• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.64-72
• /
• 2010

In general, due to the interactions among subsystems, it is difficult to design an decentralized controller for nonlinear interconnected systems. In this study, the model of nonlinear interconnected systems is studied via decentralized fuzzy control method with time delay and polytopic uncertainty. First, the nonlinear interconnected system is represented by an equivalent Takagi-Sugeno type fuzzy model. And the represented model can be rewritten as Parameterized Linear Matrix Inequalities(PLMIs), that is, LMIs whose coefficients are functions of a parameter confined to a compact set. We show that the resulting fuzzy controller guarantees the asymptotic stability and disturbance attenuation of the closed-loop system in spite of controller gain variations within a resulted polytopic region by example and simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.319-325
• /
• 2004

FHMA(frequency hopping multiple access) communication system has good performance for the LPI and AJ(low probability of intercept and anti-jamming) application. However, high PAPR(peak to average power ratio) happens in the base-station or the repeater system because of a large number of users. In general, predistorter is used to complete the HPA(high power amplifier) nonlinear characteristics. This paper analyzes BER performance when magnitude of IBO(input back oft) and the number of user are considered as the system parameters. In case of the SSPA(solid state power amplifier), the predistorter does not always work as a complete nonlinear compensator. We find that there is a minimum value of IBO for the predistorter to compensate for the nonlinear SSP A, which is changed as the number of user. If IBO is lower than 6 ㏈ at the user number of 16 and p=1, the system with predistorter is poorer than the one without predistorter. Only when the IBO is over 6 ㏈, predistorter does work as a nonlinear compensator. We call it as cross-over IBO value. TWTA improves the more compensation performance than SSPA because characteristic AM/AM of TWTA has more nonlinear than SSPA. At the BER=10$\^$-3/, there are SNR power gains of about 2.5 ㏈ and 3 ㏈ due to the predistorter when the numbers of users are 16 and 32, respectively.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1185-1194
• /
• 2015

A spherical panoramic image does not conform to the pin-hole camera model, and, hence, it is not possible to utilize previous techniques consisting of plane-to-plane transformation. In this paper, we propose a new method to estimate the planar geometric transformation between the planar image and a spherical panoramic image. Our proposed method estimates the transformation parameters for latitude, longitude, rotation and scaling factors when the matching pairs between a spherical panoramic image and a planar image are given. A planar image is projected into a spherical panoramic image through two steps of nonlinear coordinate transformations, which makes it difficult to compute the geometric transformation. The advantage of using our method is that we can uncover each of the implicit factors as well as the overall transformation. The experiment results show that our proposed method can achieve estimation errors of around 1% and is not affected by deformation factors, such as the latitude and rotation.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.123-134
• /
• 2004

In this research, a multilevel decomposition technique to enhance the efficiency of the configuration optimization of truss structures was proposed. On the first level, the nonlinear programming problem was formulated considering cross-sectional areas as design variables, weight, or volume as objective function and behavior under multiloading condition as design constraint. Said nonlinear programming problem was transformed into a sequential linear programming problem. which was effective in calculation through the approximation of member forces using behavior space approach. Such approach has proven to be efficient in sensitivity analysis and different form existing shape optimization studies. The modified method of feasible direction (MMFD) was used for the optimization process. On the second level, by treating only shape design variables, the optimum problem was transformed into and unconstrained optimal design problem. A unidirectional search technique was used. As numerical examples, some truss structures were applied to illustrate the applicability. and validity of the formulated algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3000-3005
• /
• 2015

Reliable monitoring and diagnosis of industrial processes is quite important for in terms of quality and safety. The goal of fault diagnosis is to find process variables responsible for causing specific abnormalities of the process. This work presents a classification-based diagnostic scheme based on nonlinear representation of process data. The use of a nonlinear kernel technique is able to reduce the size of the data considered and provides efficient and reliable representation of the measurement data. As a filtering stage a preprocessing is performed to eliminate unwanted parts of the data with enhanced performance. The case study of an industrial batch process has shown that the performance of the scheme outperformed other methods. In addition, the use of a nonlinear representation technique and filtering improved the diagnosis performance in the case study.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.987-988
• /
• 2011

산업발전과 전력용 반도체 소자의 비약적인 발달로 부하설비가 첨단화, 자동화 되면서 전력변환장치 등 비선형 부하 사용이 증가하고 있으며, 이에 따라 전력계통에는 고조파와 불평형이 필연적으로 발생하게 된다. 이러한 고조파와 불평형은 전력품질을 악화시킴으로써 설비의 효율 감소는 물론 전기적 사고와 불필요한 전력손실을 야기시키고 있다. 본 연구는 하이브리드변압기 동작원리 및 에너지절감 이론을 연구하고 실제 현장적용을 통한 에너지 절감효과 및 전력품질에 미치는 영향을 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1147-1154
• /
• 2005

In this paper, we propose some PAPR(Peak to Average Power Ratio) reduction methods using WHT(Walsh Hadamard Transform) to reduce high PAPR generated in OFDM system because of multi carrier modulation. These proposed methods are the methods which has additional PAPR reduction performance without a loss of bandwidth efficiency and a large increment of calculation complexity than common PAPR reduction methods by combining the WHT with some common methods. In this paper, we propose two PAPR reduction methods made by combining a SLM(Selective Mapping) and DSI(Dummy Sequence Insertion) with a WHT. From simulation result, we can find that the PAPR reduction methods using a WHT can get about 1 dB additional PAPR reduction performance than common PAPR reduction methods; they are SLM and DSI. And, because our proposed methods have not only PAPR reduction effect, but also frequency diversity effect, more stabile data transmission is possible in nonlinear HPA and multipath fading channel.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.403-414
• /
• 1994

Nonlinear analysis of RC containment structure under thermal load and pressure is presented to trace the behaviour after an assumed LOCA. The temperature distribution varying with time through the wall thickness is determined by transient finite element analysis with the two time level scheme in time domain. The layered shell finite elements are used to represent the containment structures in nuclear power plants. Both geometric and material nonlinearities are taken into account in the finite element formulation. The constitutive relation of concrete is modeled according to Drucker-Prager yield criteria in compression. Tension stiffening model is used to represent the tensile behaviour of concrete including bond effect. The reinforcing bars are modeled by smeared layer at the location of reinforcements accounting elasto-plastic axial behaviors. The steel liner model under Von Mises yield criteria is adopted to represent elastic-perfect plastic behaviour. Geometric nonlinearity is formulated to consider the large displacement effect. Thermal stress components are determined by the initial strain concept during each time step. The temperature differential between any two consecutive time steps is considered as a load incremental. The numerical results from this study reveal that nonlinear temperature gradient based on transient thermal analysis will produces excessive large displacement. Nonlinear behavior of containment structures up to ultimate stage can be traced reallistically. The present study allows more realistic analysis of concrete containment structures in nuclear power plants.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.1 s.53
• /
• pp.67-77
• /
• 2007

Site coefficients in IBC and KBC codes have some limits to predict the rational seismic responses of a structure, because they take into account only the effect of the soil amplification without the effects of the structure-soil interaction. In this study, upper and lower limits of the site coefficients are estimated through the pseudo 3-D elastic seismic response analyses of structures built on the linear or nonlinear soil layers taking Into account the effects of the structure-soil interaction. Soil characteristics of site classes of A, B and C were assumed to be linear, and those of site classes of D and E were done to be nonlinear and the Ramberg-Osgood model was used to evaluate shear modulus and damping ratio of a soil layer depending on the shear wave velocity of the soil layer, Seismic analyses were performed with 12 weak or moderate earthquake records scaled the peak acceleration to 0.1g or 0.2g and deconvoluted as earthquake records at the bedrock located at 30m deep under the outcrop. With the study results of the elastic seismic response analyses of structures, new standard response spectrum and upper and lower limits of the site coefficients of $F_{a}\;and\;F_{v}$ at the short period range and the period of 1 second are suggested including the effects of the structure-soil interaction, and new site coefficients for the KBC code are also suggested.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.377-380
• /
• 2006

본 논문에서는 통신해양기상위성의 지상국에 구축된 고 출력증폭기에 대한 특성 모델링 및 이에 따른 입력신호에 따른 출력 신호의 상호 간섭에 대한 결과가 정리되어 있다. 고 출력증폭기는 지상국에서 위성으로 신호를 전송할 때 필요한 장비로써 비선형 특성으로 인해 입력된 신호에 대한 다양한 하모닉 성분이 발생된다. 특히 통신해양 기상위성의 지상국의 경우에는 하나의 고 출력증폭기에 대해 두개의 서로 다른 주파수의 신호를 입력해야 하는 것을 고려해야 하기 때문에 이에 대한 영향은 사전에 반드시 분석되어야 한다. 본 논문에서는 고출력증폭기의 P1dB 특성곡선에 의해 특성 모델링을 수행한 결과 및 이러한 모델을 검증하기 위해 이미 정의된 두 신호에 대한 간섭의 양을 확인하였다. 특히 고 출력 증폭기의 전단에 속하는 상향 주파수 변환기의 특성을 고려한 신호를 사용하여 실제의 통신해양기상위성으로 데이터를 전송할 때의 결과를 얻는데 중점을 두었다. 그 결과 상호간의 간섭에 의해 발생되는 신호는 실제 보내고자 하는 신호의 대역과 매우 가깝게 있으며 그 크기는 보내고자 하는 신호의 특성에 따라 달라지는 것을 확인 할 수 있었다.