• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.618-633
• /
• 2000

In this paper, a Gaussian interpolation filter and cubic interpolation filter are presented to do more accurate channel estimation compared to the conventional linear interpolation filter for COFDM systems. In addition to an interpolation filter, a low pass filter using FFT and IFFT is also presented to reduce the noisy components of a channel estimate obtained by an interpolation filter. Channel estimates after low-pass filtering combined with interpolation filters can lower the error floor compared to the use of only interpolation filters. Computer simulation demonstrates that the presented channel estimation methods exhibit an improved performance compared to the conventional linear interpolation filter for COFDM systems in time-varying multipath fading channel and0.1 ~ 0.2 dB of Eb/No difference at BER=10-4 when the perfect channel estimation is compared.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.504-510
• /
• 2004

The objective of this paper is to propose the image interpolation method with pseudomedian filter for Field warping and morphing, and to evaluate and analyze its subjective image quality. The Field warping relatively gives rise to more computing overhead, but it can use the control line to control the warping result with more elaboration. Due to the working characteristics of the image warping and morphing process, various complex geometrical transformations occur and a image interpolation technique is needed to effectively process them. Of the various interpolation techniques, bilinear interpolation which shows above average performance is the most widely used. However, this technology has its limits in the reconstructivity of diagonal edges. The proposed interpolation method is to efficiently combine the bilinear interpolation and the pseudomedian filter-based interpolation which shows good performance in the reconstructivity of diagonal edges. According to the proposed interpolation method, we could get more natural warping and morphing results than other interpolation methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.37-41
• /
• 2021

This paper presents a study to implement a touch screen capable of real-time response processing in a low-end embedded system. This was done by introducing an algorithm using an interpolation method to represent real-time response characteristics when a touch input is performed. In this experiment, we applied a linear interpolation algorithm that estimates random data by deriving a first-order polynomial from 2-point data. We also applied a Lagrange interpolation algorithm that estimates random data by deriving a quadratic polynomial from 3-point data. As a result of the experiment, it was found that the Lagrange interpolation method was more complicated than the linear interpolation method, and the processing speed was slow, so the text was not smooth. When using the linear interpolation method, it was confirmed that the speed displayed on a screen is 2.4 times faster than when using the Lagrange interpolation method. For real-time response characteristics, it was confirmed that smaller size of the executable file of the algorithm is more advantageous than the superiority of the algorithm itself. In conclusion, in order to secure real-time response characteristics in a low-end embedded system, it was confirmed that a relatively simple linear interpolation algorithm performs touch operations with better real-time response characteristics than the Lagrange interpolation method.

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.334-341
• /
• 1998

In this paper, we present a new interpolation scheme for image enhancement using nonlinear operator. In general, interpolation techniques are based on linear operators which are essentially lowpass filters, hence, they tend to blur fine details in the original image. In our approach, the operator itself balances the strength of its sharpening and noise suppressing components according to the properties of the input image data.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.531-536
• /
• 2007

In this paper we present an interpolation-LQ control technique which tunes continuously the controller gain by interpolating the gains of sub-LQ controllers. The proposed controller design technique is applied to the container crane system for simulations. Several cases of simulations are carried out in order to prove the control effectiveness and robustness. The simulation results of the proposed controller are compared with those of LQ controllers. The results showed better control performance than those of LQ controllers.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.165-170
• /
• 2019

Recently, modern society has come up with the importance of video processing as various imaging systems have developed. However, deterioration occurs in the process of transmitting, processing, and storing video data for various reasons. Deterioration will damage the original image, and the typical noise is Salt and Pepper noise. There are A-TMF, CWMF, and linear interpolation as the means to eliminate Salt and Pepper noise. However, these methods show somewhat poor noise abatement performance in high-density noise areas. Therefore, this paper proposes an algorithm to eliminate noise using modified linear interpolation. To prove the validity of the proposed algorithm, PSNR, Profile was used to compare it with existing methods.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.165-173
• /
• 1997

The combined bundle block adjustment with projection center coordinates determined by kinematic DGPS-positioning has reached a high level of accuracy. Standard deviations of the ground coordinates of $\pm{10cm}$ or even better can be reached. On this accuracy level also smaller error components are becoming more important. One major point of this is the interpolation of the projection centers as a function of time between the GPS-antenna locations. A just linear interpolation is not respecting the not linear movement of the aircraft. Based on a least squares polynomial fitting the aircraft maneuver can be estimated more accurate and blunders of the GPS-positions caused by loss of satellite and cycle slips are determinable. The interpolation with a time interval of 3sec in the study area RHEINKAMP is quite different to the interpolation with a time interval of 6-7sec in the study area MAAS. The GPS-positions of the study area are identified as blunders based on a local polynomial regression. This cannot be neglected for precise block adjustment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1455-1461
• /
• 2018

This paper presents a kernel analysis of weighted linear interpolation based on even-odd decomposition (EOD). The EOD method has advantages in that it provides low-complexity and improved image quality than the CCI method. However, since the kernel of EOD has not studied before and its analysis has not been addressed yet, this paper proposes the kernel function and its analysis. The kernel function is divided into odd and even terms. And then, the kernel is accomplished by summing the two terms. The proposed kernel is adjustable by a parameter. The parameter influences efficiency in the EOD based WLI process. Also, the kernel shapes are proposed by adjusting the parameter. In addition, the discussion with respect to the parameter is given to understand the parameter. A preliminary experiment on the kernel shape is presented to understand the adjustable parameter and corresponding kernel.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.85-99
• /
• 2020

Reservoir is an important infrastructure of our society because it can store immense amount of water for various usages - manufacturing, agriculture, drinking, power generation, tourism etc. For maintenance of reservoir, various efforts in administrative and technological aspects are periodically conducted and monitoring the conditions of reservoir bed is the first priority for maintenance of reservoir. To check the conditions of reservoir bed, we measured depth of reservoir by using echo sounder, which is relatively reliable, prior to discharging of stored water and surveyed topography of reservoir by using UAV after discharging of water. Then, we conducted interpolation of measured depth of water by means of inverse distance weighting interpolation, Kriging interpolation, minimum curvature interpolation and radial basis function interpolation and calculated the volume of reservoir for each interpolation method. We compared the calculated volume of reservoir with the volume of water calculated by UAV after discharging of water and found the following results: First, as results of the above processes, we found that the Kriging interpolation was 97% correct in measurement of the volume of reservoir. Second, as results of comparison of differences between topographical areas and interpolated areas after selection of cross section for comparison, Kriging interpolation was found to have the most similar configuration with the topographical configuration by showing the least difference in the area of cross section. Therefore, it is determined that the optimal modeling of reservoir bed with the water depth data measured by echo sounder shall provide basic information for efficient maintenance of reservoir.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.159-163
• /
• 1995

음성 코딩에 있어서 스펙트럼 정보의 효율적인 방법으로써 다중 형태 프레임 분할 방법을 제안하였다. 일반적인 보코더의 경우 엔코더에서 전송된 스펙트럼 정보를 인접 프레임 계수간의 선형보간에 의해 하부프레임 단위의 스펙트럼 계수간의 선형보간에 의해 하부프레임 단위의 스펙트럼 정보를 재생해 낸다. 이 때 비선형적 스펙트럼 변화가 존재하는 경우에는 스펙트럼 왜곡이 발생하며 본 논문에서는 이를 intra frame spectral distortion 이라 정의한다. 제안된 다중 형태 프레임 분할 방법은 한 프레임내에서 스펙트럼 계수의 변화를 잘 나타낼 수 있도록 차수마다 다른 분할 형태를 적용하여 IFSD을 최소화시키는 방법이다. 스펙트럼 정보로써 line spectrum pair 계수를 이용하였으며, 분할 개수 및 분할 형태의 개수에 따른 IFSD을 분석하여 이를 기존의 방법과 비교하였다. 그 결과 기존의 방법보다 적은 정보량으로 왜곡이 적은 스펙트럼을 재생할 수 있었다.