• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.72-83
• /
• 1997

The purpose of present study is to find an appropriate hull shape of a container ship which can operate along the coast and through canals. A 200TEU class container ship is designed with dimensional modifications of an existing 140TEU container ship which is a domestic coastwise vessel. For the fore-body shape including bulbous bow. additional modification is done by changing the sectional area curve and frameline shape using the data of series resistance test. The model tests are performed in the towing tank to measure total resistance sinkage and trim of the model. And a finite-difference method based on MAC method is utilized to analyze the flow field around the ships in deep and restricted water. From the result of model test and numerical analysis, the resistance characteristics of the designed hull form are predicted.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.269-276
• /
• 1985

본 논문에서는 이러한 두꺼운 3차원 난류 경계층의 체계적인 연구를 위하여 적합한 수학선형을 개발하고 저속풍동에서 경계층 실험을 수행하였다. 이 수학선형 은 가능한 실제 선체주위의 유동특성이 잘 나타나도록 설계되었다. 실험을 통하여 전체적 유동을 파악하고 표면에서 평균 속도분포, 마찰저항계수 및 각종 적분변수들을 측정하였다.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.67-73
• /
• 1997

CFD 연구를 초고속선 선형개발에 활용한다면 선체주위의 유동장 계산결과로부터 압력 및 속도, 자유표면 파고분포 등 초고속선의 설계 및 기본계획 단계에서 필요한 저항 및 추진성능 자료를 얻을 수 있다. 이러한 기능을 더욱 개선 발전시키면 선형개발에 더 많은 적용이 예상된다. 또한 항주 시간에 따른 초고속선의 운동특성을 고려할 수 있게 된다면 앞으로 항주자세제어 및 내항성능과 승선감의 추정도 CFD 연구를 통해서 가능하리라 믿는다. 이제 국내 조선소를 중심으로, 21세기에 도래할 것으로 예측되는 고속 해상수송 수단에 대한 수요에 대응하고 조선기술의 우위확보를 위해 고부가가치, 고성능이 요구되는 초고속선 기술개발에 연구를 집중해야겠다.

• Journal of the Korean Institute of Navigation
• /
• v.12 no.3
• /
• pp.23-37
• /
• 1988

This paper deals with the method of determining the drag of hull surface which has any quality of roughness. The method consists mainly of the theoretical point of view, then the theory enables the drag coefficient to be calculated at full scale. The hydrodynamical roughness function of hull surface ${\triangle}U_+$, affected by the hull roughness are considered as to two cases, smooth surface and rough surface case separately. The inadequacy of a single parameter to define hull roughness is discussed and thus an as additional texture parameter is proposed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.159-164
• /
• 2016

It is one of the important processes to predict the resistance of the towed ship when towing a disabled ship on the sea. Besides the basic resistance of hull itself, there are various added resistance, especially the added resistance due to waves can be considered one of the biggest component. In this paper, the algorithm which predict the added resistance due to waves of a disabled ship by theoretical analysis method of ISO 15016 standard was established, and realized as a computer program. The calculated result for an example ship was compared with existing standard one, and it is considered that this algorithm and computer program are appropriate to use for predicting the resistance and towing force of the disabled ship actually.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.28-39
• /
• 1991

A study on the optimization problems to find forebode shapes with minimum wavemaking and frictional resistance was performed. The afterbody was fixed as a given hull and only forebode offsets were treated as design variables. Design variables were divided into the offsets of given hull and small variation from them. For the wavemaking resistance calculation, Neumann-Kelvin theory was applied to the given hull and thin ship theory was applied to the small variation. ITTC 1957 model-ship correlation line was used for the calculation of frictional resistance. Hull surface was represented mathmatically using shape function. As object function, such as wavemaking and frictional rersistance, was quadratic form of offsets and constraints linear, quadratic programing problem could be constructed. The complementary pivot method was used to find the soulution of the quadratic programing problem. Calculations were perfomed for the Series 60 $C_{B}$=0.6. at Fn=0.289. A realistic hull form could be obtained by using proper constraints. From the results of calculation for the Series 60 $C_{B}$=0.6, it was concluded that present method gave optimal shape of bulbous bow showing a slight improvement in the wave resistance performance at design speed Fn=0.289 compared with the results from the ship theory only.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.29-34
• /
• 2000

This paper describes a numerical study to make clear the characteristics of flow around a high speed catamaran hull advancing on calm water. The simulation is carried out at Froude number of 0.5 with a separation to length rations of 0.2 to 0.5. To simulate the flows, the Navier-Stokes solver is employed in which the free surface condition is included. Computations are performed in a rectangular grid system based grid system based on the Marker & Cell method. For the validation, the computation results are compared with the experiments.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.202-207
• /
• 2001

The added resistance of a ship advancing in waves can be split into the resistance due to the radiation wave and the resistance due to the diffraction wave. In this study, the former has been calculated by a method based on Maruo's formula. The latter must be calculated by other methods. Ship motion is calculated by the usual strip method. The amplitude of two dimensional far-field waves is calculated using the improved Green integral equation. The present numerical method can be used for the estimation of the added resistance due to the radiation wave since the present numerical result is much smaller than other existing numerical results considered to be overestimated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.218-219
• /
• 2018

쌍동선형은 단동선형에 비해 안정성 및 저항성능이 우수하며 그 형상은 일반적으로 대칭 및 비대칭으로 구분한다. 이러한 쌍동선은 고속으로 운항하는 경우 선체사이의 파랑 중첩현상을 줄이기 위해 주로 비대칭선형을 사용한다. 또한, 중소형선박은 선미터널을 적용하여 추력효율을 향상시킨다. 본 연구에서는 비대칭 고속 쌍동선의 선미터널 입구영역의 경사각 변화에 따른 유체역학적 특성(저항성능, 항주자세, 압력분포)에 대한 수치해석 연구를 수행하였다. 수치해석은 상용프로그램 STAR CCM+를 이용하였다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.582-587
• /
• 2016

연료효율에 대한 선주들의 요구와 그린쉽이라는 사회적 흐름에 맞춰 현재 연료 절감 장치에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 KVLCC2M의 반류개선 및 연료효율 증가를 위한 반원형 덕트의 변수 연구를 진행하였으며, 계산의 신뢰도를 검증하기 위해 서울대학교 선박저항성능 연구실에서 실시한 모형 시험결과와 비교하였다. 반원형 덕트의 크기와 길이방향 위치를 설계변수로 설정하여, 총 12가지 경우에 대한 CFD 계산을 시행하였으며, 계산 결과를 유동 정류를 통한 저항 감소와 반류 개선을 통한 프로펠러의 성능 개선 이라는 두 가지 기준으로 최적 조건을 선정하였다. 또한, 후처리를 통해 계산 결과를 추가적으로 분석하여 에너지 절감의 이론적인 배경을 찾았으며, 이를 바탕으로 반원형 덕트를 개선하여 부채꼴형 덕트를 새로이 설계하였다. 이에 대한 추가적인 계산 결과 최대 4%의 연료절감 효과를 최종 확인하였다.