• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.37-50
• /
• 2007

The test result is a part of a study on the reduction of fuel expense. the test was conducted in the ship of east sea fisheries supervision office which is modified from 139 ton trawler to 183 ton petrol ship. The result of NOx emission and Smoke Value for main engine and generator engine are measure and included in this paper. The information on pre-treatment systems and measuring equipment also includes.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.112-113
• /
• 2011

선박으로부터 배기오염에 대한 국내의 관련 규제들이 강화되면서 관련 기술 개발이 급격하게 이뤄지고 있다. 그 중 탱커선의 화물탱크로부터 배출되는 유중기를 대기중으로 방출하지 않고 회수할 수 있는 설비 관련기술이 개발되고 있다. 회수설비 중 포함되는 스크러버는 가스 속의 부유 고액 미립자를 액을 이용하여 포집하는 장치로서, 스프레이 노즐을 통해 액을 분사하며, 일반적으로 물을 사용한다. 고효율 스크러버 설계기술 개발을 위해 스크러버용 노즐의 성능해석과 유동가시화 실험을 통한 내부유동 특성을 연구하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.167-169
• /
• 2018

2020년부터 전 세계적으로 IMO 선박연료유 규정은 한층 강화될 것으로 예상되며, 일부 지역은 배출규제해역(Emission Control Area; ECA)를 지정하여 선박으로부터 배출되는 대기오염물질을 통제하고 있다. 우리나라는 항만도시의 대기오염 정도가 높으며 대기오염물질의 주요 배출원은 선박으로 밝혀지고 있어 이에 대한 대책으로써 ECA 지정을 위한 검토가 시급하다. 본 연구에서는 국내 항만을 대상으로 ECA 지정 필요성을 검토하고 우리나라 여건에 적합한 ECA 지정방식과 절차 등 종합적인 도입방안을 제시하는 것을 목적으로 한다. 연구목적 달성을 위해 우리나라 항만도시의 대기환경 현황을 분석하고, 해외 ECA 지정 사례 분석을 통해 그 지정현황, 규제 수준 및 효과를 파악하였다. 또한 ECA 도입 타당성을 제시하기 위해 항만도시 거주민과 업계 종사자를 대상으로 수행한 설문조사 결과를 활용하였다. 결과적으로, 우리나라의 ECA 도입은 필요하며 향후 5년을 목표로 단계적으로 추진하는 것이 바람직하다. 우선적으로 자발적으로 영해 내 ECA 도입을 추진하되, 선박 통항량이 많은 주요항만구역을 대상으로 한다. 제도의 초기 장착을 위한 인센티브 제도 마련, 관리인력 확보 및 법 제도 구축을 통해 실효성을 확보하도록 해야 한다. 장기적으로는 IMO 승인을 통해 ECA가 이행될 수 있도록 타당성 조사가 선행되어야 한다.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.157-162
• /
• 2003

The sludge oils were produced necessarily in the ships operation, so that it will be the best way to manage the sludge oils inside ship itself from a viewpoint of the prevention of marine oil pollution from ship. The ultrasonic breaking systems which recycle the sludge oil from ship into usable oil to be brunt is recognized as a most possible recycling device. In this regards, the purpose of this study is to examine erosion damage on the SS400 specimen by cavitation and the effect of impact pressure generated from the demolition of the cavity of ultrasonic vibration in the marine sludge oil environment .. The erosion damage of specimen was investigated mainly on weight loss, weight loss rate and maximum erosion rate with variation of the oil temperature as well as the change of space between transducer horn and specimen. The experimental results showed that as the space between ultrasonic vibrator horn and specimen disk increased, the weight loss and weight loss rate decreased and the values were larger in SFO than in SLO. The experimental results can be useful to the development of sludge oil disposing systems and to consider a countermeasure for the prevention of erosion damages by cavitation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.155-156
• /
• 2015

최근 선박의 연료유 절감 및 경제운항에 대한 관심이 높아지면서 조선소를 중심으로 운항정보의 활용과 관련된 다수의 프로젝트가 진행되고 있으며 선박 설계, 기상예보 등을 통합한 다양한 시스템이 개발되는 등 선박의 최적운항지원 솔루션 시장이 빠르게 성장하고 있다. 하지만 현재 시장을 주도하고 있는 솔루션들은 설계정보를 중심으로 개발되어 선박을 운영하는 해운선사에서 요구하고 있는 성능기준을 만족하지 못하는 단점이 있다. 따라서 본 연구에서는 운영단계에서 축적되는 운항데이터와 해운선사의 경험과 노하우에 대한 정보가 반영된 경제운항 알고리즘을 개발하기 위한 현황 분석을 수행하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.773-778
• /
• 2015

Global warming has recently become an issue that has resulted in a growing trend to minimize environmental pollution. The International Maritime Organization (IMO) has shown that the majority of marine atmospheric pollution occurs as a result of emissions from marine vessels. Therefore, the environmental regulations and emission standards regarding marine vessels have gradually become stricter, and the research and development in this area is experiencing significant progress. In this study, a nozzle for a fuel oil scrubber was investigated using computational fluid dynamics (CFD) and particle imaging velocimetry (PIV). Experiments were conducted on scaled-down model of the scrubber to determine its performance, which was then compared with CFD results. Based on the experimental results, it was found that at a spray angle of $66^{\circ}$, the spray velocity at the nozzle was 20.1 m/s. From this comparison, a full-scale scrubber model was analyzed using CFD, and the effect of the positioning of the nozzle was studied.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.113-118
• /
• 2021

The International Maritime Organization (IMO) has confirmed a global limit of 0.5 % for sulfur in fuel oil used on board ships with effect from January 1, 2020. Among various alternatives to respond to these regulations on sulfur content in fuel oil, such as LNG ships, SOx scrubbers, and very-low-sulfur fuel oil (VLSFO). VLSFO is preferred owing to its low investment costs. As more ships are expected to use VLSFO, VLSFO spills are expected to increase. In particular, when the seawater temperature is below the pour point of VLSFO, VLSFO solidifies when it is spilled, which makes controlling spills difficult. In this study, six types of VLSFO produced in Korea and one type of high-sulfur fuel oil (MF380) were compared in terms of the dispersibility of dispersants according to the seawater temperature conditions. The results confirmed that the six type of VLSFO did not satisfy the domestic standards for dispersant rate (60 % or more for 0.5 min, 20 % or more for 10 min). Morever, the dispersant rate of the six types of VLSFO was low compared with that of the high-sulfur fuel oil. The results of this study are expected to be used to set the direction of dispersant control in the case of VLSFO spills.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.381-386
• /
• 2015

Environmental pollution and alternative energy has attracted increasing interest. The use of diesel engines is expected to increase in the world owing to their fuel economy. The problem of air pollution emissions from marine engines is causing a major concern in many areas. An alternative fuel was introduced as an environmentally friendly fuel to reduce the toxic emissions from conventional fossil fuels. Biodiesel fuel, which is a renewable energy is highlighted as environmentally friendly energy. This energy can be operated in regular diesel engines when it is blended with invariable ratios without making changes. In this study, a bio-diesel fuel was produced from waste cooking oil and applied to a marine diesel engine to examine the effects on the characteristics of combustion. Waste cooking oil contains a high cetane number and viscosity component, a low carbon and oxygen content. As a result, the brake specific fuel consumption was increased, and the cylinder pressure, rate pressure rise and rate of heat release were decreased.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.98-103
• /
• 2017

In this study, contributes to improving the state of this problem using cavitation by ultrasonic energy to reduce fuel costs, which take up a considerable part of ship operation costs, by making the use of on-board blended fuel oil more stable. An experiment simulating on-board blending methods was completed. Fuel (M.G.O & MF-180) was mixed at a volume ratio of 0.25:0.75 and, 0.75:0.25, and the effect of ultrasonic energy on blended fuel oil was examined after applying ultrasonic energy to blended fuel oil using an ultrasonic treatment unit. With the results, we confirmed the blending problem reported by vessels and residual carbon was reduced by up to 28.4%. In addition, based on the results for reduction of residual carbon content and dispersion stability, it was confirmed that the collapse pressure of the cavity due to the ultrasonic energy was effective to atomization of fuel particle and the temporary availability of mixed fuel containing a heavy fuel increased.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.962-968
• /
• 2013

Problem of greenhouse gases associated with global warming and the world rise in fuel oil prices due to the depletion of fossil fuel has attracted attention. For this reason, maritime transport business, has shown interest in green-ship technology to reduce the consumption of fuel and reduce greenhouse gas for environmental protection. Power system of the ship is one of the most important factors for safe operation. Therefore, at design of ship power system, most of existing vessel used comparative large capacity generator in order to respond peak load such as bow thruster, crane and etc. In the navigation of ship, marine generators most would be operated at low load operation. In the low load operation of the generation rate of 50% or less, the operation efficiency of the generator it deteriorated, to consume more fuel oil. It also, it means that adversely effect the life of the generator. In this paper, studied how to apply for a secondary battery in container ship that relatively frequent arrival and departure in port. As a result, in order to apply the secondary battery to increase the operating efficiency of the generator during the voyage, it was confirmed that it is possible to reduce fuel consumption.