurred after a reaction with the $H_2O-scCO_2$ solution. The results of a series of the destructive and nondestructive tests indicate that although each of the property changes of the rock differed depending on the reaction conditions, the $H_2O-scCO_2$ solution had the greatest effect. In this study, shale was highly sensitive to the reaction conditions. These results provide fundamental information pertaining to the stability of $CO_2$ storage sites due to physical and chemical reactions between the rocks in these sites and $scCO_2$.

• Journal of Wetlands Research
• /
• v.21 no.2
• /
• pp.102-113
• /
• 2019

Slack-tide sampling was carried out at 6 stations at high and low tide for a tidal cycle during spring tide of the early summer (June) and summer (July, August) of 2016 to determine the difference of water quality according to tide in Masan Bay, Korea. The mixing regime of all the water quality components investigated was well explained through the correlation with SAL. In the early summer and summer, TURB, DSi and NNN which mainly flow into the bay from the streams and SS, COD, AMN and $H_2S$ which mainly indicate the internal sink and source materials have a property of conservative mixing and non-conservative mixing, respectively. The conservative mixing showed a good linear relationship of the water quality between high and low tide, and the non-conservative mixing showed a variation of different pattern each other. Factor analysis performed on the concentration difference data sets between high and low tide helped in identifying the principal latent variables for them. In early summer, multiple effects (tidal action, natural influx and internal sinks and sources etc.) acted in combination for the differences to be distributed evenly in four factors (VF1~4), since there were few allochthonous inputs as a low-water season. On the contrary, in summer, the parameters showing large concentration difference at ST-1 affected by stream water were concentrated in one factor (VF1) and clearly distinguished from the parameters affected by the internal sinks and sources. In fact, there is no estuary (bay) that always maintains steady state flow conditions. The mixing regime of an estuary might be changed at any time due to the change of flushing time, and furthermore the change of end-member conditions due to the internal sinks and sources makes the occurrence of concentration difference inevitable. Therefore, when investigating the water quality of the estuary, it is necessary to take a sampling method considering the tide to obtain average water quality data.

• Journal of Nutrition and Health
• /
• v.52 no.2
• /
• pp.206-216
• /
• 2019

Purpose: Management of the metabolic risk factors in diabetes patients is essential for preventing or delaying diabetic complications. This study compared the levels of the metabolic risk factors in diabetes patients according to the income levels, and examined the secular trends in recent decades. Methods: The data from the Korea National Health and Nutrition Examination Survey 1998 ~ 2014 were used. The diabetes patients were divided into three groups based on their household income levels. General information was obtained through self-administered questionnaires, and the blood biomarkers and blood pressure data were obtained from a health examination. Multivariable linear regression models were used to compare the metabolic biomarker levels according to the household income levels, adjusting for potential confounding factors. Results: The fasting blood glucose, hemoglobin A1c, and blood lipid (total cholesterol, high-density lipoprotein (HDL) cholesterol, low-density lipoprotein (LDL) cholesterol, and triglyceride) levels were similar in the three groups. During the survey period of 16 years, the blood pressure showed a significant decreasing trend with time in all groups (p < 0.001). In contrast, the fasting blood glucose (p = 0.004), total cholesterol (p < 0.001), and LDL-cholesterol levels (p = 0.007) decreased significantly, and the HDL-cholesterol level (p < 0.001) increased significantly in the highest-income groups. In the lowest-income group, the fasting blood glucose (p = 0.02), total cholesterol (p < 0.001), and triglyceride (p = 0.003) levels showed a significant decreasing trend over time. On the other hand, the middle-income group showed no significant change in any of the metabolic risk factors except for blood pressure. Conclusion: The level of management of metabolic risk factors according to the income level of Korean diabetes patients was similar. On the other hand, the highest- and lowest-income groups showed positive trends of management of these factors during 16 years of observation, whereas the middle-income group did not show any improvement.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.261-269
• /
• 2018

The cowpea aphid Aphis craccivora Koch (Hemiptera: Aphididae) is a polyphagous species with a worldwide distribution. We investigated the temperature effects on development periods of nymphs, and the longevity and fecundity of apterous female of A. craccivora. The study was conducted at six constant temperatures of 10.0, 15.0, 20.0, 25, 30.0, and $32.5^{\circ}C$. A. craccivora developed successfully from nymph to adult stage at all temperatures subjected. The developmental rate of A. craccivora increased as temperature increased. The lower developmental threshold (LT) and thermal constant (K) of A. craccivora nymph stage were estimated by linear regression as $5.3^{\circ}C$ and 128.4 degree-days (DD), respectively. Lower and higher threshold temperatures (TL, TH and TH-TL, respectively) were calculated by the Sharpe_Schoolfield_Ikemoto (SSI) model as $17.0^{\circ}C$, $34.6^{\circ}C$ and $17.5^{\circ}C$. Developmental completion of nymph stages was described using a three-parameter Weibull function. Life table parameters were estimated. The intrinsic rate of increase was highest at $25^{\circ}C$, while the net reproductive rate was highest at $20^{\circ}C$. Biological characteristics of A. craccivora populations from different geographic areas were discussed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.1
• /
• pp.29-41
• /
• 2019

Terrestrial Gross Primary Production (GPP) is the largest global carbon flux, and forest ecosystems are important because of the ability to store much more significant amounts of carbon than other terrestrial ecosystems. There have been several attempts to estimate GPP using mechanism-based models. However, mechanism-based models including biological, chemical, and physical processes are limited due to a lack of flexibility in predicting non-stationary ecological processes, which are caused by a local and global change. Instead mechanism-free methods are strongly recommended to estimate nonlinear dynamics that occur in nature like GPP. Therefore, we used the mechanism-free machine learning techniques to estimate the daily GPP. In this study, support vector machine (SVM), random forest (RF) and artificial neural network (ANN) were used and compared with the traditional multiple linear regression model (LM). MODIS products and meteorological parameters from eddy covariance data were employed to train the machine learning and LM models from 2006 to 2013. GPP prediction models were compared with daily GPP from eddy covariance measurement in a deciduous forest in South Korea in 2014 and 2015. Statistical analysis including correlation coefficient (R), root mean square error (RMSE) and mean squared error (MSE) were used to evaluate the performance of models. In general, the models from machine-learning algorithms (R = 0.85 - 0.93, MSE = 1.00 - 2.05, p < 0.001) showed better performance than linear regression model (R = 0.82 - 0.92, MSE = 1.24 - 2.45, p < 0.001). These results provide insight into high predictability and the possibility of expansion through the use of the mechanism-free machine-learning models and remote sensing for predicting non-stationary ecological processes such as seasonal GPP.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.151-164
• /
• 2022

According to the records of historical and instrumental earthquakes, the southeastern part of the Korean Peninsula is considered the highest seismic activity area. Owing to recent reports of numerous Quaternary faults along the Yangsan and Ulsan fault zones, paleoseismological studies are being actively conducted in these areas. The study area is located in the central part of the Ulsan fault zone, where the largest number of active faults have been reported. Based on lineament and geomorphic analysis using LiDAR images and aerial photographs, fault-related landforms showing topographic relief were observed and a trench survey was conducted. The trench length 20 m, width 5 m, depth 5 m is located approximately 300 m away to the northeast from the previously reported Malbang fault. From the trench section, we interpreted the geometric and kinematic characteristics of the fault based on the deformed features of the Quaternary sedimentary layers. The attitude of the reverse fault, N26°W/33°NE, is similar to those of the reported faults distributed along the Ulsan fault zone. Although a single apparent displacement of approximately 40 cm has been observed, the true displacement could not be calculated due to the absence of the slickenline on the fault plane. Based on the geochronological results of the cryogenic structure proposed in a previous study, the most recent faulting event has been estimated as being earlier than the late Wurm glaciation. We interpreted the thrust fault system of the study area as an imbrication structure based on the previous studies and the fault geometry obtained in this additional trench. Although several previous investigations including many trench surveys have been conducted, they found limited success in obtaining the information on fault parameters, which could be due to complex characteristics of the reverse fault system. Additional paleoseismic studies will contribute to solving the mentioned problems and the comprehensive fault evolution.