• Journal of the Korean Society of Radiology
• /
• v.2 no.1
• /
• pp.23-29
• /
• 2008

The present study proposed a method that dissolves ultrasonographic images into multiple resolutions using wavelet conversion and a boundary detection filter and improves the quality of ultrasonographic images through boundary detection filtering. In order to reduce noises and strengthen edges, the proposed method adjusted selectivity coefficient by area step by step from a low resolution image obtained from wavelet converted images to a high resolution image and performed edge filtering in consideration of direction. Through this method, we generated a selective low pass filtering effect in areas except edges by decreasing the wavelet coefficient for pixels in spot areas, improved continuity by smoothing edges in the tangential direction, and enhanced contrast by thinning in the normal direction. Through an experiment, we compared the filtering method using a non linear anisotropic expansion model and the filtering method using wavelet contraction structure in single resolution.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.356-362
• /
• 1999

Based on the assumption that film density increases exponentially with exposure in the industrial radiographic film. an equation representing the characteristic curves of industrial radiographic films and a new density-thickness relation are suggested. The accuracy and reliability of the suggested relation has been tested using radiographs of a carbon steel step wedge with known thickness variation by polychromatic X-ray and ${\gamma}$-ray ($Ir^{192}$). The experimental results were well agreed to the proposed relation in the range of film densities from 1.0 to 3.5 and it was more accurate than the conventional relation. It is also found that ${\gamma}$-ray is more effective in this purpose than polychromatic X-ray, which results in variation of effective linear absorption coefficient due to beam hardening effect as thickness increases. Therefore using the equation and experimentally determined parameters the quantitative evaluation of thickness variation is possible and it can be used to evaluate the depth of local corrosion of pressure vessels in plants.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.103-110
• /
• 2008

A reliable extraction of welded area is the precedent task before the detection of weld defects in industrial radiography. This paper describes an attempt to detect and extract the welded features of steel tubes from the computed radiography(CR) images. The statistical properties are first analyzed on over 160 sample radiographic images which represent either weld or non-weld area to identify the differences between them. The analysis is then proceeded by pattern classification to determine the clustering parameters. These parameters are the width, the functional match, and continuity. The observed weld image is processed line by line to calculate these parameters for each flexible moving window in line image pixel set. The local statistic line-clustering method is used as the classifier to recognize each window data as weld or non-weld cluster. The sequential procedure is to track the edge lines between two distinct regions by iterative calculation of threshold, and it results in extracting the weld feature. Our methodology is concluded to be effective after experiment with CR weld images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.253-259
• /
• 2004

The sheetwise cadastral map data needs to become a Serial Cadastral Map (SCM) database for the promotion of the reliability of cadastral surveying, for the efficient operation of the Parcel Based Land Information System, and for the convenient use of land information as well. A large amount of money and time are required for the editing process of producing SCM DB in accordance with the $\ulcorner$Guideline for the Production of Serial Cadastral Maps$\lrcorner$ by the Ministry of Construction & Transportation if any of field surveying techniques is accompanied by. In addition, a boundary line that extends to a neat line does not meet the counterpart of the neighboring map sheet at a point. Such cases frequently occur and are much dependent upon the decisions of individuals in charge of editing or inspecting. The core processes of the research, firstly overlay SCM produced by the edition of the sheetwise cadastral maps with Autodesk Map on orthophoto images, secondly adjust the parcel boundaries which are delineated over more than one map sheet, and lastly compare the original boundary coordinates and areas with the corresponding adjusted ones and calculate root mean square errors (RMSEs). The research aims at promoting the quality of SCM by minimizing the inconsistency of parcel boundaries by means of the comparative analysis of the calculated RMSEs.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.53-58
• /
• 2006

The aim of this paper is to verify the dynamics stability of the continuous PSC Box bridges on the high-speed Kyoung-bu railway when a high-sped train runs through it. An experimental study was carried out to investigate the dynamic behaviors of the PSC Box railway bridge, which had ben designed based on dynamic design criteria. As a result, it was determined that PSC Box railway bridges possess enough dynamics stability for use by high-speed trains. According to the result of a field test (dynamics measuring analysis) that was conducted, an application of the natural frequency of train speed and the adjustment of the bridge's span length will allow one to come up with a more economical and suitable bridge design. Furthermore, it was found that the continuous control of the bridge's dynamic behavior and the bridge's maintena nce require the recording of data. The results of this study are very important in evaluating the structural stability of high-speed line bridges.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.10-13
• /
• 1993

최근 일본 조선업계는 엔고로 약화된 가격경쟁력을 회복하기 위해 다각적인 방안을 강구하고 있다. 한국, 중국 등 해외로부터 선박용 부품의 조달을 확대하는 한편, 기업간 사업제휴의 강화와 생산성 향상을 통한 원가절감에 주력하고 있다. 또한 1990년대 중반 이후에 대형탱커를 중심 으로 노후선의 대체수요가 본격화될 것에 대비, S＆B(Scrapping and Building)방식 및 연속건 조방식을 적절히 활용하여 우회적으로 건조능력을 확대하고 있다. 그러나 대외적으로는 통산마 찰을 우려하여 현재의 총설비능력을 유지한다는 입장하에 설비신증설을 억제하고 있다. 한편 정부차원에서는 조업량 규제 해제, 기존설비규제의 완화 및 암목적으로 기업이 선박건조량을 확대할 수 있는 여건을 조성하고 있다. 이러한 정부시책에 힘입어 기업차원에서는 설비현대화 및 자동화의 투자를 확대하며 고용인력도 증원하고 있다. 이와 병행하여 단기적으로는 가스운반선, 자동차 운반선, 고속여객선 등 고부가가치선종의 수주 확대를 도모하고 중장기적으로는 초고 속선, 초전도선 등 차세대선종의 연구개발을 적극 추진하고 있다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.54-58
• /
• 2006

This paper deals with primary consideration in down-conductor system and earth-termination system design of apartments. For down-conductor system, steelworks within reinforced concrete apartment structures have the electrical continuity, however, lashing is not suitable for lightning-current-carrying connections. So this paper suggest that the additional dedicated conductors should be installed and they are should be lashed to the reinforcement steel. Also this paper suggested the foundation earth electrode and global earth system as the earth-termination system of the apartments. But perfect bonding system is essential in lightning protection system to avoid life hazard and to protect electronic equipments.

• Journal of KIISE:Software and Applications
• /
• v.33 no.9
• /
• pp.741-750
• /
• 2006

In this paper, we propose a method for reconstructing a 3D object (or a set of objects) from a 2D drawing provided by a designer. The input 2D drawing consists of a set of contours that may partially overlap each other or be self-overlapping. Accordingly, the resulting 3D object(s) may occlude each other or be self-occluding. The proposed method is composed of three major steps: 2D contour analysis, 3D skeleton computation, and 3D object construction. Our main contribution is to compute the 3D skeleton from the self-intersecting 2D counterpart. We formulate the 3D skeleton construction problem as a sequence of optimization problems, to shape the skeleton and place it in the 3D space while satisfying C1-continuity and intersection-free conditions. Our method is mainly for a silhouette-based sketching interface for the design of 3D objects including self-intersecting objects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1054-1062
• /
• 1991

In this paper a communication system using direct sequence spread spectrum (DS/SS) technique is constructed to transmit burst format data over power line channel with impulsive noise and narrowband interferences. Fast code synchronization is acquired by digital matched filter and data decision is accomplished by sampling pulses. In order to examine the performance of the power line communication system, but error rate and packet loss rate are measured over the simulation channel with various noise sources. When the packet composed of 1-bit preamble and 63-bit data is transmitted under very high burst impulsive noise, the bit error rate is about 10$^3$-10$^4$ and the packet loss rate is below 0.07.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1996.11a
• /
• pp.97-101
• /
• 1996

산림부산물인 수피에 의한 카드뮴 이온의 선택적 흡착 현상을 이용하여 인공폐수로부터 카드뮴이온의 제거를 시도하였다. 카드뮴 이온 선택성이 우수한 소나무와 상수리 나무의 수피를 이용한 효율적인 연속식 대량 수처리 시스템의 개발을 위한 기초 실험으로 카드뮴 이온흡착 등온선을 조사하였고, batch stirred reactor, airlift reactor, packed bed column 등 여러 접촉시스템에서의 카드뮴 이온의 제거 효율을 검토하였다. 카드뮴 흡착등온선은 두 수피 모두 Langmuir 형식으로 나타났으며 소나무 수피의 최대흡착용량은 약 7 mg/g, 상수리나무 수피의 경우에는 약 8 mg/g 정도로 나타났다. Batch stirred reactor를 이용한 시스템에서 초기농도 13 ppm의 카드뮴용액 100 $m\ell$ 을 수피 10 g 과 접촉시킨 결과 30분 이내에 95% 이상 제거되는 효율성을 보여주었다. Airlift reactor를 이용한 시스템에서는 수피 30 g 을 포기농도 10 ppm 카드뮴 용액 1 liter와 접촉시킨 결과 15분 이내에 93 % 이상 제거되었으며 4 cycle 반복 운전에서도 거의 같은 성능을 유지하였고 그 이상의 cycle에서는 점점 성능이 떨어짐을 보여주었다. Packed bed column을 이용한 시스템에서는 20 g의 수피를 충전시켰을 경우 초기농도 20 ppm에서 effluent 2.5 liter 까지는 95% 정도의 제거효율을 보여주었다.