• Korean Journal of Poultry Science
• /
• v.9 no.2
• /
• pp.63-101
• /
• 1982

A study was conducted to investigate the possibility of improving the effectiveness of the existing method(s) to estimate the edible meat weight in live broiler chicken. Four. breeds of chicken, white Cornish broiler chicks(parent stock), Single Comb White Leghorn(SCWL) egg strain chicks (parent stock), and two reciprocal cross breds of these parent stocks were employed in this study. A total of 480 birds, 60 male and 60 female chicks for each breed, were used. Ten male and 10 female chicks from each breed were randomly sacrificed at 0, 2, 4, 6, 8 and 10 weeks of ages in order to measure the body weight, edible meat weight of breast and 1eg(thigh and drum-stick), various components of body weight and various body shape measurements. In addition, chemical analyses of edible meat were carried out. Results obtained from this sturd were summarized as follows. 1. The average body weights of White Cornish broiler chicks and SCWL egg strain chicks were 1.82${\pm}$0.048kg(X${\pm}$S.E.) and 0.67${\pm}$0.029 kg. respectively, at 8 weeks of age. The feed to gain ratio for White Cornish and SCWL chicks were 2.24 and 3.28, respectively, for 0 to 8 weeks of age. The reciprocal cross bred chicks (White Cornish ${\times}$ SCWL) showed intermediate values in both parameters.

• 전기의세계
• /
• v.29 no.3
• /
• pp.170-176
• /
• 1980

이 논문은 제어신호가 이상적인 포화특성을 갖은 제작조건하의 시불변, 선형 제어계의 시최적화 제어기구의 설계이론을 비교 연구하는데 목적을 두었다. 어떤 초기상태에 있는 계를 특정된 최종상태로, 최단시간내에 이행시켜 가는데 요구되는 제어기구의 설계문제는 여러해 동안 흥미있는 연구과제로 학계에 등장되었고 이러한 문제를 처리하는데에는 여러가지의 설계방법이 제안되어 왔다. 이 논문에서는 이러한 최적화 제어기구의 설계 이론중, 상태천이법에 의한 방법, 최대원리의 적용에 의한 방법 및 동적 프로그래밍기법에 의한 방법들을 서로 비교하여 2차계의 시최적화 설계사례에 이들을 적용시킴으로써 그 설계법상의 문제점을 비교 검토하여 보려는데 목적을 두었다. 설계사례 2차계는 시불변, 선형인 것으로 가정하였으며, 초기상태벡터 및 최종상태벡터는 모두 특정된 값으로 지정되고 제어신호는 이상적인 포화특성으로 제약받으며 스윗칭 시간이 유한크기가 아닌 정규형인 경우에 한정시켜 다루었다. 어느 설계이론을 적용시키나 시최적화를 위한 제어측은 단속제어방식으로 결과되었으나, 시최적화 문제의 특수성때문에 최대원리 및 동적 프로그래밍기법의 적용사례에서는 자연경계조건 및 Transversality 조건 등이 스윗칭시간 또는 최종시간을 직접 결정하여 주는 관건은 되지 못하였으며 계통의 상태방정식 또는 보조상태방정식을 구속제약된 양단상태량을 만족하도록 최적에어측을 적용하여 풀므로써 스윗칭시간과 최종시간이 얻어진다. 따라서 어느 한가지 방법의 적용만으로는 수학적인 처리상의 애로는 피할길이 없었으며 Hamiltonian함수의 변화성질을 보조적으로 활용하여 가면 이러한 번거로움이 덜하여 지긴하나, 다루는 계통의 차수가 높을 수록 이러한 수치해를 얻기위한 번거로움은 여간한 험로가 아닌 것으로 생각된다. 결론적으로 이러한 시최적화문제의 설계에는 몇가지의 혼용적용이 바람직하다고 결론된다. 이의 개발에 박차를 가하지 않을 수 없는 것이다.고, 우선 여기서는 당면문제로서 대처하지 않으면 안될 자동주파수제어문제및 계통의 경제운용문제만에 한정하여, 이것을 우리나라의 현상과 관련시켜 개설하고, 이들의 자동화에 관한 기본적인 문제를 간단히 적어 보겠다. 가능하다. 제작완료된 ASIC은 기능시험을 완료했으며 실제 line-of-sight(LOS) 시스템 구현에 적용중이다. 시대를 살아 갈 회원들이다. '컨텐츠의 시대'가 개막되는 것이며, 신세기통신과 SK텔레콤은 선의의 경쟁 과 협력을 통해 이동인터넷 서비스의 컨텐츠를 개발해 나가게 될 것이다. 3배가 높았다. 효소 활성에 필수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을 나타내었다. 나타내었다. $\beta$4 integrin의

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.46-52
• /
• 2018

A simple Crocco's $n-{\tau}$ time delay model and linear analysis of fluid flow coupled with acoustics are combined to investigate the high frequency combustion instability in the combustion chamber of LOX/hydrocarbon engines. The partial differential equation of the velocity potential is separated into ordinary differential equations, and eigenvalues that correspond to tangential resonance modes in the cylindrical chamber are determined. A general solution is obtained by solving the differential equation in the axial direction, and boundary conditions at the injector face and nozzle entrance are applied in order to calculate the chamber admittance. Frequency analysis of the transfer function is used to evaluate the stability of system. Stability margin is determined from the system gain and phase angle for the desired frequency range of 1T mode. The chamber model with variable baffle length and configurations are also considered in order to enhance the 1T mode stability of the combustion chamber.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.789-798
• /
• 2008

The stiffness method provides a framework to calculate the structural deformations directly from solving the equilibrium state. However, to use the displacement shape functions leads to approximate estimation of stiffness matrix and resisting forces, and accordingly results in a low accuracy. The conventional flexibility method uses the relation between sectional forces and nodal forces in which the equilibrium is always satisfied over all sections along the element. However, the determination of the element resisting forces is not so straightforward. In this study, a new fiber finite element mixed method has been developed for nonlinear anaysis of steel-concrete composite structures in the context of a standard finite element analysis program. The proposed method applies the Newton method based on the load control and uses the incremental secant stiffness method which is computationally efficient and stable. Also, the method is employed to analyze the steel-concrete composite structures, and the analysis results are compared with those obtained by ABAQUS. The comparison shows that the proposed method consistently well predicts the nonlinear behavior of the composite structures, and gives good efficiency.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.352-358
• /
• 1986

An extensive experimental survey on the retention behaviors of phenols in the binary solvent system such as methanol-water, acetonitrile-water and tetrahydrofuran-water as well as the ternary solvent system such as methanol-acetonitrile-water and methanol-tetrahydrofuran-water is presented. A linear equation, which describes the capacity factor as a function of the solvent composition in the mobile phase and is able to predict the retention behaviors of phenols, was obtained. The iso-eluotropic lines for the binary and ternary solvent system are based on the equal strength of the methanol-water solvent which shows an optimum separation of the phenols used. The specific effect of each solute in the binary solvent system appeared to be larger than those in the ternary system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.4
• /
• pp.204-210
• /
• 1998

This paper presents the development of the probability density function applicable for wave heights (peak-to-trough excursions) in finite water depth including shallow water depth. The probability distribution applicable to wave heights of a non-Gaussian random process is derived based on the concept of the maximum entropy method. When wave heights are limited by breaking wave heights (or water depth) and only first and second moments of wave heights are given, the probability density function developed is closed form and expressed in terms of wave parameters such as $H_m$(mean wave height), $H_{rms}$(root-mean-square wave height), $H_b$(breaking wave height). When higher than third moment of wave heights are given, it is necessary to solve the system of nonlinear integral equations numerically using Newton-Raphson method to obtain the parameters of probability density function which is maximizing the entropy function. The probability density function thusly derived agrees very well with the histogram of wave heights in finite water depth obtained during storm. The probability density function of wave heights developed using maximum entropy method appears to be useful in estimating extreme values and statistical properties of wave heights for the design of coastal structures.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.140-145
• /
• 2018

This paper deals with the dynamical analysis of a two-point mooring vessel under surge excitations. The characteristics of nonlinear behaviors are investigated completely including bifurcation and limit cycle according to particular input parameter changes. The strong nonlinearity of the mooring system is mainly caused by linear and cubic terms of restoring force. The numerical simulation is performed based on the fourth order Runge-Kutta algorithm. The bifurcation diagram and several instability phenomena are observed clearly by varying amplitudes as well as frequencies of surge excitations. Stable periodic solutions, called the periodic windows, can be obtained in succession between chaotic clouds of dots in case of frequency ${\omega}=0.4rad/s$. In addition, the chaotic region is unexpectedly increased when external forcing amplitude exceeds 1.0 with the angular frequency of ${\omega}=0.7rad/s$. Compared to the cases for ${\omega}=0.4$, 0.7rad/s, the region of chaotic behavior becomes more fragile than in the case of ${\omega}=1.0rad/s$. Finally, various types of steady states including sub-harmonic motion, limit cycle, and symmetry breaking phenomenon are observed in the two-point mooring system at each parameter value.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.199-204
• /
• 2014

In binary solidification compositional convection in a porous mushy layer influences the quality of the final products. We consider the mushy layer solidifying from below with a constant solidification velocity. The disturbance equations for the mushy layer are derived using linear stability theory. The basic-state temperature fields and the distribution of the porosity in the mushy layer are investigated numerically. When the superheat is large, the thickness of the mushy layer is relatively small compared to the thickness of the thermal boundary layer. With decreasing the superheat the critical Rayleigh number based on the thickness of the mushy layer increases and the mushy layer becomes stable to the compositional convection. The critical Rayleigh number obtained from the continuity conditions of temperature and heat flux at the mush-liquid interface is smaller than that from the isothermal condition at the upper boundary of the mushy layer.

• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.313-320
• /
• 1993

A sublimation model of the freeze drying process, which accounted for the removal of free water, was presented and used to study the operation conditions of freeze driers for carrot juice. It was found that the shortest drying time was obtained when the condenser temperature and chamber pressure were kept at heir lowest values and the plate temperature was controlled independently so that the scorch and melting constraints were both held throughout the drying period. The effect of sample thickness on the drying time was significant. Optimal policies were investigated experimentally in laboratory freeze dryer.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.12a
• /
• pp.39-50
• /
• 1993

최근 회전계의 고속화, 소형화 및 정숙운전에 대한 요구가 엄격해짐에 따라 볼베어링을 저어널베어링으로 대체하는 흐름이 증가하고 있으나, 저어널베어링의 기본 구조상 운전시 여러 종류의 진동모드가 발생되며 이에 따라 엄밀한 설계가 요구된다. 이러한 요구에 따라 본 연구에서는 불안정성을 억제할 수 있는 것으로 알려진 빗살무늬 저어널베어링을 대상으로 하여 보다 정확한 설계를 위한 수치해석 프로그램을 개발하였다. 빗살무늬저어널베어링의 해석법으로는 간극의 비선형성을 단순화 시키기 위하여 무한홈을 가정한 협곡이론을 시초로 하여 최근에는 컴류터 계산속도의 발달로 실제 형상에 대해 해석한 직접계산법 등이 알려져 있다. 직접계산법은 협곡이론에 의한 계산법에 비해 많은 시간이 걸리는 단점이 있으나, 베어링이 소형화되어 실제 많은 홈을 가공하기 힘들거나 홈이 원호형으로서 직각홈으로 가정하기가 곤란한 요소에서는 협곡이론을 적용하는데 무리가 있을 것으로 사료된다. 따라서 본 연구에서는 직접계산법을 채택하여 소형 베어링 모델에 대한 부하특성을 수치해석하고, 이를 협곡이론과의 비교를 통하여 그 차이점을 검토하였다. 이를 위해 압축성을 고려한 레이놀즈 방정식에 대한 베어링 주위의 압력분포를 계산하는 프로그램을 제작하였으며, 주어진 설계조건하에서 빗살무늬 형상을 결정하는 피라미터들의 최적값을 산출하고, 아울러 플레인저어널베어링과의 비교를 통하여 설계조건에 따른 빗살무늬저어널베어링의 기존 불베어리의 대체 가능성을 평가하였다.