• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.67-73
• /
• 2016

This study analyzed the state of the vessels which were using the berth for dangerous goods more than its carrying capacity in the major dangerous cargo handling port of Ulsan in Korea, The result of the analysis showed that a ship which has 3 times more than the maximum berthing capacity was moored at berth. Accordingly, a simulation model for 50,000 DWT berth was built and carried out the mooring safety analysis with 50,000 DWT, 70,000 DWT and 100,000 DWT vessels by mooring assessment program. The evaluation was carried out according to the standard environment presented in OCIMF standards. 50,000 DWT vessel was evaluated to meet the acceptable criteria but, 70,000 DWT and 100,000 DWT vessels exceeded the acceptable limit as per external conditions. Consequently, safe mooring guidelines were suggested and also proposed the building of common 'Mooring safety guideline' for port with assessment of different cases.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.223-228
• /
• 2007

In recent trends of the enlargement and specialization, container ship, LNCG, PCC and passenger ship which have relatively large hull and superstructure above the water line, are already being operated in the world It is very important information for the safety operation of these vessels to estimate the ship's performance under the specific wind condition while berthing, unberthing or low-speed sailing. In this paper, the effect of wind force and moment acting on the training ship HANNARA is investigated by using the numerical calculations. The results of drift angle and counter rudder angle with the relative wind direction and force, the critical wind velocity with the ratio of wind velocity and ship's speed and maximum heeling angle with the wind velocity are shown The presented results can be applied directly to T/S HANNARA in berthing maneuver and avoiding typhoons, and utilized as an educational materials.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.191-197
• /
• 2016

The shaft system of a vessel becomes stiffer because of larger engine power, whereas the hull structure becomes more flexible because of scantling optimization conducted by using high-tensile thick steel plates. The draught-dependent deformation of the hull affects each bearing offset and reaction force comprising the subsequent shaft system. This is the reason that more sophisticated shaft alignments are required. In this study, an FE analysis performed under the expected operating conditions of two (2) vessels, as maximum draught change and to analyze the shaft alignment using the relative bearing offset change, which was derived from an FE analysis of the 50,000 DWT oil/chemical tanker, which has become an eco-friendly vessel in recent years. Based on this, the influence of the hull deflection on the bearing offset was reviewed against results for shaft alignment conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.929-934
• /
• 2015

Because of the recent rapid advances in the development of ships with a larger proportion of electrical and electronic equipment, The usable frequency spread spectrum on ships is global trend. Therefore, concerns have been raised regarding the possible hazardous health effects of electromagnetic fields radiating from electronic devices. Although studies and investments on electro-magnetic fields in terrestrial areas are being conducted, they are not applied to a ship. In this paper, we measured electromagnetic fields in ship propulsion systems, and we analyzed the measured values against Korean and international standards. While the measured results satisfied the Korean standard, the Italian standard was not met in the switchboard area. However, the measured values were close to meeting the Italian standard. Therefore, further studies should be conducted for performing a comparative analysis of data in order to specify a standard of electromagnetic fields in propulsion systems that can be applied in the construction of government infrastructures.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.259-260
• /
• 2010

선박의 대형화 추세와 더불어 세계 항만들이 급성장하고 있는 실정에서 각 항만들은 경쟁력 우위를 확보하기 위해 많은 전략을 추구하고 있다. 이러한 국제환경으로 인해 기항지 축소가 이루어지며 세계 주요 항만들은 증가하는 물동량을 처리하기 위하여 지역간 Hub항만을 추구하고 있다. 본 논문에서는 기존의 항만선택결정요인의 연구를 살펴보고 재정립함으로써 국내에 있는 중소형항만들이 향후 나아가야 할 방향성을 제시하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.112-114
• /
• 2017

선박의 대형화, 해상물류 생산성 및 환경보존의 중요성이 증대함에 따라 다양한 부문에서 eNavigation 서비스가 요구되고 있으며 변화하는 기술환경이 고려되어야 한다. 항해안전과 효율성, 환경 등 다양한 수요를 고려하여 신뢰할 수 있는 최신 수로측량정보를 확보해야 한다. 본 연구에서는 다양한 목적에 효과적인 eNavigation 서비스가 제공될 수 있도록 수로측량정보 활용방안을 제시하고자 한다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1998.09a
• /
• pp.138-142
• /
• 1998

연안 구조물의 대표적인 형식인 경사식 방파제 또는 호안의 축조시에 이형블럭을 전면에 피복하여 사석부의 제체를 보호하는 형태가 널리 채택되고 있다. 이러한 연안 구조물의 축조 형식은 오랜 경험 및 피복용 이형블럭의 고안과 더불어 변형, 발전된 공법이다. 최근 물동량의 증가 및 선박의 대형화 등으로 인해 기존 항만의 확장시에 대수심 쪽으로 전진, 배치되는 추세에 있으므로 대파랑에 대응하기 위한 피복재의 중량 증가가 예상된다. (중략)

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.15-20
• /
• 2017

The International Maritime Organization(IMO) has adopted and implemented compulsory regulation for reducing greenhouse gas emission that cause global warming. However, with global warming underway, the IMO plans to enforce voluntary carbon dioxide emissions reduction based on the Ship Energy Efficient Management Plan and the Energy Efficiency Operational Indicator(EEOI) in the near future. Large container ships sail at low speeds in order to save fuel and reduce carbon dioxide emissions. However, bulbous bows designed for high-speed ships decrease fuel efficiency by acting as resistance when reduced speeds are adopted by large container ships. In order to adopt low-speed operations and increase fuel savings, the bulbous bow of a large container ship was modified into the proper shape and size. Fuel consumption was compared for checking the result of EEOI before and after modifying the bulbous bow adopted on low speed operation of large high-speed ships. The results confirmed much larger carbon dioxide emissions reduction than expected. If EEOI would be implemented as compulsory regulation for reducing carbon dioxide emissions, bulbous bow modification can be considered as one of the fuel saving methods for the high-speed ships.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.327-330
• /
• 2014

해양수산부 소속의 한빛호는 국내 유일의 부표정비와 항로표지 측정업무를 수행하는 항로표지 업무용 선박이다. 이 선박으로 연중 국내의 400mm 이상 중, 대형등명기의 광도값을 측정하여 분석평가하는 광파측정업무를 수행하고 있으나, 광파측정 시 환경적, 물리적, 제도적인 어려움으로 인하여 정기검사 수검에 어려움이 발생하고 있다. 이 방안에서는 그런 여러 가지 문제점을 해결할 수 있는 육상측정을 기본으로 효율적이고 안전하며 예산 또한 절감할 수 있는 방안들을 제시하고자 한다.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.174-180
• /
• 2020

With the removal of underwater obstacles in the Busan New Port, the water depth of the pier has been secured up to 17m, and the port authority is constantly responding to the trend of container vessels becoming larger. Also, in 2020, 24,000TEU class container ships are entering to the port, and it is planned to secure the depth in the port to 23 m later in line with this trend. Mega container ships must check in advance the factors to be considered depending on the situation at the time, and for this, it is judged that information sharing among stakeholders is necessary. In this paper, to understand the effect of the corresponding route because of the mega container ships, a transit safety evaluation was conducted based on statistical data on ship entry and departure and maneuver characteristics of corresponding ships. The result showed that the transit of the mega container ships has increased up to 8.4% comparing to the risk of 4,000TEU class container ships. Additionally, safety measures such as minimum safety depth and tug operation plans were presented by gathering opinions on operational characteristics from the perspective of pilotage for safe transit in the Busan New Port area. Through this, it is considered that it will be possible to contribute to the prevention of accidents when entering and leaving the Busan New Port.